Tender For Repair/Replacement Of Ht/Lt Oh Line, Ug Cables And Lt Panels And Misc Ht/Lt Line Works At Artc & S, Diphu (Assam)
Tender Value
19.99 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
3 days left
EMD
40000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karbi Anglong → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Ht/Lt Oh Line, Ug Cables And Lt Panels And Misc Ht/Lt Line Works At Artc & S, Diphu (Assam)
BOQ
| Sl. No. | Item Description |
| 1 | Supply and erect 2 pole structure complete on 11 meter steel tyubular pole consisting of anti climbing device, PCC foundation and cross arms complete all as specified and directed by Engr -in- Charge. |
| 2 | Supply and fix lightning arrestor HT 11 KV 10 Ka station class complete |
| 3 | Supply and stacking and spreading levelling at site stone gravel 40mm size for transformers complete. (2x3x3x.45=8.1 cum) |
| 4 | Supply and fixing 65x65x6mm thick angle iron embeded to existing PCC block for chain link fencing complete. (2x125 = 250 kgs) |
| 5 | Providing and fixing GI chain link fencing of required mesh size 50x50mm grade of GI wire 3mm dia complete all as directed (2 Nos16x 2= 288 sqm) |
| 6 | Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of cables/pipes etc. and getting out in soft/loose soil complete all as specified and directed. |
| 7 | Returning filling including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft soil complete all as specified and directed. |
| 8 | Removing excavated surplus soil not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed. |
| 9 | M&L for sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed. NOTE : Punned thickness shall be measured only. |
| 10 | Supply and laying dry well burnt locally available brick sub class 'B' modular bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed. |
| 11 | S & F for 40 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hardstanding including taking down existing pipe complete all as specified and directed.NOTE : Excavation and earth work shall be measured & paid separately. |
| 12 | Supply ,installation , testing and commisioning LT 415 Volts, 4 wire AC 50 HZ HUTTED ROOF CUBICAL , 3.15 mm thik CRCA Sheet and angle iron frame of size 50cmx50cmx6mm , 50cm long Factory made outdoor (Kiosk) type feeder pillar box weather and vermin proof of size 1.5x1.2x 0.5m and outside with approved paint over a coat of primer having degree of protection as per IP-43 complete locking arrangement comprising of 50mm size Godrej Pad Lock with duplicate keys , two earth terminal suitable cable glands for all incoming and outgoing cables removable nuetral link, connecting strip/ solid conductot brought out to cable chamber brass / copper nut, bolts/ eashers etc including grouting of feeder piller box 60 cm above ground level by providing 90 cm long angle iron of size 50x50x6mm welded on all the four comer embeded in PCC 1:2:4 using 20mm graded stone aggregate up to 30 cm ncluding taking out unserviceable existing panel complete all as specified and directed by Engineer -in- Charge including the following accessories / components complete all as specified and directed. Incoming :-(a) 4 Nos Aluminium Bus bar high conductivity -600 Amps duly insulated with adhaine tape.(b) MCCB 250 Amps Thermal realease 4 Pole 35 KA - 01 Nos Out Going :- (a) MCCB 160 Amps Thermal realease 4 Pole 25 KA - 02 Nos (b) MCCB 100 Amps Thermal realease 4 Pole 25 KA - 02 Nos (c) MCB TPN 40 Amps - 02 Nos (d) Amp Meter with selector Switch digital type of size 96x96mm 0- 300 Amps incl CTs - 01Nos(e) Volt Meter with Selector Switch digital type of size 96x96mm- 01 Nos(f) Indicator lamp RYB LED type - set of 03 |
| 13 | Supply and fix cable joint kit for 11 KV grade cable for outdoor termination, heat shrinkable type, joint complete with jointing material and accessories suitable for 3 core XLPE, armored, al conductor cable of size for cable of size 70 to 120 sqmm size. |
| 14 | Supply, install,test and commissioning of LT out door type kiosk pedastal panel board of sige 60 cm x60 cm x30cm for 3 phase 4 wire 415 volts 50 HZ system, made out of 3.15 mm thick CRCA sheet with powder coated mounted on PCC platform, hinges with locking door arrangement,suitable cable enteries holes at bottom,and consisting of the following:-(a) Aluminium bus bar of rating 400 Amps capacity 4 Nos(TPN) mounted on supporters with shrouded by PVC insulated and arrangements for incoming / outgoing connections. -01 set |
| 15 | S&F in repair for MCCB ,4 Pole MCCB 250 to 320 Amp, taking out old/ unserviceble MCCB complete all as specified and directed. |
| 16 | Earthing of machinery/equipment Installed at power house/substation, using 25 x 3 mm copper strip and copper plate of size 300 x 300 x 3 mm, as earth electrode. |
| 17 | Supplying and fixing line separator of approved brand and quality for fixing in between two conductors complete all as specified and directed. |
| 18 | Supply and fixing pin type Polymer type, vitreous, white, brown or green insulators including galvanized mild steel spindle, two galvanised iron washers and one galvanized iron nuts, 150 mm height 150 mm dia including section of straps of 38x5mm size 20mm dia of bolts, nuts & washers for 11000 volts grade complete. |
| 19 | Supply and fixing disc type insulator, Polymer type, vitreous white brown or green insulators for working pressure 11000 volt of 145 mm height 255mm dia ball and socket type Two-in-series assembly for tension with tension clamp for conductors including bolts, nuts & washers complete. |
| 20 | M&L for streatching of LT/HT overhead ACSR conductoe of any make all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender