Tender For Repair To Roof Treatment, Att & Other Misc Works At Otm Accn At Af Stn Jammu Under Ge(Af) Jammu
Tender Value
45 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
17 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Roof Treatment, Att & Other Misc Works At Otm Accn At Af Stn Jammu Under Ge(Af) Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling unservicable /cracked water tanks and removing from site capacity n exe 500 ltr complete all as spd and directed by Enr-in-charge.Add Note : Including demolition of existing RCC tank and making of brick pedstal for fixing new PVC water tank and removal demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same. |
| 2 | Description all as per Item no 01 above but 1000 Ltrs capacity.complete all as specified and directed by Engr-in-charge. |
| 3 | Supply and fixing in repairs Rotational moulded polythene water storage tanks (cylindered vertical closed top ) triple layered hoisted and fixed in position all as spd in SSR Part –I of capacity of tanks 500 ltrcomplete all as specified and directed by Engr-in-charge. |
| 4 | Discreption all as per Item no 03 above but 1000 Ltrs capacity.complete all as specified and directed by Engr-in-charge. |
| 5 | S&F in repair PVC Tank cover (thread type) for 250/500/1000 lit capacity.complete all as specified and directed by Engr-in-charge. |
| 6 | Taking down existing water proofing treatment with tarfelt including cement Plaster / HP tiles/ from roof or wall surfaces such as parapets / RCC fins of any type in any thickness including demolition of RCC tank/PVC tank and re-fixing the same with all required plumbing fittings like tank Nipple,float valve,tank cover,gate valves etc as per requirement of site and prepare the surface for new treatment.complete all as specified and directed by Engr-in-charge.Note :-Including Removal of debris or excavated material out of the defence line at govt approved dumping area and no extra cost will paid to the contractor against the same. |
| 7 | M&L for surface preparation & Cleaning the surface and made free of dirt, foregin particles laitance followed by grinding all protrusions to make surface modulated and including cement platering 20mm thick in cement mortar 1:4 incl mixing of liquid water proofing compound as per manufecturer instruction on surfaces of floor etc finished even and smooth without using extra cement and making grid of size 30cm x 30cm .Thereafter, inspection for cracks on the surface caused by thermal expantion contraction. Cutting the grooves with suitable cutter machine in 'V' groove filled with Repair mortar/Mircroconcrete/General purpose grout as recommended propertionaly as per recommendation of manufacturer. Making of Gollas at all the corners with Polymer modified mortar (1:4) Cement :Sand with 3.5% Acylic of Cement weight , Supplying and applying High build waterproofing coating based on pure hydrophobic polyurethane cold applied of spray /brush applied membrane with and elongation of 280% and tensile strength of 2.7 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, hardness (shore A scale) 80, solar reflectance of 84% as per A ASTM E903-96, SRI of 106, capilary absorption of 0.01kg/m2 h0.5 as per EN 1062-3, adhesion must be of ˃ 2.0 N/mm2 as per EN 1542, artificial weathering must be passed as per EN 1062-11 temprature resistance must be in between -300C to +900C, no leakage upto 5 bars of water pressure as per DIN 1048 mm min 88% solid content. The system includes final top coat of high build waterproofing coating based on pure hydrophobic polyurethane white in color application in 2 coats with a total min consumption of 1.5 Kg per SQM in ratio 60% 40% in both coats respectively over a coat of epoxy primer 1:1:2 (Resin:hardner:water) with a min consumption of 0.2 Kg per SQM. Application should be given by company for the product on company letterhead, complete all as specified and directed by Engr-in-charge. |
| 8 | Dismentling of RCC roofs ,shelves, facia beams ,chajjs and similar suspended work etc complete. Notes:-Demolished material should be thrown out of the defence line including loading,transportation,unloading of debris at govt approved dumping area.Also no extra cost shall be paid to the contractor by department. |
| 9 | M&L RCC 1:2:4 type B-1 (12.50 mm graded stone agg) as in shelves, facia beams ,chajjs and similar suspended work including necessary form work , scaffoholding upto 4th storey ht. of bldg etc complete. |
| 10 | Demolition of cement concrete (unreinforced) any description and in any position, not otherwise specifically provided for, all as specified and as directed by Engr-in-charge.Notes:-Demolished material should be thrown out of the defence line including loading,transportation,unloading of debris at govt approved dumping area.Also no extra cost shall be paid to the contractor by department. |
| 11 | M&L for making good the surfaces of chajja/Facia/ roof projection etc visible with reinforcement or not by providing PCC 1:2:4 type B-0, including one coat of bounding agent on rusted reinforcment and necessary formwork scaffolding required (hight of builing up to 4th storey) complete all as specified and directed by Engr-in-charge. |
| 12 | M&L TMT bars 8 mm dia cut length bent to shape required including cranking bending spirally for hooping for column , hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-charge. |
| 13 | M&L Providing cement concrete 1:2:4 type B0 using 12.50mm graded stone aggregate in roof levelling concrete, coping, etc. laid to slope for further treatment with using integral water proofing compound.ht of bldg up to 4th storey.(Note : WPC shall be measured and paid separately) |
| 14 | M&L for removing existing water proofing treatment on roof, clean with water and wire brush and applying oil bound primer @ 0.20 kg/Sqm and providing APP modified water proofing membrane weiging 3.0 kg/sqm and minimum 3mm thick reinforced with polyster non wave fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified laid overr a coat of of bitumen primer @0.30 Ltr/Sqm with applying a coat of hot blown bitumen of 85/25 or 95/15 @ 1.20 Kg/Sqm. APP membrance shall be laid by torching with 75mm overlap in longitudinal direction and 150mm overlap in transverse direction and finally fisished with a coat of solar reflective bituminous aluminium paint @ 100 grams/Sqm all as specified and as directed by Engr-in-Charge. |
| 15 | M&L post construction Anti-termite treatment at points of contact of wood work,plaster,concrete surface by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same.complete all as specified and directed by Engr-in-charge. Depth of the hole to be measured for payment purpose. |
| 16 | S&F Heat resisting terrace tiles (300x300x20 mm) with SRI (Solar refractive index)>78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface, laid on 20mm thick cement sand mortar in the ratio of 1:4 and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150mm height along the parapet walls in the same manner complete all as specified and directed by Engineer-in-Charge. |
| 17 | Taking down cement plaster up to 4th storey bldg ht.on Brick/stone walls and raking out joints, hacking for key, scrubbing down with water built in cement mortar.complete all as specified and directed. Notes:-Demolished material should be thrown out of the defence line including loading,transportation,unloading of debris at govt approved dumping area.Also no extra cost shall be paid to the contractor by department. |
| 18 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or over roof concrete surfaces mixed with integral water proofing compound finished even & smooth without using extra cement up to 4th storey bldg ht. Note : WPC shall be measured & paid seperately. |
| 19 | M&L rendering 05 mm thick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement . |
| 20 | Supply only integral water proofing compound ISI marked |
| 21 | M&L for Preparation of new plastered surfaces and applying two coats of exterial emulsion paint on walls including a thin layer of wall care putty,necessary formwork scaffolding required upto the 4th story complete all as specified and directed by Engr-in-charge. |
| 22 | M&L Prepration of new surfaces of ceiling and apply three coat of white wash on surface of ceilingcomplete all as specified and directed by Engr-in-charge. |
| 23 | S&F for viterous china wash down water close (Pedestral pattern) EWC white and mild steels chromium plated or aluminium hinging device and connecting to 'P' or 'S' incl flush pipe 32mm dia connecting with flushing rim complete all as specified and directed by Engr-in-charge. |
| 24 | S&F in Repair PVC seat cover for EWC white colour complete with MS Hinged cromium plated all as spd and directed by Engg-in-Charge |
| 25 | S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified . |
| 26 | S&F health faucet(ABS Body) mils steel CP sutabile for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed by Engr-in-charge. |
| 27 | S&F in repaired Vitreous china wash hand basin, white , flat back, size 550 x 400X150 mm with brackets,wall hung wash basin with half pedstal height 440mm including cutting for and pinning in ends of brackets or erecting stand including bottle trap connected to 32mm pvc pipecomplete all as specified and directed by Engr-in-charge. |
| 28 | S&F in repair stainless steel sink without draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 495mmx420mm with bowl size 410mm x330mm x 160mm complete all as specified and directed by Engineer-in- charge. |
| 29 | Supply and fixing in repair fancy type Angle valve cast copper alloy cromium Plated (CP) 15mm dia screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixedcomplete all as specified and directed by Engineer-in- charge. |
| 30 | S&F in repair 15mm dia Bib taps brass Cromium plated(CP) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.complete all as specified and directed by Engineer-in- charge. |
| 31 | S&F Kitchen plate rack, including shelves, made of stainless steel not less than 1mm thick with fixing acessories, overall size 750 mm x 600mm x 250 mm, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 32 | Dismantling existing unservicable floor/wall tiles of any description including bedding/screed layer complete all as specified and directed by Engineer-in- charge. Notes:-Demolished material should be thrown out of the defence line including loading,transportation,unloading of debris at govt approved dumping area.Also no extra cost shall be paid to the contractor by department. |
| 33 | M&L for Cement concrete chequered tiles 30cm x 30xm x22mm thick, machine pressed; set, jointed and pointed in net cement slurry in floors, and cut and polished with grey cement and no pigment, laid over 20 mm thick bedding layer of cement mortar 1:4 all as specified and directed by Eng-in charge |
| 34 | M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 35 | S&F 4mm dia galvanised steel wire chain link fencing size 75x75mm mesh including line wires any mesh size and type to any type or standards, rails, straining bolts etc including provision of binding wire including dismantling old uncerviceable chain link fencing any type any size complete all as specifid and directed |
| 36 | S&F galvanised 2nd stand steel wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provn of galvanised mild steel wire staples or steel pins etc as directed |
| 37 | Dismantling existing unservicable floor tile of any description including bedding/screed layer and M&L for colored non skid ceramic tiles 7to 8 mm thick, area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles at site.complete all as spd and directed. |
| 38 | Dismantling existing unservicable wall tile of any description including bedding/screed layer and M&L for 300x450 x7 mm thick glazed ceramic tiles colored as in dado/ skirting and vertical surfaces set&jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles.complete all as spd and direcetd. |
| 39 | Dismantling existing unservicable wall tile of any description including bedding/screed layer and M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) as in cooking plateforms, counter type WHB and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust admixture of pigment to match with shade of granite & moulding the edges complete all as specified and directed.Note:- the work should be executed in patch work. |
| 40 | Taking down eaves gutters and rains water pipes (any size or pattern), incl cleaning or refixing or removal to store |
| 41 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints in trenches bore of pipe 110 mm with PVC clamps and saddles including taking down existing (SGSW/PVC) pipe and fittings. |
| 42 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints trenches bore of pipe 75 mm with PVC clamps and saddles including taking down existing (SGSW/PVC) pipe and fittings. |
| 43 | PVC (SWR) pipes 110mm single socketed , in any length with rubber ring joints fixed to walls |
| 44 | PVC (SWR) pipes 75mm single socketed , in any length with rubber ring joints fixed to walls |
| 45 | S&F PVC (SWR) door bends of any radius bore of pipe 110 mm |
| 46 | S&F PVC (SWR) door bends of any radius bore of pipe 75 mm |
| 47 | S&F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm |
| 48 | S&F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm |
| 49 | S&F 110mm bore PVC (SWR) vent cowl |
| 50 | S&F 75mm bore PVC (SWR) vent cowl |
| 51 | PVC (SWR) branch piece (single Y) equal or unequal 110mm bore. |
| 52 | PVC (SWR) floor trap 75mm dia , plain with grating including jointing with solvent cement. |
| 53 | PVC (SWR) reducers 110mm bore. |
| 54 | Taking up or down steel tubing for 15mm dia pipe and connections including cleaning for re-fixing or removal to store.all as spd and directed by Engg-in-Charge |
| 55 | S&F repair 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with all fittings such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete .complete all as spd and directed by engr-in-charge. |
| 56 | Taking up or down steel tubing for 20mm dia pipe and connections including cleaning for re-fixing or removal to store.all as spd and directed by Engg-in-Charge |
| 57 | S&F repair 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with all fittings such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete .complete all as spd and directed by engr-in-charge. |
| 58 | S&F in repair CP grating 125mm dia as suitable to existing trap as per requirement all as spd and directed by Engg-in-Charge |
| 59 | M&L post construction Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron . all as spd and directed by Engg-in-Charge Depth of the hole to be measured for payment purpose. |
| 60 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre & S&F for Hangers 6 mm dia GI ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long drawing all as spd and directed by Engg-in-Charge complete allas specified.Note: 1-All the arrangements scaffolding, saftey harness etc will be made by contractore free of cast & department will have no role in this Arrangements but work execute as per direction by Engr-in Charge and Approved by GE. And the work will be done proper manner & height of floor is upto to 15Mtr.2. Sample approval has to be taken before starting the work and matrials has to be kept in store. |
| 61 | S&F Hollow PVC Wall Lining consisting of 5 to 6 mm thick colour/ printed PVC sheet including fillets ,fittings and fixture with all accessories etc as per approved design as.complete all as spd and directed by engr-in-charge |
| 62 | Supply and fixing Hollow PVC Ceiling Lining consisting of 5 to 6 mm thick colour/ printed PVC sheet including fillets,GI frame work,fittings and fixture with all accessories as per approved design,drawing.complete all as spd and directed by Engr-in-charge. |
| 63 | Taking down chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and direcetd by Engr-in-Charge. Notes :-Including making good to disturbed surface with brick work, plaster, matching finishes to receive new frame or chowkhats and no extra cost will be paid to contractor against same. |
| 64 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 65 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 66 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening including EPDM rubber, all complete as per requirement and direction of Engineer-in- charge. |
| 67 | S&F PVC roller not exceeding 40mm dia fixed to aluminium sliding window shutter with necessary clip or screw etc complete all as specified and direcetd by Engr-in-Charge. |
| 68 | S&F in repair 5.5mm thick, ordinary quality and glazing with rouber beading, joining cleat etc in squar n exc 0.5 sq. m in each pane complete all as specified and direcetd by Engr-in-Charge. |
| 69 | S&F in repair 5.5mm thick, ordinary quality and glazing with rouber beading, joining cleat etc in square exc 0.5 sq. m in each pane complete all as specified and as directed by Engr-in-charge. |
| 70 | SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender