Tender For Addition Alteration / To Waiting Rooms Ldrc And Emergency Room At Afcme At Camero Complex
Tender Value
43.59 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
17 days left
EMD
87180
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration / To Waiting Rooms Ldrc And Emergency Room At Afcme At Camero Complex
BOQ
| Sl. No. | Item Description |
| 1 | Taking down frame or chowakhats (w/o taking off shutter from the frame ) of any description exc. 1.50 sqm and not exc. 4.00 sqm each complete all as specified and directed. |
| 2 | Dismantling of aluminium partition including all necessary fittings complete all as specified and directed. |
| 3 | S & F for aluminium power coated frame work any colour (minimum thickness of power coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed. |
| 4 | S & F for aluminum powder coated any colour (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified. |
| 5 | S & F aluminium deco grills conforming to DG-104 grade complete all as specified and directed by Engineer-in-Charge. |
| 6 | S & F for aluminum powder coated any colour (minimum thickness of powder coating 50 micron) as in door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed. |
| 7 | S & F 5.5mm thick selected quality tined glass and glazing in square exc 0.50 sqm each fixed with PVC/neoprene gasket in aluminium frame work complete all as specified and directed by Engineer-in-Charge. |
| 8 | S&F brass body mortice lock vertical type size 100mm 4 lever, including escutcheon plate and two Nos keys fixed complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for providing and fixing factory made uPVC white colour casement (Openable) door made of extruded profile with wall thickness of 2.3mm (+/- 0.2mm). Window profile with hollow section with multi chamber, frame (60mmx58mm), sash (60mmx78mm). T profile (One vertical length in between two shutters) (60mmx71mm) Glazing bead corners, including drilling of holes for fixing hardware and drianage of water etc. making arrangement for fixing of hardware EPDM gasket + -0.2 mm thick galvanised steel frame (28mmx21.5mm) sash (31mmx27mm) 'T' profile (27mmx17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fastners. Hardware : [ casement door handle made of zinc alloyed (while powder coated) Corner strikers: Cyilnder. Door transmission gear made of mild steel with multi point locking system with strikes, 3D hinges of zinc alloyed (white powder coated)] and 5mm thick glazing with selected quality glass, Complete all as specified and directed by Engr-in-Charge. (Note : The unit rate quoated by contractor excludes cost of glass and includes all other connected accessories. Net opening will be meausered for payment purpose). |
| 10 | M&L for providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. Complete all as specified and directed by Engr-in-Charge (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) Area exceeding 2.00 sqm each. |
| 11 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 andresistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 12 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900N (Edge),minimumcompressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 13 | S&F aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed. |
| 14 | Supply and fixed butt hinges 100 mm medium weight cold rolled mild steel, complete all as specified and directed. |
| 15 | S&F aluminium anodised barrel tower bolts extruded section of size 200 mm, complete all as specified and directed. |
| 16 | S&F aluminium handle extruded febricate type anodised of size 150 mm complete all as specified and directed. |
| 17 | Taking down cement or cement lime plaster on brick walls incl racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by Engr-In-Charge. |
| 18 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick surfaces or concrete surfaces even and smooth without using extra cement complete all as specified and as directed by Engr-In-Charge. |
| 19 | M&L for rendering 15 mm thickCM (1:6) on fair faces of brick work or concrete surfaces surface even and fair without using extra cement complete all as specified and as directed by Engr-In-Charge. |
| 20 | M&L for applying two coats of exterior acrylic emulsion paint premium quality (Appex paint) including one coat of primer and 3 coats of wall care putty to achieve smooth surface complete on walls/ ceiling upto 4 story bldg complete all as specified and directed by Engr-In-Charge. |
| 21 | M&L for preparation of newly plastered or unplastered surface and applying two coats of distemper oil emulsion on walls over a coat of primer incl 3mm thick wall care putty on walls complete all as specified and directed by Engr-In-Charge. |
| 22 | Dismantling stone slab and granite of any description or thickness in floors etc and removing the debries outside the MOD land complete all as specified and directed by Engineer-in-Charge. |
| 23 | M&L for 20 mm thick granite stone (any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment (1:2) to match the shade of stone including cutting and polishing as in floors laid over 15mm thick screed bed in cement mortar 1:6 complete.on cooking / working platform, complete all as specified and directed. |
| 24 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 25 | M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7 mm thick , set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick cement plaster in cm (1:4) complete all as specified and directed. |
| 26 | M&L Vitrified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with coloured cement matching with surfaces of tiles as in floor 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and directed. |
| 27 | M&L for Non skid ceramic coloured joint free tiles 7to 8mm thick (square/ rectangular), area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15 mm thick in cement mortar (1:6) laying floor finish complete all as specified and directed. |
| 28 | Dismantling of ceiling/ wall panelling including frame work and board complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L for providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles , design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 tiles fully mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. |
| 30 | M&L for preparation of old plastered surfaces of walls by washing, rubbing down and stopping of distemper and painted surfaces & applying two coats of distemper oil emulsion over a thin layer of wall care putty complete all as specified and directed. |
| 31 | Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 32 | Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender