Tender For Providing Of 100 X Solar Street Lights With Poles Along Main Road Of Sharifabad Military Stn Under Age (I) Cif (K)
Tender Value
1.02 Crore
Estimated cost
Bid Submission
08 Aug 2026
27 days left
EMD
1.77 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of 100 X Solar Street Lights With Poles Along Main Road Of Sharifabad Military Stn Under Age (I) Cif (K)
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed. |
| 2 | M&L cement concrete Type C-2, 1:3:6, (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed. |
| 3 | Supply/Erection/Installation/Testing and Commissioning of 07 Mtr hot dip galvanized octagonal/polygonal shape pole suitable for wind speed 180 km/hr as per IS 875 with its accessories. Technical Specification:- Bottom 130 mm dia,Top-70 mm dia Thickness-3mm, Baseplate (220x220x12) mm, Foundation bolt size 30 mm dia,Bolt length 700 mm, No. of hole 04 Nos, foundation bolt- 04 Nos, PCD- 220 mm, Projected bolt- 100 mm & Anchor plate thickness- 3 mm complete all as specified and directed. |
| 4 | Supply, Installation, testing and commissioning of maximum 60W All-In-One LED Solar Street lights 150 WP Hybrid on street lighting Tubular poles made up of Aluminium Extrusion housing/ Pressure Die cast housing with minimum 150Wp Mono crystalline Panel fixed on the top side of luminaire housing (Battery, charge controller and LED module should be integrated inside Luminaire). Maintenance free 12.8V/60Ah LiFePo4 battery along with BMS (BIS certification required) with minimum cycle life of 2000 cycles, MPPT Charge controller with Efficiency > 93%. Luminaire should have an Intelligent Pre- Programmed dimming profile suitable to provide 2 days backup. Luminaire should have IP65 & IK08 and have lumen output of greater than 9500 lumens at full power (System Efficacy > 160 Lumens/watt) as LM79 from NABL accredited Lab. The LED chip used should be with lenses for effective light distribution. Solar Panel, MPPT charge controller and luminaires should be manufactured in India only. The solar lighting company must have in house NABL accredited lab to justify luminaire system efficacy. The light fixture must be manufactured in house (OEM owned facility) by OEM. Luminaire must have Green & Red indicator lights for showing charging of battery and low battery voltage respectively. Light fixture must also have protections like Over-Charge protection, Deep-discharge protection, current protection, Short circuit protection, Over voltage protection. The light fixture should have a hybrid controller to support working of light fixture by electric supply in case of adverse weather conditions/ low battery. The job further includes replacement warranty of fixtures (if damaged/burnt out whatso ever reason) for a period of 2 years reckoned from date of successful commissioning/handing over of site to intending department. The solar lighting companies must have toll free base service network to provide immediate after sales service networks available in different districts of the state. Certificates to be submitted - LM79 (NABL accredited Laboratory), LM80, BIS certificate of Battery and BIS certificate of Solar Panel, IK08 and IP65 certificate complete all as specified and directed. |
| 5 | Supply, laying, jointing and testing cable XLPE insulated,screened, PVC beded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed. |
| 6 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep in any type of soil and getting out for laying of cable etc of any size complete all as specified and directed. |
| 7 | Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cm complete all as specified and directed. |
| 8 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 9 | M&L sub class 'B' brick, old size, as in coverings, protection to the eletric cable, laid dry, flat, transversally along the length of cable on sand cushioning with width equal to length of brick, complete all as specified and directed. |
| 10 | S&L dry river sand laid in trenches 8 cm below the cable & 15 cm above the cable in trenches as cable cushioning and covering complete all as specified and directed. Note : Punned thickness shall be measured for payment purpose. |
| 11 | M&L Road cutting for cable crossing and cutting not wide 45X Depth 60 meter with skilled labour/T&P including GI protection pipe 50 mm dia, returning filling and remitting to same as per existing surface complete all as specified and directed. |
| 12 | Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level, connecting to the Galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and earth lead protected by provision of GI medium grade pipe 40mm bore including provision of concrete pit in PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x3mm with lugs-02 Nos and with 6mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at bottom 1.50M long placed on top edge of earth plate, common salt and charcoal filling, test point with fixing arrangements, funnel, wire mesh and earth work in any type of soil, returning, filling in and removal of surplus soil to a distance not exceeding 50M, all as per electrical plate No 3 of SSR-2009 Part-I and connecting to earth test point complete all as specified and directed including testing on completion. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender