Tender For Comprehensive Maintenance To Md Accn Prc, Src, Mh, Asc, Mes At Ge Ramgarh Cantt
Tender Value
20 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
17 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramgarh → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance To Md Accn Prc, Src, Mh, Asc, Mes At Ge Ramgarh Cantt
BOQ
| Sl. No. | Item Description |
| 1 | M&L Brushing neat cement slurry (3 Kg of cement per Sq M) mixed with water proofing liquid in the proportion,water proofing liquid, water & cement (1:4:7) or as per manufacture instructions for bonding of old concrete surface to new concrete complete all as specified & directed . |
| 2 | M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) mixed with integral waterproofing chemical compound mixed in proportion 200 millilitre per 50 Kg cement as in padding, benching,Sunken portion etc on roof surface for corecting/making proper slope on roof, etc complete all as specified & directed. |
| 3 | M&L Rendering 10 mm thick in cement mortar 1:4 on concrete / brick surfaces with liquid water proofing compound @ 200 ml/50 kg per bag of cement or as per manufacturar instruction over roof / sunken slab /wall complete all as specified and directed NOTE : water proofing liquid will be measured and paid seperately . |
| 4 | Supply only liquid water proffing compound complete all as specified & directed |
| 5 | Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm in sunken portion including cleaning of surfaces complete all as specified & directed |
| 6 | M&L 50 micron thick Polythene film laid on a coat of bitumen primer @ 0.3 to 0.5 kg per sq min sunken floor etc complete all as specified & directed |
| 7 | S&F 50mm bore tubes light grade galvanised with all fittings laid in floor as in spout pipe, etc complete all as specified & directed |
| 8 | Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) etc including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed |
| 9 | Taking down chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed |
| 10 | S&F for 1.25 mm thick pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel door complete all as specified and directed.Note: The quoted unit rate under this item shall deemed to be included (i) one shop coat of primer (ii) a coat of bitumen paint of inner side of pressed steel door frame before filling of PCC. |
| 11 | S&F for 1.25 mm thick pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel door complete all as specified and directed.Note: The quoted unit rate under this item shall deemed to be included (i) one shop coat of primer (ii) a coat of bitumen paint of inner side of pressed steel door frame before filling of PCC. |
| 12 | S & F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides , supplied and fitted to chowkats complete all as specified and directed . . |
| 13 | S & F 35 mm thick, factory made, 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any number size of members), beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); kiln seasoned & chemically pressure treated etc complete all as specified and directed . (Note:- (i)Glass / wire cloth shall be measured & paid separately. |
| 14 | M&L for framed work such as grills,gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe 290- Gde E -165 & for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc.complete all as specified and as directed |
| 15 | S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing complete all as specified & directed |
| 16 | S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing incl 3 Nos but hings 100 mm long for each door complete all as specified & directed |
| 17 | S&F in repair 18/19mm thick pre-laminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for cupboard shutter, shelf, etc complete all as specified & directed. |
| 18 | S&Fin repair for 18 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work and kitchen cabinet etc complete all as specified and directed |
| 19 | S&F Thick door cabinet hinge - Regular-full Overlay SS bright finish fixed in modular kitchen complete all as specified and directed. |
| 20 | S&F Extruded brass handles, fabricated type polished 150 mm in size and fixed complete all as specified and directed |
| 21 | S&F door magnet for kitchen cabinet omplete all as specified and directed. |
| 22 | S&F mild steel cupboard shutter with frame, Godrage pattern, made out 22 guage mild steel sheet including chromium plated MS handle with proper locking arragements ( brass mortice lock, vertical type, size 65mm, 4 livers with escutcheon plates & two keys ) with and including two coats of spray painting with synthetic enamel of approved tint over a coat of red oxide primer including fixing with 6 Nos 12mm dia bolts 150mm long grouted in brick wall/ concrete including making good the disturbed surface as original complete all as specified and directed by Engr-in-Charge. |
| 23 | S&F 30mm continues piano hinges mild steel bright finish or elec-trogalvanised complete all as specified and directed. |
| 24 | S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel with brass polish , bright finish complete all as specified and directed |
| 25 | S&F Ball catcher with 8mm dia steel ball and brass body and striking plate incl letting and fixed complete all as specified and directed |
| 26 | S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple complete all as specified and directed by Engr- In- Charge. |
| 27 | M & L for 3 mm thick plain sheet glass ordinary quality exc 0.50 Sqm in each pane complete all as specified & directed |
| 28 | All as per above item no 27 here in before but .exe 0.5 sqm in each 3mm figured glass complete all as specified & directed |
| 29 | S&F Hasp and staple safety type aluminium anodized hinges pin incl bolt to hinges plate 125 mm long complete all as specified & directed |
| 30 | S&F Anodised aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, window and ventilator shutters , fixed / sliding track two or three track including frames ,glazing clips , cleats side hung type without sash bars, fixed window, ventilators etc with one or more rebates including joining cleat for fixing etc. complete all as specified & directed . |
| 31 | S&F Anodised aluminium window and ventilator shutters powder coated (minimum thickness of powder coating 50 micron) sliding , side haunge type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such locking arrangement complete all as specified & directed |
| 32 | S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified & directed |
| 33 | S & F Aluminium anodised barrel tower bolts of extruded section and fixed 125 mm long complete all as specified & directed |
| 34 | S & F Aluminium anodised handles of extruded section and fixed 150 mm long complete all as specified & directed |
| 35 | S&F aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alumionium alloy and fixed 250mm long. complete all as specified & directed |
| 36 | S&F in 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and direcetd |
| 37 | S&F 150mm long overall length of cover plate floor door stopper of aluminium alloy body anf tongue anodised with hard drawn steel spring fixed in floor complete all as specified and directed |
| 38 | M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete all as specified & directed |
| 39 | S & F in repair Harrison rails, mild steel, chromium plated with fixing in bracket etc complete all as specified & directed by Engr-In- Charge |
| 40 | S & F brass CP bracket fancy type suitable for fixing to 20mm dia curtain rod complete all as specified & directed by Engr-In- Charge |
| 41 | Dismantling old brocken floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premices complete all as specified and directed. |
| 42 | M&L Granite (of any type) work (table rubbed and polished) of any shade 18 to 20mm thick in cooking platform, steps, windowcills, etc over and incl 15mm thick cement screed base in CM 1:4 laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab incl rounding of slab & demolition of old slab complete all as specified & directed. |
| 43 | M&L coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement complete all as specified & directed |
| 44 | M&L for non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified & directed |
| 45 | M&L Vitrified ceramic tiles Dark shade 8-9 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed In white or coloured cement to match the shade of tiles, laid over and including 15mm thick cement screed base in CM (1:4), complete all as specified & directed |
| 46 | All as per Item No 45 here in before but as in Skirting with 10mm thick rendering in CM 1:4 |
| 47 | Demolition of cement concrete unreinforced as in ground floors and pavings n exc 15 cm thickness (below or above ground level complete all as specified and directed. |
| 48 | M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3 complete all as specified and directed. |
| 49 | M&L Cement concrete 1:2:4, type B-1 (using 12.5 mm graded stone aggregate) as in levelling course, coping etc complete all as specified and directed. |
| 50 | M/L for PCC (1:5:10) type E2 using 40mm graded brick aggregate as in sunken portion, sub base,etc ccomplete all as specified and directed at site. |
| 51 | Demolition of cement concrete reinforced as in chullah hoods , shelves and plate form etc complete all as specified and directed |
| 52 | M&L for RCC as in kitchen platform, shelves type B0 1:2:4 (12.5 mm graded aggregate) including necessary form work complete all as specified and directed.. |
| 53 | M & L for mild steel TMT bars 8 to10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 54 | M&L machine cut cudappah stone slab 20-25 mm thick over 15 mm thick cement screed base in CM 1:4 laid & jointed with gray cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 55 | M&L rounding of edges of kota/cudappa stone slabs one edge , such as in steps, cooking plateform, and other similar situation complete all as specified and directed. |
| 56 | Taking up or down steel tubing and connections of 15 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed. |
| 57 | All as item No 56 here in before but for 20 mm dia bore pipe |
| 58 | All as item No 56 here in before but for 25 mm dia bore pipe |
| 59 | S&F steel tubing for 15 mm bore and connection tubing in new or old position to walls, ceiling, floors etc including all fitting as socket, elbow, nipple,union etc for hot and cold water complete all as specified and directed |
| 60 | All as item No 59 here in before but for 20 mm dia |
| 61 | All as item No 59 here in before but for 25 mm dia |
| 62 | Refixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)including all fitting as socket, elbow, nipple,union etc complete all as specified and directed .Note :G I Pipe obtained from item No.56 here-in -before. |
| 63 | Refixing for 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)including all fitting as socket, elbow, nipple,union etc complete all as specified and directed .Note :G I Pipe obtained from item No.57 here-in -before. |
| 64 | Refixing for 25 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)including all fitting as socket, elbow, nipple,union etc complete all as specified and directed .Note :G I Pipe obtained from item No.58 here-in -before. |
| 65 | S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed . |
| 66 | S&F in repair vitrious china wash basin pedestal, white flat back size 550 x 400 mm including waste, chain & plug and poreclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waste pipe fitted complete all as specified and directed |
| 67 | S&F vitreous china squatting pan ORRISA Pattern of size 580x 440mm white with integral foot rest complete (excluding cistern and flush pipe) with provn of lime concrete including backing joints complete all as specified and directed at site. |
| 68 | S&F in repair for 10 ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed. |
| 69 | S & F in repair for PVC connection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as specified and directed. |
| 70 | S&F in repair 15mm dia angle stop valves cast copper alloy faney type,chromium plated complete all as specified and directed |
| 71 | S & F in repair, 15mm bore stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed) screwed down,high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed. |
| 72 | S & F in repair, 15mm bore bib taps cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed |
| 73 | S&F in repairs15mm dia pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered \\"Hot or Cold\\" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed |
| 74 | S&F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed . |
| 75 | S&F in repair for Gun-metal, globe or gate valves 25mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed . |
| 76 | S&F in repairs for shower rose chromium plated with or without swivel joints 125 mm dia complete all as specified and directed |
| 77 | Supply and fix shelf 450mm long of PTMT fixed with and incl chromium plated brass screws and wooden /plastic cleats (minimum weight 300 grams) complete all as specified and directed . |
| 78 | S&F in repair stainless steel kitchen sink with drainage board 1 mm thick including bedding in cement mortor on to dwarf wall or including fixing centilever brackets over all size 915 mm x 460mm baw/size 410 mm x 330 mm x 160 m and including 38/40mm dia waiste pipe complete all as specified and directed |
| 79 | S&F stainless steel uternsil rack of size 24\\" X 36\\" X10\\" of approved quility and fixed in kitchen as directed by Engr-in-Charge. |
| 80 | S&F CP towel rail, 20mm dia, D type,60cm long complete all as approved and directed by the EIC |
| 81 | M &L 600x450mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden ply with chromium plated brass screws and cup washers complete all as specified and directed . |
| 82 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings,heads,shoes,bends,swan-necks,etc including removing from site complete all as specified and directed . |
| 83 | M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed. |
| 84 | M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed. |
| 85 | S&F PVC (SWR) bends 110 mm bore of any radius complete all as specified and directed . |
| 86 | S&F PVC (SWR) bends 75 mm bore of any radius complete all as specified and directed . |
| 87 | S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door complete all as specified and directed . |
| 88 | S&F PVC (SWR) junction single (singleT) equal or unequal 75mm bore provided with access door complete all as specified and directed . |
| 89 | S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed . |
| 90 | S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement complete all as specified and directed . |
| 91 | S&F 110mm dia PVC (SWR)WC connector with lip ring complete all as specified and directed . |
| 92 | Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 93 | Demolition of brick work built in cement mortar complete all as specified and directed . |
| 94 | M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6 complete all as specified and directed . |
| 95 | M&L rendering 15mm thick on fair faces of brick or concrete surfaces and finishing the surfaces fair and even without using extra cement in CM (1:4) complete all as specified and directed . |
| 96 | M & L for rendering 10 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and fair without using extra cement complete all as specified and directed . |
| 97 | M&L for 5 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as specified and directed. |
| 98 | M&L for repair and rendering 10mm thick in cm 1:3 on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs complete all as specified and directed. |
| 99 | M&L applying two coat of synthetic enamelled paint over one coat of pink primer on new wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of new surface all as specified and directed |
| 100 | M&L for applying one coat of synthetic enameled paint on old painted wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surface complete all as specified and directed . |
| 101 | M&L for preparing the newly surface of any description not otherwise described over 10 cm width or girth on steel surface and applying two coats of synthetic enamel paint over one coat of zinc chromate primer all as specified and directed |
| 102 | M&L for applying Two coats of cement based paint and including preparation of new plastered surfaces after priming coat of exterior alkali resistant primer complete all as specified and directed .. |
| 103 | M&L for complete removal of existing treatment of walls and applying Two or more coats of cement based paint and applying priming coat of exterior alkali resistant primer complete all as specified. |
| 104 | M & L for applying two coats of distemper on newly plastered surfaces of ceilings after necessary preparation of the surface, complete all as specified and directed. |
| 105 | M&L for Preparation of old plastered or unplastered surfaces of ceiling and applying one coat of distemper to ceiling complete all as specified and directed |
| 106 | Material & Labour for applying two coat of oil emulsion distemper on newly plastered surfaces of wall over a coat of primer over 1mm wall care putty including perparation complete all as specified and directed . |
| 107 | Material & Labour for applying two coat of oil emulsion distemper on old surfaces of wall over a coat of primer over 1mm thick wall care putty including complete removal of distempered and painted surfaces complete all as specified and directed . |
| 108 | S & F in repair, 15mm bore Brass central hole basin mixer for mixing hot and cold water cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 109 | S & F in repair, 15mm bore Brass sink mixer with regular spout W/M for mixing hot and cold water cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 110 | Supply and fix in repair Two way angle cock with flange of 15mm bore, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed. |
| 111 | M&L SS grating doom 102mm(4\\") dia including jointing with solvent cement complete all as specified and directed. |
| 112 | S & F in repair, 15mm bore Brass wall mixer for mixing hot and cold water cast copper alloy, chromium plated with crutch or butterfly handle with swan neck, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed |
| 113 | S&F steel windows with side hung shutters incl box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed . |
| 114 | All as per item No 113 here in before but without glazing bars complete all as specified and directed . |
| 115 | Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as specified and directed . |
| 116 | S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed . |
| 117 | S & F 3 mm thick frosted glass pin head type and glazing with oil putty in squares exc 0.5 Sqm in each pane etc complete all as specified and directed . |
| 118 | S&F in repair stailness steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as specified and directed .. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender