Tender For Special Repair To Bldg No P-157 Under Age B/R-I Of Gesaugor
Tender Value
48.53 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
15 days left
EMD
97100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-157 Under Age B/R-I Of Gesaugor
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Dismantling floor, hearth or wall tiling, including cement mortar bedding (but notbacking), any description including removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | M&L for PCC (1:2:4) type B-0 (using12.50mm graded stone aggregate) as in levelling course to sub base, finished surface rough to receive the tiles complete all as specified and directed.Note : Average thickness exc 25mm thick but n'exc 40mm |
| 3 | M&L for Non skid fully vitrified ceramic coloured stone finish tiles in floors etc, 10mm thick, area of each tiles exc 0.42 sqm but n'exc 1.20 sqm (square/ rectangular) tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour/shade over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed.Note : Colour, size and patteren shall be decided and approved by GE |
| 4 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 5 | M&L for Brick work with sub- class ‘B’ old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed |
| 6 | M&L for rendering cement plaster, 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6, finishing surfaces even and smooth without using extra cement complete all as specified and directed |
| 7 | M&L for rendering cement plaster, 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:4, finishing surfaces even and smooth without using extra cement complete all as specified and directed |
| 8 | M&L for two coats of cement base wall care putty in two coats @ 1Kg/Sqm (0.5Kg in each coat) on new plastered surface of wall/ceiling as preparatory work to painting including cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and made ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 9 | M&L for complete removal of existing treatment and applying two coats of cement base wall care putty (approx. thickness 1mm) on newly plastered surface of wall/ceiling as preparatory work to painting including brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 10 | M&L for two coat of acrylic interior emulsion paint over and including one coat of interior primer on prepared surfaces of wall/ceiling complete all as specified and directedMake : Asian (Apcolite)/ Berger(self breath easy)/ Nerolac(nerolac Impression HD)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 11 | M&L for two coats of acrylic exterior weather proof paint over and including one coat of exterior primer on prepared surfaces of wall complete all as specified and directed.Make : Asian (Appex Altima)/ Berger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 12 | S&F roof trusses ( framed), trussed, purlin, crane gantries, rails and fastenings and heavy bracket framing (beams, tee, angle, channel or flat sections) including distance pieces, cleats etc (welded/riveting) conforming to Fe 410-W (Gde-E250) quality 'A' complete all as specified and directed. |
| 13 | S&F mild steel rolled/hollow tube section as in post, main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 (Gde E-165) complete all as specified and directed. |
| 14 | M&L for fabricating, assembling and erection of Tensile Mesh Membrane with Multi-composed PVDF-lacquer system on both sides, wieldable without grinding, HT polyster yarns 2200 Dtex, minimum weight should be 1050g/sqm (EN ISO 2286-2), minimum tensile strength should be 6000 N/5Cm in warp and 5500 N/5Cm in weft directions (EN ISO 1421), minium Tear strength should be 1800 N in warp and 1800 N in weft (DIN 53363). Flame Retradency DIN 4102: B1, quality in conformity with ISO 9001 with minimum 10 years' warranty from the manufacturer. over steel frames with all fittings and fistures such as Galvanized MS Membrane / End Plate, Shackles, Rigging Screws, Turnbuckles, swedge, fork, keder rods & galvanized MS strands / cables with stainless steel end terminals complete as per Drawing/ Detail & as per specifications and as per the instructions of Engineer-in-Charge. (Rate includes cost of fabric shop drawings, forming, cutting, fabrication, hot weld stich of fabric, Transport to the site, assembling and installation with GI cables, harware, Aluminum flat, EPDM gasket and required accessories whereever required complete including lifts upto all heights tools and plant, and necessary scalffolding etc. required for all operations in all respect. Supporting steel frame shall be paid separately under structural steel item. (Note: Actual surface area of fabric shall only be measured for payment.) |
| 15 | Excavating in post holes (or similar holes) in any kind of soil, each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed. |
| 16 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 17 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar complete all as specified and directed. |
| 18 | M&L for 16 to 18mm thick Granite slab of any shade (table rubbed and polished), machine cut for floors / shelves in steps, jambs, pillars, window cills & cooking platforms laid over and including 15 mm thick cement mortar 1:4 bedding, pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs, complete all as specified and directed |
| 19 | S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 20 | S&F 12 mm thick toughened glass as in door (shutter ) with hydraulic floor spring and top pivot sufficient to operate for the glass doors with weight of 120-150 Kg incl cutting to shape, drilling holes required including figured/ frosted glass film of required pattern/ logo/ shape on one side, all required accessoriesi.e, SS Handle 600mm Long of required design and shape, handle, locking arrangment etc as approved by engr-in-Charge complete all as specified and directed. |
| 21 | S&F 12 mm thick toughened glass as in window, cutting to shape, drilling holes required including figured/ frosted glass film of required pattern/ logo/ shape on one side, fixed on Aluminium / WPC Frame (As per site requirement), all required accessoriesi.e rubber beading, silicon, SS Handle 600mm Long of required design and shape etc as approved by engr-in-Charge complete all as specified and directed. |
| 22 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description, over 10cm width or girth including preparation of new steel surfaces complete all as specified and directed. |
| 23 | M&L for providing 3 layers of waterproofing coat inside of pool including cleaning of surface from dust, durt etc complete all as specified and directed. Make Dr Fixit. |
| 24 | M&L for mosaic tiles 20mm x 20mm x 3mm thick heat resistance, crazing resisitance, washable, acid reisitance, non fading of colour and fungi resistance of any colour of floor / wall in pool with and incl MYK laticrete adheshive and Epoxy grouting including 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surface of wall / floor finished even and smooth complete all as specified and directed. |
| 25 | M&L for stainless steel (Grade 304) work using hollow tubes, channels, plates etc., as in ladder (any size) and similar work and fixed in position with required fixing accessories of appropriate size like stainless steel dash fasteners, stainless steel bolts etc. including welding, grinding, buffing, polishing and making curvature (where ever required) complete all as specified and directed.Note : The pattern, type and size shall be varried as per requirment and as directed by Engineer-in-charge/GE. |
| 26 | Taking down carefully copper/aluminum point wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed. |
| 27 | Taking down main switch, DB/Change over/VTPN, MCCB AC box of any capacity |
| 28 | M&L for concealed point wiring for one light point or fan/exhaust point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor (stranded) 1100 volt wiring cable in & including ISI marked PVC conduit of size not less than 20mm, ivory/white in colour with all accessories (such as tee, bend, joint cover etc) including suitable size modular metal boxes with cover plate along with frame for mounting of switches/sockets/ regulator etc and continuous earth lead cable wire of similar description of wiring cable complete all as specified and directed.Note:-(i) Wiring cable shall be provided using colour coding such as Phase - Red, Neutral – Black, and Earth – Green or as approved by Engr-in-charge .(ii) Cutting, chasing in walls (brick or stone) shall be measured and paid separately under respective item here-in-before. |
| 29 | All as per item No. 28 above but point wiring for one 5 Amp independent socket point controlled by one switch |
| 30 | All as per item No. 28 above but point wiring for one 3 pin ,5 Amp socket point on the same board with other switch and 2.5sqmm wiring cable. |
| 31 | All as per item No. 28 above but point wiring for 15/16A socket outlet with 2.5 Sqmm wiring cable. |
| 32 | S&F Modular switch, one way, 5/6 Amp 230, 1 module complete all as specified and directed. |
| 33 | S&F Modular socket outlet, 5/6 Amp-2/3 pin combined, 2 module complete all as specified and directed. |
| 34 | S&F switch Modular, single pole, one way,15/16 Amp ,1 module 230 Volt complete all as specified and directed. |
| 35 | S&F socket outlet modular 15/16 Amp, 5/6 pin combined ,2 module 230 Volt complete all as specified and directed. |
| 36 | S&F ceiling rose, surface backlite,three terminal complete all as specified and directed. |
| 37 | S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. |
| 38 | S&F modular fan step regulator 60/80W, 2 modules complete all as specified and directed. |
| 39 | S&F Tube light fitting 20/18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directedMake : Havells - Cat no LHEXAPP7PN1W020/ Bajaj - Beam Pro Batten 830412 / Philips -Ujjwal/ slim line Batten 919515814053 / Orient - LBLN -18-C-SQ |
| 40 | \\"S&F box type LED optic fitting 10/9 Watt 2 feet box type complete all as specified and directed.Make : Havells - Cat Part No LHEXBLP7IN1W009 or eqvt in bajaj cat part No BCLSB10WH/ CG Cat Part No LCTL-9-CDL\\" |
| 41 | S & F LED light fitting 1x9W/1X10W bulkhead luminaries including LED light driver, holder & connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make : Havells - cat No RUGBYGENXFTS10WLED865SSYMBOPC / Bajaj - BIBWP10WLED / Orient - LIBHP-10-C |
| 42 | S&F LED bulb 9/10 watt suitable for angle / batten holder fitting complete all as specified and directed.Make\\" Havells/ Philips/Bajaj |
| 43 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades and deposited to MES store complete all as directed by Engr-in-charge. |
| 44 | S&F ceiling fans with brushless direct current motor (BLDC),1200 mm sweep, 230 V, 5 star rated, having minimum air delivery 210 CFM with service value 6.00 BEE alongwith remote control, canopy, down road (not les than 250mm), hanging clip, rubber real, nut bold and washer, locking pin, connecting cable etc) complete all as specified and directed.Make : Havells Modle-Festiva Prime BLDC / Crompton: Model-Energion Groove Regulator/ / equivalent in Bajaj / Philips |
| 45 | S&Fexhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250MM complete all as specified and directed.Make : Havells Model -Thrill Air DX HS / Crompton: model- BRISK AIR NEO / equivalent in Bajaj / Philips |
| 46 | M&L concealed sub main wiring with two single core 6.0 Sqmm PVC FRLSH insulated unsheathed stranded copper cable (Phase & nutral) and one single core cable of same description as continuous earth wire, drawn in & incl medium grade, ISI marked PVC conduit of suitable size (not less than 20mm dia) with all accessories (such as tee, bend, joint cover, round / square blocks at junctions as required) complete all as specified and directed.Note: (i) The cost of cutting charging pinning for concealed PVC conduit, making good in CM 1:3 and painting so as to match with the adjoining existing surface finish shall be measured and paid separately under respective item of BOQ in this contract)(ii) Proper colour coding of wiring cables (as approved by Engg-in-charge) shall be used/ ensured(iii) Two runs of single core cable (Phase and neutral) and and one run of single core cable (earth continuity conductor) & one run of PVC casing -n-capping/pvc conduit shall be measured as one unit length. |
| 47 | S&F MCB SP 240 volt 6 Amp to 32 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 48 | S&F MCB SP 240 volt 40 Amp to 63Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 49 | S&F MCB SPN 240 volt 32 Amp to 40Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 50 | S&F sheet metal enclosure distribution board (DB) double door, IP-43, SPN, 8 way, 240 V with 120-160 Amps rated bus bar of suitable size, including taking down existing DB with MCB and bus bars complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 51 | S&F sheet metal enclosure distribution board (DB) double door, IP-43, SPN, 8 way, 240 V with 120-160 Amps rated bus bar of suitable size, including taking down existing DB with MCB and bus bars complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender