Tender For Proposed Construction Of Godown And Rice Mill Shed For Abrapali Mahila Producer Company, At- Salekasa, Tah- Salekasa, Dist-Gondia
Tender Value
25 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
10 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gondia → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Construction Of Godown And Rice Mill Shed For Abrapali Mahila Producer Company, At- Salekasa, Tah- Salekasa, Dist-Gondia
BOQ
| Sl. No. | Item Description |
| 1 | PROPOSED CONSTRUCTION OF GODOWN AND RICE MILL SHED FOR ABRAPALI MAHILA PRODUCER COMPANY, At- SALEKASA, TAh- SALEKASA, DIST-GONDIA |
| 2 | Excavation for foundation in earth, soil of all types, sand gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering preparing the bed for the foundation and necessary back filing, ramming, watering including shoring and strutting etc complete (Lift upto 1.5 m) |
| 3 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming. watering etc. complete |
| 4 | Filing in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc complete |
| 5 | Providing preconstructional anti-termite treatment as per I.S.6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per One Square Metre of surface area covering ten years guarantee on bond paper. |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc complete. With natural sand/V SI quality Artificial Sand |
| 7 | Providing and laying in situ/Ready Mix cement concrete M 20 of trap/graniite /quartzile gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc including balling out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V S. I quality Artificial Sand |
| 8 | Providing and laying Castin nitu/Reaily Mix cement concrete M-20 of trap/ granite /quartzite gneissmetul for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying pumping compaction finishing the formed surfaces. with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface ar roughening if special finish is to be provided and curing ete complete (Espluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete 8atch mix plant (Pan mixer) etc complete. With natural sand/V.SI quality Artificial Sand |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite /quartzite/ gneiss matal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and cuning etc. complete (Excluding reinforcement and structural steel) with tuby automatic micro processor based PLC with SCADA enabled reversible Drum Type micer/ concrete Batch mix plant (Pan moxer) etc complete With natural sand/V.SI. quality Artificial Sand |
| 10 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite / quartzite /gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting roughening them if special finish is to the provided, finishing uneven and honey combed surface and curing etc complete The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc (Wooden centaning will not be allowed) |
| 11 | Providing and foong in position TMT-FE-500 bar reinforcement of various diameters for RCC pile caps footings, foundations, stats, beams columns, canopies staircase newels chajjas, litels pardis, copings, fins, wiches Jete an per detailed designs, drawings and schedules including cutting bending, hooking the tiers, biriding with wires or tack welding and supporting as required complete |
| 12 | Providing second class Burnt Brick masonry with conventional/ S type bricks in cement mortar 1:6 in foundations and plinth of inner walls in plinth edernal walls including bailing out water manually, striking joints on unexposed faces, raking out joints an exposed faces and watering etc. Complete |
| 13 | Providing fly ash brick masonry with conventional /I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 14 | Providing internal cement plaster 12mm thick in single coat. cement mortar 1:5 without neeru finish to concrete or brick surtaces, in all positions including scaffolding and curing etc. |
| 15 | Providing internal cement plaster 20 mm thick in single coat. cement mortar 1:5 without neeru finish to concrete or brick surtaces, in all positions including scaffolding and curing etc. |
| 16 | Providing and applying two coats of waterproof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary,cleaning and preparing the surface, watering for two days etc. complete. |
| 17 | Providing and fixing mild steel grill work for windows, ventilators etc. 15kg/Sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrsive paint and two coats of all painting complete. |
| 18 | Providing and laying in situ cement concrete M- 20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20 mm deep with necessary refilling with bitumen etc. complete. |
| 19 | Providing structural steel work in trusses, other similar trussed purlins and members with all tracing gusset plates eto, as per detailed designs and drawings or as drected including cutting, fabricating, hoisting, erecting fixing in position, Making siveted bolted/welded connection and one cont of anticorrosive paint and over 2 costs of oil painting approved quality and thade etc complete |
| 20 | Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss member sand the like, as per detailed design sand drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/welded connections and one coat of anticorrosive paint and overit two coats of oil painting of approved quality and shade etc. complete. |
| 21 | Providing and fixing colour coated Zincalume (R) AZ150 ( min 150 gms/sq.mt total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 045 mm Base Metal Thickness (BMT) (0.5 mm TCT), H strength steel with min 550 MPa yield strength, metalic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43 4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface Profile sheet shall have nom 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib |
| 22 | Roof Accessories Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge- |
| 23 | Providing and Fixing rolling shutter fabricated from steel laths ofminimum thickness 0.9 mm with lock plate of 3.15 im thickness red with 35 x 35 x 5 mm angle section had with sliding bet and handles for both sides, deep MS channel section of eph and hickness hot less than 65 mint and 3.15 mm respectively with hond at aangements MS. Bracket plate 300 x 300 x 3. 15 mm male and shape with square bar, suspension shaft of in 32 mm diameter, hood Cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and warms high grade cast iron or mid steel and one coat of red lead primer etc. complete (I.S. 62481979) (Without mechanical near) |
| 24 | Electrical work :- Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/pipe as per specification no. CB-T/CU |
| 25 | Making trench of suitable width and depth In hard murum /tar road for laying provided LT cable up to and including 16 sq. mm complete as per specification no. CW.EXNCIR |
| 26 | Making trench of suitable width and depth In soft sol for laying provided LT cable up to and including 14 sq.mm complete as per specification no, CW-EXN-CTR |
| 27 | Supplying & erecting mains PVC unarmoured cable 1100 Volt grade ISI mark 3 core 6 |
| 28 | Supplying erecting weatherproof powder coated distribution board 4 way with 2 x 6/10 Amp S. P. M. C. B. with industrial two pin plug socket 10 A and 3 pin plug top 10 A with top cover necessary connection etc complete with approved make. |
| 29 | Providing point wiring for street light with PVC unarmoured cable 1100Volt grade ISI mark 3 core 1.5 sqmm stranded/solid copper erected on wall with G. 1. Saddle duty painted @ 0.25 m C/C rigidly grouted in the wall with the help of plated screw including 4\\"x 4\\" M. S. box 2 way with epoxy painting. 7 Supplying & erecting 10-12W, 230v Integral type LED Lamp suitable for 8-22/E-27 base. |
| 30 | Supplying & erecting 10.12W, 230V integral type LED Lamp suitable for B-22/E-27 base. |
| 31 | Supplying and erecting LED street light fitting suitable for 20 to 25W, with PF> 0.95 class IP 45 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as perspecification No FG-ODF/FLS |
| 32 | Supplying and erecting street light Wall bracket made hom 40 mm. dia 8' class G.l. pipe 1.2 m in total length complete as per specification no. FG-BXT/WB |
| 33 | Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP |
| 34 | Providing pipe type earthing with 40mm, dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials or per specificallon no. EA-EP |
| 35 | Supplying, erecting & marking DPMCB LA lo 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB |
| 36 | Supplying, erecting & marking SPMCB 6A to 32A, B-series (for lighting) in provided distribution board as per specification no. 5W- SWR/MCB |
| 37 | Royalty - METAL 40 MM & ABOVE |
| 38 | Murrum |
| 39 | Material Lab Testing Cement Concrete cube- Compressive Strength M10,M15,M20 |
| 40 | Cement :- Intial seating time, Final setting time,Specific Gravity,Soundness,Fineness moduls |
| 41 | Sand :- Fineness Modules, Silt & Clay Content |
| 42 | C.B. Metal :- Water Absorption, Specific Gravity, Impact Value, Crushing Value |
| 43 | Bricks:- Water Absorption,Compressive Strength & Efflorescence (Set of 5 Bricks) |
| 44 | Steel TMT ;-Tensile Strength,%Elongation,Yield stress,Wt.per RMT,bend,rebend,proof tests |
| 45 | Soft murum :- Liquid limit & plastic limit |
| 46 | Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Social, Health and Safety (ESHS) risks and ESHS Code of Conduct Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender