Tender For Deep Drilling Of 125 Mm Dia Bore Holes By Using Odex Method Including Providing, Installation, Testing, Commissioning Of Submersible Pumps Set At (02 Nos) Different Locations In District Jammu On Turnkey Basis (Epc) Under District Capex Bu
Tender Value
11.88 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
1 days left
EMD
23760
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Deep Drilling Of 125 Mm Dia Bore Holes By Using Odex Method Including Providing, Installation, Testing, Commissioning Of Submersible Pumps Set At (02 Nos) Different Locations In District Jammu On Turnkey Basis (Epc) Under District Capex Budget (2026-27)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Jul-2026 | Extension Notice II of e-NIT No. GWD/79 of 2026-27 | Date | 30-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Deep drilling of bore hole 125 mm dia. up to 130 M BGL as per the strata encountered and then providing installation, testing and commissioning of Submersible pump set along with allied material as per IS specifications by using ODEX method. The job includes extraction of MS Casing Pipe if any required during the drilling work. |
| 2 | Providing of 125 mm dia. M.S. Casing Pipe. The 125mm dia. M.S. Casing Pipe ISI marked should have thickness of 5.4mm conforming to as per IS 4270 / 2001 medium class (Part-I) 2004 (Heavy C – Class) electric resistance welded beveled ended inside bead free pipes. All pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. There should be no circumferential weld. The pipe from inside should be bead free having smooth finish. Each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with IS 4270/2001 with latest amendments. All the physical and chemical properties of pipe including tensile strength should be in accordance with IS 4270/2001 with latest amendments. |
| 3 | i. Providing/fitting of G.I. Pipe 32 mm dia (Medium Class) up to 90 Mtr./as per site requirement. Then cutting of G.I/ pipes of 6.00 m length in 03.00 m each. Then providing and fabrication of M.S. Flanges and welding the same on both sides of G.I. Pipes in proper alignment. Complete job including cost of G.I. Pipe, MS Flanges and other miscellaneous items and cost of carriage /transportation of material from workshop to the site of work. (Complete Job)ii. Providing, fitting, installation, testing and commissioning of Submersible Pump set of genuine make with minimum discharge of 2000-2500 LPH up to head of 120m/as per site requirementof reputed make conforming to IS Code: 8034. The job includes carriage of material to the site of work and lowering of submersible pump set in to the bore hole by way of coupling of flanged G.I. Riser Pipes with fixtures such as nuts, bolts & washers and making of electrical connections with starter panel. Fabrication of well cap, tie rod along with G.I. bend, elbow for delivery of water. Complete job includes cost of material, labor, T&P and transportation charges. (Complete Job)iii. Providing, fitting and installation of submersible motor starter and Main Switch in sheet enclosure type of reputed make including fabrication of steel enclosure outdoor electrical cabinets with canopy for motor starter. (Complete Job)iv. Providing and laying of 4.00 sq.mm submersible cable 130.00 m/as per site requirement& also providing and fitting of 6.00 sq.mm aluminum cable 20m/as per site requirement as service line required from LT Pole to starter panel of reputed make. Making of electrical connections with the starter panel , service line and submersible pump set after properly thimbling and testing and commissioning thereof. (Complete Job) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender