Tender For Special Repair Works To C & D Block In 240 Mla Quarters At Omandurar Government Estate, Chennai-2
Tender Value
3.65 Crore
Estimated cost
Bid Submission
28 Jul 2026
17 days left
EMD
1.93 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Works To C & D Block In 240 Mla Quarters At Omandurar Government Estate, Chennai-2
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the damaged floor finish and dadooing walls in cement mortar with mosaic tiles / Glazed tiles/cuddapah slab and clearing away with carefully stacking the material useful for reuse for any thickness etc., complete complying with standard specification and as directed by the Departmental officers. |
| 2 | Providing two legged scaffolding using 48.30mm dia heavy duty MS pipe over all height of 3.00m the distance between 2 legs being 1.25m and the spacing of the post being 2m in each rows and providing platform with C.W. planks using 40mm thick silver oak and 1.00m wide in complete form with horizontal bracings @ 1.50m c/c vertical direction and with cross bracings using same 48.30mm dia including cutting, threading assembly with red oxide primer, labour charges cost of speicals such on large plate, shoe, carcher, coupling, bolt and nut transportation charges and handling charges. The bottom of vertical post shall rest on 300x300x70mm 1:2:4 concrete base as per the standard specification and as directed by the departmental officers. |
| 3 | Initial Height of 3.00m |
| 4 | Additional Height of 2.50m |
| 5 | Manufacturing, supplying and fixing in positon of RCC Jally of 5cm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing, curing, lifting, fixing in position etc., complete complying with standard specification and as directed by the departmental officers. |
| 6 | Providing and Applying high strength, hybrid polyurethane Waterproofing coating which is two component, cold applied, water based acrylic and UV resistant water proofing treatment to the Existing Roof screed surface applied @ 1.6 L/m2 in 3 coats to achieve 1mm DFT, having tensile strength with 45 gsm glass fibre mesh 10N/mm2 , Elongation ≥ 200%, confirming to ASTM D2370; Abrasion resistance 15mg confirming to ASTM D 4060 and Crack bridging ability up to 3 mm, including surface preparation, ensure surface in SSD condition for first coat and spreading 45 gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwiched between the first and second coat completely as per specification. The finished cost to include surface preparation, making coving at Junction, treatment of cracks completely as per specification. |
| 7 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 8 | Providing, mixing, laying polymer based water proofing treatment for the Sunken toilet by applying cement based, flexible, water proofing compound confirming to IS:2645, to a thickness of 1mm of the prepared surface of the roof slab/floor slab as per specifications mentioned above providing cement mortar 1:3, water proofing cover plaster to a thickness of 12mm over the membrane coating with admixture of approved make. Rate quoted is inclusive of preparation of surface, which includes cleaning of surface polymer mortar curing, labour, tools and equipment, etc. Rate inclusive of cement and sand required for the treatment, the cost and labour charges for fixing 25mm dia pressure pipes 15kg/cm2 to a length of 45cm for drip pipes, etc. complete. |
| 9 | Flooring with ceramic tiles of following size and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 10 | Pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the Materials should be got approved by Executive Engineer before use on works) |
| 11 | Fabricating Supplying and fixing in position of Aluminium anodised Powder Coated of single leaf door with 12mm thick both side Bison board at top and bottom .The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: [email protected] kg/m and Bottom rail: 100x44.45x2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m,Alu. Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Eachs., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bushincluding cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specification and as directed by the deparmental officers.. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete. Aluminium sections, and furniture fittings shall be got approved by the Executive Engineer incharge. |
| 12 | Providing and fixing 25 mm thick solid Wood Polymer Composite (WPC) door shutter of approved make( Rajshree/ Equivalent) , manufactured from high-quality virgin PVC resin, wood flour and additives by extrusion process, having a minimum density of 0.75 g/cm³ (750 kg/m³), with smooth factory-finished surface, moisture-proof, termite-proof, borer-proof, fungus-resistant and fire-retardant properties. The shutter shall be fixed to approved WPC door frame using stainless steel butt hinges and complete with stainless steel tower bolt, mortise handle, door stopper, screws and all necessary hardware. The work shall include transportation, loading and unloading, cutting, fitting, alignment, fixing of frame with suitable fasteners, filling gaps with cement mortar/PU foam, making good the jambs, cleaning the site and providing all labour, materials, tools and plants, complete in all respects as directed by the Departmental Officers |
| 13 | Supplying and fixing in position damaged PVC panelled door ( Syntex / Equivalent) and cupboard shutters hollow type - 200 mm x 20 mm panels with 1 mm wall thickness for panels and styles and rails of suitable size with 2 mm wall thickness suitably reinforced using MS Angle / Flat including cost of necessary Aluminium hinges and other furniture fittings. Complete complying with standard specification and as directed by the departmental officers. |
| 14 | Renewing and refixing in damaged door Stopper with new one of Brass Door Stopper of approved make (DYNA make or its equivalent) including cost of CP screws etc complete complying with standard specification and as directed by the departmental officers. |
| 15 | Renewing and refixing in position damaged door closer with newe one of Door closer (DYNA make or its equivalent) with necessart screws and nails including labour charges etc.,Complete and as directed by the departmental officers at site of work. |
| 16 | Supplying fabricate manufacturing, placing and fixing the new aluminium powder coated fly mosquito proof window shutter of using shutter frame of size 20mmx12m with horizontal middle stiffener of size 20 mmx12mm and fixing stainless steel 304L grade mesh of approved quality, including cutting the mesh required size and fixing along with shutter with nesecessry hinges arrangement, pivot closer all-round the window shutter etc complete complying with standard specification and as directed by the departmental officers. |
| 17 | Supply and fixing Weld mesh 2.50cmx2.50cm 10 gauge including labour charges for fixing and cutting welding charges etc., complete complying with std. specification and as directed by the deptl. Officer. |
| 18 | Supply and fixing in position pigeon net including labour charges for fixing and cutting welding charges etc., complete complying with std. specification and as directed by the deptl. Officer. |
| 19 | Repolishing the existing marble flooring after cleaning with required chemical reagents such as tin oxide, oxalic acid etc., and polishing with polishing stone of various roughness such as Rough, medium and nice etc., with necessary tools and machinery to remove scratches etc., including cost of required materials, cost of polishing stone, hire charges of polishing machine complete complying with standard specification and as directed by the departmental officers at the site of work. |
| 20 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make ( Parryware / Equivalent) with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) |
| 21 | Supplying and fixing in position best quality and approved ( parryware / equal) make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 22 | Paving the floor with best approved quality fine polished Granite Stone Slabs of required size and Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work) |
| 23 | Renewing the damaged broken unservicewable Health faucet with new one of Two way bib cock tap with flexible hose 15mm dia (Parryware / Hindware/ equivalent) of approved quality and make including labour charges for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 24 | Supplying and fixing approved best quality (Parryware / Hindware/ equivalent) brass CP towel rack 600mm long with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 25 | Renewing the damaged broken unservicewable Wall mixer tap with new one of C.P. coated two in one wall mixer tap of approved quality (Parryware / Hindware/ equivalent) and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 26 | Supplying and fixing in position Indian make bevelled edge mirror of approved quality and size, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) |
| 27 | Special Type Mirror of size 1000 x 780mm |
| 28 | Renewing the damaged broken unservicewable shower rose withnew one of (Parryware / Hindware/ equivalent) shower rose with arm and wall flange Parryware of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 29 | Supplying and fixing in positon Parryware Indian Water Closet with flushing tank of size 580 x 440mm white glazed earthern ware of approved quality and brand with \\"P\\" or \\"S\\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works). |
| 30 | Supplying and fixing in position 15mm dia special type SS Long body tap (heavy duty) of approved make (Parryware / Hindware/ equivalent) conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 31 | Supplying and fixing position PVC Nahani Trap of size 100 x 75mm with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) |
| 32 | Supplying and fixing in position 15mm dia brass swan neck tap (heavy duty) of approved make (Parryware / Hindware/ equivalent) conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 33 | Renewing the damaged broken unservicable Soap tray with new one of C.P coated Soap tray of size150mmx100mm approved quality and make including labour for fixing in position etc., complete complying with standard specification and as directed by the departmental officers at site of work. |
| 34 | Supplying and fixing Stainless steel coated towel ring (Parryware / Hindware/ equivalent) 150mm dia meter with brackets of same materials including cost of teak wood plug and CP screws etc complete complying with standard specification and as directed by the departmental officers |
| 35 | Supplying and fixing in position Stop cock (Parryware / Hindware/ equivalent) arrangement of size 15mm dia etc., complete complying with standard specification and as directed by the departmental officers |
| 36 | Renewing and laying and jointing UPVC Pipe(Un-Plasticized Polyvinyl Chloride) UPVC used for residential and home applications,( Astrol/ Equivalent) water pressure in residential areas do not normally exceed the maximum tolerance.(schedule-40) but excluding cost of such specials and fixing in position dismantling masonry and make the same to original condition etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 37 | For laying UPVC pipe line of 20mm dia |
| 38 | For laying UPVC pipe line of 25mm dia |
| 39 | Renewing and refixing UPVC special of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 40 | 20mm dia UPVC Elbow |
| 41 | 20mm dia UPVC Tee |
| 42 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. |
| 43 | 20mm dia |
| 44 | 25mm dia |
| 45 | Renewing the damaged Polycarbonate sheet with new one of 6mm thick including cost of material, loading and unloading charges, labour charges for fixing etc., complete complying with standard specification and as directed by the departmental officers at the site of work. |
| 46 | Supplying and fixing in position best quality PVC soil / waste pipes ( Kisan/ Finolex / Equivalent) of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 47 | PVC Soil Pipe of 75mm dia |
| 48 | PVC Soil Pipe of 110mm dia |
| 49 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes ( Kisan/ Finolex / Equivalent) having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \\"U\\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. |
| 50 | 160mm dia PVC Pipe |
| 51 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 52 | 110mm PVC Tee with Single Door |
| 53 | 75 mm PVC Tee with Single Door |
| 54 | Repairing and servicing the damaged PVC cupboard and door shutters with frame alround including furniture fittings such as handles, hinges, padlock etc., including labour charges for fixing, conveyance charges etc., Complete complying with standard specification and as directed by the departmental officers. |
| 55 | Revarnishing the old wood work with two coat of Melamine varnishing including thorough scrapping, brushes, labour charges and cost of varnish etc., complete and as directed by the departmental officers. |
| 56 | Repainting the old iron work two coats of synthetic enamel paint of approved quality and colour and brand including thorough scrapping preparation of surface and finishing neatly etc complete complying with standard specification and as directed by the departmental officers at site of work.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 57 | Repainting the walls with two coat of interior emulsion paint of approved quality and colour including cleaning and thorough scrapping the walls and rendering the walls smooth with necessary brushes, labour charges and scaffolding charges etc., Complete complying with standard specification and as directed by the departmental officers. |
| 58 | Supplying and painting the walls with Two coat of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications and as directed by the departmental officers. (The wall putty shall be got approved by the Executive Engineer before use of work). |
| 59 | Supplying and fixing in position Bison board of thickness 12mm with rubber beading alround with necessary screws and nails etc., including labour charges for fixing and conveyance, complete complying and as directed by the departmental officers at the site of work. |
| 60 | Supplying and fixing in position SFRC cover slab of size 900mm x 900mmm including labour charges for fixing in position and conveyance etc., complete complying with standard specification and as directed by th departmental officers at the site of work |
| 61 | Brick Jelly Lime Concrete 1:2:5 (One lime, two sand and 5 brick jelly) using 20mm brick jelly in Lime Mortar 1:2 complete complying with standard specification and as directed by th departmental officers at the site of work |
| 62 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 63 | Plastering with Cement Mortar 1:3 (One cement and Three sand), 20mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 64 | Labour charges for removing and refixing the aluminium doors and windows shutters from its position with new rubber beading, L angel, Screws and replacement of damaged glass panes with necessary rubber beading, stays, hinges and other materials if necessary including cost of materials, labour charges and dismantling brick or RCC and redoing the same to its orginal condition etc., complete complying with standard specification and as directed by the departmental officers at site of work. |
| 65 | Removing weeds, wild growth, bushes and unwanted vegetation including uprooting roots, removing and disposing debris, and applying approved herbicide/weed-control chemical to prevent regrowth, complete as directed by the Departmental officers. |
| 66 | GST at 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender