Tender For Provision Of Internal And External Electrification Arrangements To Ware House For Proper Storage Of Evms & Vvpats At Chengalpattu In Chengalpattu District.
Tender Value
91.30 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
13 days left
EMD
55700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Internal And External Electrification Arrangements To Ware House For Proper Storage Of Evms & Vvpats At Chengalpattu In Chengalpattu District.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 4 points / Coil) Higher End |
| 2 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End |
| 3 | Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb |
| 4 | Supply and fixing of 4 feet LED 20W Fitting with LED 20W complete with TW round block on wall or ceiling with PVC unsheathed FRLS leads from terminal to the fitting |
| 5 | Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (Higher End) complete with conduit pipe suspension from the ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting with tube |
| 6 | Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. |
| 7 | Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting . |
| 8 | supply and fixing of 1200mm (48\\") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 1 metre down rod on the existing fan clamp |
| 9 | Supply and fixing of 300mm (12\\")sweep (lightduty) Ac exhaust fan complete with necessary wall opening and making good of the wall |
| 10 | Supply and fixing of louvers shutters arrangements for 300mm (12\\") sweep (light duty) AC exhaust fan |
| 11 | Supply and fixing of 375mm (15\\")sweep (Heavyduty) Ac exhaust fan complete with necessary wall opening and making good of the wall |
| 12 | Supply and fixing of louvers shutters arrangements for 375mm (15\\") sweep (light duty) AC exhaust fan |
| 13 | Supply and fixing of 3nos.6A two module socket , 1 no. 6/16A two module socket , 3 nos. 6A one module switch, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End |
| 14 | Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End |
| 15 | Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for ACPlug in flush with wall with earth connection (For AC Plug) |
| 16 | Supply and fixing of 32A DP MCB in flush with sheet enclosure in wall with connection ( For Steet light and UPS In and out ) |
| 17 | Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End |
| 18 | Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End |
| 19 | Supply and fixing of 6 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1 No 160A 4P MCCB as incoming and 4 Nos 63A 3P MCB, 6 Nos 6A to 32A SP MCB as outgoing with suitable cable end box in flush with wall with Earth connection only. Higher End |
| 20 | Supply and fixing of 100 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD Earthing. |
| 21 | Supply and fixing of 200A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double brEak on suitable angle iron frame work with MS cable entry boxes with PWD Earthing. |
| 22 | Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2\\" x 1-1/2\\" x 1/4\\" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (500V), 1 No. neutral link, copper earth flat of size 1\\" x 1/4\\" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete |
| 23 | Supply and run of 2 of 4sq.mm.PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable pvc pipe concealed in wall and ceiling with continuous earth wire connectionby4sq.mmcopperwire and making good of the concealed portion wiith suitable colour |
| 24 | Supply and Run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable pvc pipe concealed in wall and ceiling with continuous earth wire connection of 1.5 sq mm copper wire with painting of suitable colour. |
| 25 | Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable pvc pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq mm copper wire with painting of suitable colour. |
| 26 | Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position. |
| 27 | Supply and clarnping of 3-1/2 x 95 sq.mm.PVC LTUG armoured cable on post or on wall with MS clamps |
| 28 | Supply and Laying of 3 1/2 x 95 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 29 | Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection |
| 30 | Supply and providing cable end termination of 3 1/2 x 95sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete |
| 31 | Supply and laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 32 | Supply and clarnping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps |
| 33 | Supply and fixing of brass cable gland for 4 x 16 /( 4 x 25 ) sq.mm. PVC armoured LTUG cable with earth connection |
| 34 | Supply and providing cable end termination of 3-1/2 x 25/4x16 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete |
| 35 | supply and fixing of 65 mm dia. (2 -1/2\\") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour . |
| 36 | Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection |
| 37 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class'B'GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangement swith necessary masonry work and with 38mm RCC cover slab for the brick masonry |
| 38 | Supply and erection of Indoor units of 2 Ton capacity (3 Star Rated) Split type Airconditioner unit confirming to ISI 1301 (Part-2) 1992 with amendment No.1 fitted with Hermetically sealed compressor operation on 230 V 50Hz AC Supply system with energy efficient operating system with refrigerant gas R-22 suitable for high wall mounting evaporator and specification as under general requirement interconnection of pipes and cables. (Make : Blue Star, Carrier, Voltas/Equ) (SR)(3 star rated) |
| 39 | Supply and erection of 5 KVA Capacity Automatic voltage stabilizer suitable to operation on 230 Volts, single phase, 50Hz, AC supply system with time delay relay and High/Low voltage cut off, input voltage range 170V to 270V single phase, wall mounting type stabilizer with necessary clamp. (SR) (Make : V-Guard/Equ) |
| 40 | Supply and laying of 5/8\\" and 3/8\\" Copper Pipe (Extra beyond 3 metres supplied with AC unit |
| 41 | Supply and fixing of water drain pipe line (1\\" PVC pipe) |
| 42 | Supply and fixing of Ms stand for fixing outdoor unit |
| 43 | Supply and fixing of 3 KVA UPS 1 PHASE UPS (Single Phase In & Single Phase Out) CAPACITY - SYSTEM WITH BATTERY - 2 HOURS BACK-UP |
| 44 | Supply , Testing Commissioning and Handing over of 1 No 40 KVA Diesel Generator Set with acoustic enclosureconforming to CPCB IV+ Norms and BISSpecifications With AMF Panel Diesel Generator set of 0.8 P.F. Three phase 415V/ 420 Volts, 50Hz, 1500 RPM CPCB Approved capacity comprissing of Kirloskar Engine model 6R 1080TA developing 154 BHP water cooled clock wise rotating feed pump with 36KW/40 KVAoperating capacity brushless alternator close coupled underneath fuel tank standard safeties LLOP with stop solenoid battery with lead Electric start and vibration fitting and accessories and AMF panel as detailed below including transporting & unloading charges.(A) Engine: Water cooled diesel engine suitable for Generator application with a shaft out put of 154BHP at 1500 RPM under NTP conditions. The Engine shall comprise the following standard fitting flexible coupling fly wheel, ai cleaner, fan blower, radiator, water pump, fuel filter, lubricating oil filter, etc. |
| 45 | (B) 12/24 Volt Electronic starting Equipment:Complete with starter motor, dynamo, standard batteries with cable, flexible exhaust piping of 50cms length.(C) ENGINE INSTURMEN PANEL / MOUNTED:Starting push botton / starting key, lubricating oil, temperature gauge, lubricating oil pressure gauge, water temperature gauge, safety control for low lubricating oil, pressure, safety control for high water temperature, safety control for over speed, hour meter (mechnical ) and RPM indicator, battery charging ammeter. The engine should be capable of providing 10% over load for one hour for every 11 hours continuous at full load.(D)ALTERNATOR:40 KVA/36 KW Capacity of brushless alternator, AC 3 phase, 50Hz, 415/420V, 0.8 PF, 1500 RPM under NTP conditions, conforming to IS:13364 (Part-II)/ 1992 to be means of coupling.(E) AMF CONTROL PANEL:The AMF control panel (cubical) should be fabricated with vermin proof and dust proof best quality sheet steel and floor mounted with removable rear panels and hinged front doors with enamel painted and incorporating the following with suitable provision for connection incoming and outgoing leads having been made on the control panel. |
| 46 | 1. AC Ammeter and selector switch. 2 . Volmeter and selector switch. 3. 3Nos current transformer with suitable ratio 4. Frequency meter 5. KWH meter6. 1 No power factor meter 7. Battery charging set comprising of the following for charging the battery from mainsa. Transformer / Rectiferb. DC Ammeterc. DC Volt meterd. ON / OFF switche. Charging rate selector switchf. push button startg. push button stoph. push button reset8. 1 set Air break contactor with auxiliary netural contactor for main supply 9. 1 set Low volage HRC fuse for the short circuit protection of the main supply 10. 1 set Alternator contactor with auxiliary netural contactor. 11. 1 set Three pole bimetal release for over load protection of alternator 12. 1 set low voltage HRC fuse for the short circuit protection of the alternator 13.1 set DC control relays incorporating engine start/ stop and failure to start / lockout 14. 1 set selecor switch auto/ manual |
| 47 | 15. 1 no Push button \\"Start\\" 16. 1 no Push button \\"Stop\\" 17. 1 no Push button \\"Reset\\" 18.1 No signal lamp for indicating load on mains 19. 1 no signal lamp for indicating load on set. 20.1no signal lamp for indicating set fails to start. 21.1no signal lamp for indicating set running. 22.1No signal lamp for indicating battery 23. 1set Pilot lamps of 3 nos 24. MCCB of 250A capacity with magnetic thermal overload release, instant start circuit trip and under voltage release switch. 25.Rectangular copper bus bars (1No for each phase, neutral and earthing terminals) of adequate capacity duly colour coded with head shrinkable PVC sleeves. 26.1No mains voltage monitor 27.Hooter/Audio alarm for indicating set fails to start and for DG O/L. 28.1set Timers 29.Audio and Visual indicator arrangements for: a) Low lubricating oil pressureb) High water temperaturec) Over speed 30.1No Earth fault relay31.Isolator to isolate the neutral Note:- 1. The control panel should be complete with necessary fuses, cables, label, other accessories with neutral isolation arrangements.2. The engine should trip for the following: a) Low lubricating oil pressureb) High water temperature c) Over speed |
| 48 | 3.Supply and fitment of Auto Mains Failure Panel, 1 EB Service wih 63 Amps switch and contactors SUF Control relays, timers etc suitable for auto change over of DG & EB Service. F.FUEL TANKFuel tank of 200 litres capacity and with inlet and outlet connections, level indicator with scale etc. G.BASE FRAME:Base frame should be fabricated with MS channel frame of rigidly welded construction for mounting of generaor set. The engine and alternator should be coupled by suitably designed diaphragm type flexible coupling with guard and mounted on the base frame wih proper alignment.H) ACOUSTIC ENCLOSURE:The Acoustic enclosure, Self standing weather proof KG- CPCB Typed Acoustic canopy KG 250WS floor mounting type with modular construction with the provision to assemble and dismantle easily and designed to suit all weather condtions. Erection of acoustic enclosure suitable for 40 KVADiesel generator complete with all accessories as above and suitable supports etc. 1. Supply of manuals for operation & maintenance of DG set with warranty card etc. |
| 49 | Supply and run of 25mm x 3mm tinned copper flat with necessary clamps/supports on wall / floor/ground for earth connection |
| 50 | Erecion of Get set:-Providing suitable concrete foundation with cement concrete 1:2:4 with sand cushion around the foundation erection of 40 KVAGenerator set over the exisiting foundation and erection of Generator set with proper alignment over the existing foundation to suit 40 KVAGenerator set Foundation size L4200xW1600xH200mm. |
| 51 | Goods Lift:- Design, Supplying, Erection, Testing and commissioning of Machine room less GOODS lift with Pre Coated Steel Grey and Blue finish to carry 1500 Kgs as per following detailsSpeed = 1.00 Mtr / Sec, Travel Distance = 12 Mtrs, Number of Floors = G + 2, Positing of Machinery = Machine roomless, Design of Lift Car = Pre-Coated steel (Grey & Blue), Car Ceiling - Car Floor = standard - standard -m.s. cheq. plate flooring, Car Fittings - Indirect LED Tubelight & Regular (Circular) - Fan Type Of Car Front Entrance Protection - Power Operated Centre Opening 4 panel sliding door - Precoated Steel - Blue, Type Of Control System - Microprocessor Based simplex selective collective control With / Without attendent, Special Inclusion, Battery Operated Emergency Light And Alarm Bell Call Register Signal And Vf Door Operator, Landing Push Button In Landing Door Frames, |
| 52 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open MS conduit Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End( 5 points / Coil) Higher End (LIFT WELL) |
| 53 | Supply and fixing of WT bulk head fitting with guard suitable for 15W LED lamp with LED bulb ( Lift Well) |
| 54 | Supply Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End () (for Lift well) |
| 55 | Supply of lubricating oil to run the Generator set for minimum of 8 hours by supply of disel |
| 56 | GST at 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender