Tender For Proposed Veterinary Dispensary For A.H & V.S Department At Chicalim Vasco Goa In Dabolim Constituency.
Tender Value
2.05 Crore
Estimated cost
Bid Submission
16 Jul 2026
5 days left
EMD
4.10 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Veterinary Dispensary For A.H & V.S Department At Chicalim Vasco Goa In Dabolim Constituency.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including up rooting of rank vegetation grass bush wood trees and sapling of girth upto 30 cm. measured at a height of 1 m above ground level & removal of rubbish upto a distance of 50 mt. outside the periphery of the area cleared. (if however, only grass is met with the area will be measured and paid for under item 4001). |
| 2 | Demolishing R.C.C. work including stacking of steel bars & disposal of unserviceable within 50 mts. lead. |
| 3 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. All kinds of soil |
| 4 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in :All kinds of soil |
| 5 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete |
| 6 | Providing & laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded granitic or basaltic stone aggrt. 40 mm. nominal size) excluding cost of centering, shuttering and finishing in: All works upto plinth level |
| 7 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) a) All works upto plinth level |
| 8 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) b) In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level |
| 9 | Providing and laying reinforced cement concrete of grade M-25 (Mix design) with coarse sand & graded granatic or basaltic stone Aggregate 20 mm nominal size as per mix design requirment excluding plastering & cost of centering/shuttering & reinforcement. including admixtures in recommended proportions as per IS 9103 toaccelerate, retard setting of concrete, imporove workability without impairing the strength and durability as per the direction of the Engineer in charge. M-25 grade of reinforced cement concrete by using 410 kg of cement per cu.m of concrete. All works upto floor five level. |
| 10 | Providing & laying cement concrete 1: 1.5: 3 (1 cement: 1.5 coarse sand: 3 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:In retaining walls , return walls(any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level. |
| 11 | Centering & shuttering including Strutting, Propping & removal of forms for : Foundations, Footings, Bases for columns |
| 12 | Centering & shuttering including Strutting, Propping & removal of forms for : Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like |
| 13 | Centering & shuttering including Strutting, Propping & removal of forms for : Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan) |
| 14 | Centering & shuttering including Strutting, Propping & removal of forms for : Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth |
| 15 | Centering & shuttering including Strutting, Propping & removal of forms for : Staircases (except spiral staircases) excluding landing |
| 16 | Centering & shuttering including Strutting, Propping & removal of forms for : Suspended floors, roofs landings, shelves & their supports |
| 17 | Centering & shuttering including Strutting, Propping & removal of forms for : Vertical or horizontal fins individually forming box louvers or projected bands |
| 18 | Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates i)Where inclination to the horizontal does not exceed 30° requiring shuttering on the underside only |
| 19 | Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates iv)Cornices & Mouldings |
| 20 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. |
| 21 | Providing & laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size). |
| 22 | Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. a) Pre-construction |
| 23 | Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 24 | Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand in foundation upto plinth level Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level. |
| 25 | Half brick masonry in cement mortar 1:3 (1 cement : 3 coarse sand) with bricks of class designation 75 kg /cm2. b)Upto floor V level. |
| 26 | 12mm cement plaster 1:4 (1 cement : 4 coarse sand) |
| 27 | 12mm cement plaster 1:3 (1 cement : 3 coarse sand) |
| 28 | Neat Cement punning |
| 29 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 30 | 12mm cement plaster 1:4 (1 cement : 4 coarse sand) a) Extra for plastering on circular work not exceeding 6m in radius In one coat |
| 31 | 12mm cement plaster 1:4 (1 cement : 4 coarse sand) a)Extra for plastering done on moldings, cornices, or arch it raves including neat finish to line and level. In one coat |
| 32 | 6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand) |
| 33 | Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge. |
| 34 | Applying a coat of hot bitumen (maxphalt 80/100 or equivalent) using 1.5 kg/sq.m. on damp proof course after cleaning the surface with brushes and finally with a piece of cloth light soaked in bitumen. |
| 35 | Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 36 | Providing Pre-cast cement concrete jali1:2:4 (1 cement: 2 coarse sand: 4 stone aggreate 6mm nominal size) reinforced with 1.6mm dia mild steel wire including centering and shuttering, roughening, cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine snad) all complete excluding plastering of the jambs, sills and soffits. i) 50mm thick |
| 37 | Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon. Second class Indian teak wood |
| 38 | Providing and fixing flush doors shutters commercial type, cellular core construction with frame of first class hard wood and well matched commercial play veneering and vertical grains or cross bands and face veneers on the both other faces of shutters. b) 35mm thick including anodized aluminium butt hinges with necessary screws: |
| 39 | Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size. b)40 x 3 mm flat iron hold fast, 15 cm long |
| 40 | Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws. b)Ornamental grill |
| 41 | Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete. |
| 42 | Providing and fixing chromium plated brass sliding door bolt with bolts, nuts and screws etc. complete. a) 300 x 16 mm |
| 43 | Providing & fixing chromium plated brass tower bolts (barrel type) with necessary screws complete. b) 200 x 10 mm |
| 44 | Providing & fixing chromium plated brass tower bolts (barrel type) with necessary screws complete. d) 100 x 10 mm |
| 45 | Providing and fixing chromium plated brass handle with necessary screws etc. complete a) 125 mm |
| 46 | Providing and fixing chromium plated brass handle with necessary screws etc. complete b) 100mm |
| 47 | Provided and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutters thickness complete. |
| 48 | Providing FRP door shutters 35mm thick with frame size in clear opening of 0.75x2.10m hinges and screws complete., |
| 49 | Providing and fixing in position collapsible steel shutters with vertical channels 20 mm x 10 mm x 2 mm and braced with flat iron diagonals 20mm x 5mm size with top and bottom rails of T-iron, 40 x 40 x 6 mm with 38 mm dia. Steel pullys completely bolts locking arrangement, stopper, handles including applying a priming coat of red lead paint. |
| 50 | Providing and fixing in position S.S. hand rail in main stair case, and landing as per approved design shown in the drawing including bending handrail pipe to proper shape in curves with specials, etc. complete. |
| 51 | Providing and fixing of aluminium windows with three tracks and three shutters sliding windows with tubular frame sections powder coated with pure polyster powder of thickness 15-80 microns with approved standard acessories such as ball bearing rollers concealed lock, 6mm plain clear glass with EPDM beading etc. |
| 52 | Providing and fixing of aluminium window with 3 tracks and 2 shutters sliding window with tobular frame ployster powder if thicness 75-80 microns with approved standard accessaries such as ball beaing rollers, concealed lock, 6mm thick plain clear glass with EPDM beading etc. |
| 53 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Adjustable louvered windows. c) Figured glass |
| 54 | Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section |
| 55 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement. b) 50 mm thick |
| 56 | Kotah stone slab flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 corse sand) a) 20 mm thick. |
| 57 | Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 58 | Precast plain Cement Tacktiles 32mm thk of required shade in floors, treads of steps and landing laid on 25mm bed of cement mortar 1:4(1cement:4coarse sand) jointed with neat cement slurry with pigment to match the shade of tiles including rubbing and polishing complete. |
| 59 | Providing and fixing coloured ceramic tiles (Bell or equivalent) of 8\\" x 12\\" size and 6 mm thick in skirting and dados on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with cement slurry complete. |
| 60 | Providing valleys 90 cm overall in plain 1.60 mm thick G.I. sheet fixed with galvanized iron j or l hooks bolts 8mm dia G.I. limpet and bitumen washers complete. |
| 61 | Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint. b) In tees, angles, flats and channels |
| 62 | Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. |
| 63 | Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge. |
| 64 | Providing & fixing 20 mm caves barge broads 1st class matti wood |
| 65 | Providing and fixing Prince or equivalent make PVC SWR half round eaves gutter with bolts, nuts and flat iron brackets 40 x 3 mm size complete.b) 180 mm nominal size |
| 66 | Extra for providing flat iron bracket 50 x 3 mm size instead of 40 x 3 mm size with necessary bolts nuts, washers etc. for fixing A.C. gutters to purlins. |
| 67 | Extra for providing and fixing prince or equivalent make PVC SWR joint bracket with 2 clamps for socketed half round eaves gutters.b) 180 mm nominal size |
| 68 | Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m. |
| 69 | Finishing fine with neeru over plaster |
| 70 | Extra for providing and mixing water proofing material proportion recommended by the manufacturers. a) 12mm cement plaster 1: 3 (1 cement : 3 sand) |
| 71 | Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 72 | Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete. |
| 73 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 74 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. |
| 75 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for wood work of approved brand & manufacture in all shades on new work to give an even shade. |
| 76 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as Dulex/Asian paints/sherelin willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 77 | Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete. |
| 78 | Providing and fixing white vitereous china pedestal type (Europen type) water closet with seat as lid, whth C.I. brass hinges and rubber fitings 15 lts white vitreous china low level flushing cistern with fittings as brackets 40 mm white precelain 3enameled flush bad, 25 mm overflow pipe with specials and mosquito proof coupling of approved municipal design complete, including cutting and making good the walls and floors where required.b) W.C. pan with black plastic seat and lid. |
| 79 | Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. d) Flat back wash basin size 550 x 400mm with a single 15 mm C.P. brass pillar taps. |
| 80 | Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers. |
| 81 | Providing & fixing 600 x 120 mm glass shelf with C. P. brass brackets and guard rail complete fixed to wooden cleats with C. P. brass screws. |
| 82 | Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws b) 600 x 20 mm size |
| 83 | Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993 a) 15mm nominal bore |
| 84 | Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 a)15mm nominal bore |
| 85 | Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make or equivalent. Confirming to IS 8931;1993 a) 15mm nominal bore |
| 86 | Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : 20 b) mm nominal bore |
| 87 | Providing and fixing ball valve (brass) of approved quality a):High and low pressure with plastic floats: C(2) 20 mm nominal bore |
| 88 | Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore:C) 45 cm (18”) length . |
| 89 | Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet: a) 100 mm diameter. |
| 90 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. a) Inside size 90 x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x610mm internal dimensions total weight of cover ad frame to be not less than 38 kg. (weight of cover 23 kg. ) |
| 91 | Making soak pit. 2.5 m dia 3 m deep with 45x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm diameter, 1.8 m long complete filled with laterite stone aggregate 125 to 180 mm surrounded by laterite stone aggregate of 40 mm and down gauge as per standard design. |
| 92 | Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:a)110 mm dia |
| 93 | Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:b)75 mm dia |
| 94 | Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.a)110 mm dia |
| 95 | Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.b)75 mm dia |
| 96 | Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :a)100 mm dia |
| 97 | Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :b)75 mm dia |
| 98 | Providing and fixing NICKEL chrome plated copper alloy Fancy wall mixer non telephonic shower system Jaquar make or equivalent. Confirming to IS 8931;1993 |
| 99 | Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes :a)110 mm dia |
| 100 | Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes :b)75 mm dia |
| 101 | Providing and fixing R.P.V.C. vent cowl:a)110 mm dia |
| 102 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. a)15 mm dia nominal outer dia pipes. |
| 103 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) a)20 mm nominal outer dia pipes. |
| 104 | Providing and laying jet black mirror polish granite flooring and dado over 20mm thick base of cement mortar 1:4 laid over and jointed with cement slurry including rubbling complete Granitic slab (jet blck with mirror polish) 20 mm thick add q0% wastage 1.00 |
| 105 | Providing and fixing normal gauge polythene pipes of approved quality complete with special flange compression type fitting (of approved make) including trenching ad refilling etc (external work) (high density):d)25 mm nominal bore |
| 106 | Providing and fixing normal gauge polythene pipes of approved quality complete with special flange compression type fitting (of approved make) including trenching ad refilling etc (external work) (high density):b)50 mm nominal bore |
| 107 | Providing and fixing C. P. brass waste for wash basins and sink b) 40 mm dia. |
| 108 | Providing and alying 60 mm thick factory made cement concrete interlocking paver block of M30 grade made by heavy duty block making machine with strong vibratory compaction using 3 ton roller and of aprpoved size and design / shape laid in 50 mm thick compacted bed of course sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer. Additional cost for coloured paver blocks Yellow |
| 109 | Providing and fixing vitrified glossy finished (600x600) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 110 | Providing and fixing vitrified matt finished (600x600) Architect series and 10mm thick in floors, treads of steps, landings on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry compete. |
| 111 | Supplying and stacking of good earth at site including royalty and carriage upto 1 km. (earth measured in stacks will be reduced by 20% for payment). |
| 112 | Spreading of sludge, dung manure or/and good earth in required thickness (cost of sludge, dung manure or/and good earth to be paid separately). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender