Tender For Provn Of Scooter & Bicycle Stand Near Bldg No P-152 And Provn Of Trg Shed Behind Office Area Of Bldg No T-149 At Coochbehar Mil Stn Under Ge(S) Binnaguri
Tender Value
19.22 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
17 days left
EMD
38500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Scooter & Bicycle Stand Near Bldg No P-152 And Provn Of Trg Shed Behind Office Area Of Bldg No T-149 At Coochbehar Mil Stn Under Ge(S) Binnaguri
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified. |
| 2 | Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out in any type of soil and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified. |
| 3 | M&L for Plain Cement Concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified. |
| 4 | M&L for Plain Cement Concrete (1:2:4) type B2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified. |
| 5 | M&L for Providing, cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary use and waste of form work complete all as specified. |
| 6 | M&L for mild steel work in hand rails, wind ties, posts and struts screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 290 Grade E-165 complete all as specified. |
| 7 | M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified. |
| 8 | M&L for steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde- E- 250) quality- A complete all as specified. |
| 9 | M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, dia of neck 5 to 10mm complete all as specified. |
| 10 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated/ semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws any type and description complete all as specified. |
| 11 | M&L for preparation of new or previously untreated steel or iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 12 | M&L for hardcore broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified. |
| 13 | M&L for 100mm thick cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in sub base of floors and pavings including necessary use and waste of formwork complete all as specified. |
| 14 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified. |
| 15 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified. |
| 16 | M&L for brick work with old size burnt fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as per specified. |
| 17 | M&L for 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4, and surface finished even and fair (without using extra cement), complete all as specified. |
| 18 | M&L for preparing new wall surfaces plastered or unplastered and applying two coats of cement base paint complete all as specified. |
| 19 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thick in soil, complete all as per specified. |
| 20 | Removing excavated material exc. 500 m but n exc. 1.50 KM and depositing where directed complete all as specified. |
| 21 | M&L for providing precast reinforced cement concrete (1:1.5:3) type A1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in CM (1:4) including necessary use and waste of formwork complete all as specified. |
| 22 | M&L for mild steel TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender