Tender For Repair /Maintenance Of Chiller Pipe Line And Connected Works Of Various Ac Plants Under Ge(U) P&M, Delhi Cantt-10.
Tender Value
29.98 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
17 days left
EMD
59960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair /Maintenance Of Chiller Pipe Line And Connected Works Of Various Ac Plants Under Ge(U) P&M, Delhi Cantt-10.
BOQ
| Sl. No. | Item Description |
| 1 | Material and Labour for frame work with angle iron for frame support, with fabrication, welding joining alongwith cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) as well as all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including taking down old unserviceable one complete all as specified and as directed. |
| 2 | Supply, fixing and testing in replacement of three pole power contactors of capacity MNX-32 including NO or NC auxiliary contact block, coil voltage 230 V ,control wiring, thimbles, etc and including taking down of old one complete all as specified and as directed. (Make -L&T/Siemens/ ABB/ C & S.) |
| 3 | Supply, fixing and testing in replacement of three pole power contactors of capacity MNX-25 including NO or NC auxiliary contact block, coil voltage 230 V ,control wiring, thimbles, etc and including taking down of old one complete all as specified and as directed. (Make -L&T/Siemens/ ABB/ C & S.) |
| 4 | Supply, fixing and testing in replacement of three pole power contactors of capacity MNX-18 including NO or NC auxiliary contact block, coil voltage 230 V ,control wiring, thimbles, etc and including taking down of old one complete all as specified and as directed .. (Make -L&T/Siemens/ ABB/ C & S.) |
| 5 | Supply and fixing in replacement over load relay 30-50 Amps complete all as specified and directed (Make -L&T/Siemens/Legrand/ ABB/ C & S.) |
| 6 | Supply & fixing in replacement brass terminals of follwing ways complete all as specified and directed |
| 7 | 3 way |
| 8 | 4 way |
| 9 | 6 way |
| 10 | 10 way |
| 11 | M & L in replacement of unserviceable 3 way modulating motorized valve with Teflon gland, with linear movement actuator 24 V AC input supply, 0-10 V input signal with modulating thermostat & transformer of following sizes complete all as specified and directed. |
| 12 | 32mm dia |
| 13 | 40mm dia |
| 14 | 50 mm dia |
| 15 | 65 mm dia |
| 16 | 80 mm dia |
| 17 | 100 mm dia |
| 18 | Supply and fixing in replacement cast iron Y strainer flanged ends with SS perforated sheet screen of following size complete all as specified and directed (Make: - ADVANCE/ AUDCO/ LEADER/CASTLE/ NVR/ ZOLOTO). |
| 19 | 200mm dia |
| 20 | 150mm dia |
| 21 | 100mm dia |
| 22 | 80mm dia |
| 23 | 65mm dia |
| 24 | 50 mm dia |
| 25 | 40 mm dia |
| 26 | Supply and fixing in replacement cast iron butterfly valves lever operated SS disc type nitrile/EPDM rubber lining PN 16 of following size dia complete all as specified and directed.(Make: - ADVANCE/ AUDCO/ LEADER/CASTLE/ NVR/ ZOLOTO). |
| 27 | 200 mm dia. |
| 28 | 150 mm dia. |
| 29 | 125 mm dia. |
| 30 | 100 mm dia. |
| 31 | 80 mm dia. |
| 32 | 65 mm dia. |
| 33 | 50 mm dia. |
| 34 | Supply, Laying, jointing and testing of under electric cable XLPE insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor laid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed for the following sizes:- |
| 35 | 3.5 core 95 Sqmm |
| 36 | 4 core 70 Sqmm |
| 37 | Supply and fixing in replacement motorized spring return actuator for device with control panel and temprature sensor complete all as specified and directed. |
| 38 | Supply and fix in replacement Galvanised iron strip 32X6 mm as earth continuity conductor including fixing arrangement on suitable size insulator complete all as directed. |
| 39 | M&L earthing complete with GI plate electrode of size 600 x 600 x 6 mm thick buried directly in ground vertically at a depth not less 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level surrounded from all sides by 1.5 cm thick packed layer of charcoal of dust and common salt filling in alternate layers and making electrode connection by using GI strip of size 32X6 (up to 7 meter GI strip included) mm by means of bolts nuts check nuts and washers made of brass and earth strip protected by light grade 40 mm dia GI Pipe upto test point and connected to main switch board are main controlled board with provision of GI pipe medium grade 20mm bore for watering including funnel wire mass RCC pit cover and PCC Chamber pit with 1:2: 4 type C2 (including excavation earth work) all as specified and shown on plate No 5 of SSR Part-1. |
| 40 | Supply and fixing in replacement 80 mm dia cast iron non return valves of pressure class PN 1.6 including nuts, bolts, washers, gaskets, etc for Central type AC plants complete all as specifed and directed (Make: - ADVANCE/ AUDCO/ LEADER/CASTLE/ NVR/ ZOLOTO). |
| 41 | ditto- all as per item No. 14.00 above but 100mm dia |
| 42 | ditto- all as per item No. 14.00 above but 150mm dia. |
| 43 | Ditto- all as per item No. 14.00 above but 250mm dia. |
| 44 | Supply, Installation , Testing and commissioning in repair of perfabricated type cable tray of size 300 mm wide x 50mm x 1.6mm fabricated out of perforated hot dip galvanized sheet of minimum 1.6mm thick with 50mm flange to be installed horizontally or vertically. The cable tray shall be complete including cost of bends, elbows, cross, tees, reducers etc. site condition and rate shall include cost of anchor fastners, screw, nuts, bolts and misc. and other fixing hardware painting of support structure etc as required complete all as specified and as directed. |
| 45 | All as per Item No.18.00 above but of size 150mm wide x50mm x 1.6mm complete all as specified and as directed. |
| 46 | M&L for cutting of existing MS/GI water mains of size 80 mm dia of chiller/condensor/ cooling towers & GI pipes of make-up tanks of central AC plant at different points/section for replacement with new MS pipe in short lengths including MS fittings complete all specified and as directed |
| 47 | All as per item No. 20 here-in-before but of size 100 mm. |
| 48 | All as per item No. 20 here-in-before but of size 125 mm. |
| 49 | All as per item No. 20 here-in-before but of size 150 mm. |
| 50 | Taking out old unserviceable MS pipes and Supplying & laying , commissioning & testing mild steel (Heavy) 'C' class pipe of size 80 mm dia on exposed surface including welding works, connections with existing chilled water line, chiller, pump, fabrication of bends, MS flange, tees, reducers, shoe, support (brick masonry block & wooden support for underground / MS angle- clamp & wooden support for exposed surface) along with priming coat of steel primer as per standard specification complete all specified and as directed by Engineer-in-Charge. Note:- (i) The rates quoted by the contractor shall deemed to include the cost of MS fittings required during laying of MS Pipes. (ii) The Pipes of sizes 150 mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150 mm shall be heavy class of thickness min. 7mm as per IS: 3589. |
| 51 | All as per item No. 24 here-in-before but of size 100 mm. |
| 52 | All as per item No. 24 here-in-before but of size 125 mm. |
| 53 | All as per item No. 24 here-in-before but of size 150 mm. |
| 54 | M & L for Insulation of 40 mm M S Pipe with PUF slab 30 mm thick with and including applying bituminuous compound and GI cladding with 26 gauge GI sheet complete of sizes complete all as specified and as directed. |
| 55 | ditto all as per item no. 28 above but 50 mm dia MS pipe |
| 56 | ditto all as per item no. 28 above but 65 mm dia MS pipe |
| 57 | M & L for Insulation of 80 mm M S Pipe with PUF slab 40 mm thick with and including applying bituminuous compound and GI claddingwith 26 gauge GI sheet complete of sizes complete all as specified and as directed. |
| 58 | ditto all as per item no. 29 above but 100 mm MS pipe |
| 59 | ditto all as per item no. 29 above but 125 mm MS pipe |
| 60 | ditto all as per item no. 29 above but 150 mm MS pipe Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender