Tender For special Repairs To Road, Side Berms, Hardstanding, Culverts In Gtoc And Vlo Offrs Md Accn Under Ge(South) Bangalore
Tender Value
43.69 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
18 days left
EMD
87380
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repairs To Road, Side Berms, Hardstanding, Culverts In Gtoc And Vlo Offrs Md Accn Under Ge(South) Bangalore
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | M&L demolition of reinforced concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 3 | M&L Rough excavation not exceeding 1.5 m deep and getting out in soft/losse soil complete all as specified and directed |
| 4 | Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 M depth for foundation, etc. and nexc 10 sqm on plan and getting out in soft/loose soil and disposal of surplus soil upto n.exc. 50m distance complete all as specified and as directed. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed. |
| 6 | M&L Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed |
| 7 | M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation concrete complete all as specified. |
| 8 | M & L 10mm dia and over TMT bar, cut to length, bent to shape required incl. cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (Annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 9 | Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed. |
| 10 | Form work to sides of fdn and PB for rough finished surfaces of concrete complete all as specified and as directed. |
| 11 | M & L form work to columns for fair finished surfaces of concrete complete all as specified and as directed. |
| 12 | M & L form work to sides and soffits of beams for fair finished surfaces of concrete complete all as specified and as directed. |
| 13 | M & L Reinforced Cement Concrete 1:1 1/2 :3 Type A-1 using 20 mm graded crushed stone aggregate in foundations including rafts, footings and mass concrete complete all as specified and as directed. |
| 14 | M & L Reinforced Cement Concrete 1:1 1/2 :3 Type A-1 using 20 mm graded crushed stone aggregate) in columns complete all as specified and as directed. |
| 15 | M & L Reinforced Cement Concrete 1:1 1/2 :3 Type A-1 using 20 mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 16 | M & L hardcore of gauge n.exc. 63mm of broken stone deposited, spread, levelled in layers n.exc. 15cm thick watered and rammed to a true surface complete all as specified and as directed. |
| 17 | M&L 100 mm thick PCC 1:4:8 type D-2 using (40mm graded crushed stone aggregates) in sub base etc complete all as specified & directed |
| 18 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified. |
| 19 | M&L for pre-cast cement concrete block masonry made of PCC (1:3 :6) type C-1 using 20mm graded crushed stone aggregate with solid blocks exc.10 cm in width and setting in cement mortar (1:6) including demolition of work/concrete/stone boulder masonary built in cement mortar complete all as specified and as directed. |
| 20 | Taking down mud plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, in cement mortar any description complete all as specified. |
| 21 | M & L for 15mm thick rendering on fair faces of brickwork or concrete surfaces in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified. |
| 22 | M&L PCC (1:2:4) Type B-1 using 20 mm graded stone aggregate as in benching of manholes, Coping including forming centre channels half round or 1/4 section complete all as specified. |
| 23 | M & L precast RCC 1:2:4 Type B-1 set in CM 1:6 using 20mm graded crushed stone aggregate as in cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles complete all as specified and as directed. |
| 24 | Dismantling floor hearth tile flooring or wall tiling including cement mortar bedding (but not backing) and rubbish off the same out side the MD land complete all as specified and as directed. |
| 25 | M&L Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite completed all as specified and directed. |
| 26 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 27 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 28 | M&L for newly plaster surfaces of Wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm incl all necessary safety norms to the workers all as specified and directed. |
| 29 | M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and as directed. |
| 30 | S&F stainless steel of SS-304 grade of widht 150mm and height 150mm of 10mm thick fixed with epoxy glue on walls complete all as specified and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender