Tender For Preservation, Restoration & Revival Of Shri Kripa Rameshwar Temple Fateh Kadal Srinagar.(Adv. Cost Rs. 50.79 Lacs) (Incl Cost Of Material+Gst)
Tender Value
50.79 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
8 days left
EMD
1.01 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Preservation, Restoration & Revival Of Shri Kripa Rameshwar Temple Fateh Kadal Srinagar.(Adv. Cost Rs. 50.79 Lacs) (Incl Cost Of Material+Gst)
BOQ
| Sl. No. | Item Description |
| 1 | BOUNDARY WALL |
| 2 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth carriage upto 15 Kms by Mechanical Transport and 100 mtrs HL by Manual Labour and and as directed by Engineer-in-Charge.All kinds of soil : |
| 4 | P/L of dry stone soling duly hand packed including all carriages loading unloading complete job before laying of mud mat in trenches incl. all carriages of material involved & Head Load. |
| 5 | P/L in position cement concrete of specified grade excl. the cast of centering and shuttering: 1:4:8 (1 cement 4: coarse sand 8 graded stone crushed agg 40mm nominal size). |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 9 | Centring and shuttermg including strutting, propping etc.and removal of form for Foundations: footings, bases of columns etc. for mass concrete. |
| 10 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing and bamboo scaffolding: Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 11 | Providing/laying in position specified grade of cement concrete coping 50mm thick in M15 Grade including all carriages and costs. complete job. |
| 12 | 15mm thick cement plaster on the rough side of single or half brick walls of mix 1:6 ( 1 cement :6 fine sand) |
| 13 | Painting wall with oil bound washable excel of approved brand and manufacture to given an even shade. |
| 14 | LAWN DEVELOPMENT |
| 15 | Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) |
| 16 | Supplying and stacking at site dump manure from approved source including carriage complete (manure measured in stacks will be reduced by 8% for payment) Screened through sieve of I.S. designation 20 mm |
| 17 | Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately |
| 18 | Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) In rows 5 cm apart in either direction |
| 19 | Brick edging in full brick width and half brick depth including excavation,refilling and disposal of surplus earth lead upto 50 mtrs with common burnt clay non modular bricks |
| 20 | PATH DEVELOPMENT |
| 21 | Chequerred precast grey and dark cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Medium shade using 50% white cement and 50% ordinary cement. |
| 22 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) |
| 23 | Labour part for processing demolished cement concrete into recycled concrete aggregate (RCA) as soling . |
| 24 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 25 | 20mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 26 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.25mm thick with 12.5 mm nominal size stone aggregate. |
| 27 | Devri Stone Tile 25mm thick work for wall lining over to 30 to 40 mm thick bed of cement mortar 1:3 and cement slurry @3.3 KG per/sqm including pointing with curing complete including hacking of surfaces as directed by engineer in charge. |
| 28 | P/L of stone cornice 112mm (devri cornice) in cement mortar 1:6 including chipping and supports to adjust pointing with cement mortar 1:2 with an admixture of pigment matching the devri stone fine chiselled including all lifts and carriages upto the site. |
| 29 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 30 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 31 | MAIN COURTYARD |
| 32 | Dismantling dressed stone work ashlar face stone work, devri work,marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 33 | Providing and laying matte glazed vitrified floor tiles in different sizes thickness to be specified by EIC with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades laid on 20 mm thick cement mortar 1:4 including grouting the joints with white cement and matching pigments etc. complete |
| 34 | MAIN TEMPLE |
| 35 | Providing/fixing of Khatambandi Ceiling of ist Class Budloo Wood of specified pattern in ceilings etc. including, necessary frame work work of 2\\"x1.5\\" size ,with spacing of joists @2' c/c i/c cost of nails and 12mm thick commercial ply board frame in lining of Budloo wood underneath, including cornice of size 3\\"x3\\" of Budloo Wood complete .as per the directions of Engineer Incharge Paanch Murabah |
| 36 | French Spirit Polishing, Two or more coats on new works including a coat of wood filler. |
| 37 | Melamine Polish on wood work(one or more coat) |
| 38 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 500x500 mm |
| 39 | Providing and fixing glazed screen printed border tile 75mm wide having thickness 5mm, of approved quality &make, in all shades, design and prints, in dado, over 12mm thick bed of cement mortar 1:3 (1 Cement :3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm including pointing with white cement mixed with pigment of matching shade, all complete as approved by Engineer - in - Charge |
| 40 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.25mm thick with 12.5 mm nominal size stone aggregate. |
| 41 | Providing and Erecting double bamboo scaffolding (cup lock type) for repair work upto 40ft. height above ground level using 150 to 200 mm dia bamboo posts including for horizontal bracing binding with coir/jute ropes or nails and necessary support ,the scaffolding shall be properly aligned and firmly fixed in position to ensure safety during Construction, dismantling of scaffolding after completion of work is also included. |
| 42 | Providing and applying white cement based putty of specified thickness of approved brand and manufacture ovweer the plastered wall surface to prepare the surface even and smooth complete 2 mm thick . |
| 43 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 44 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: 13.57.3 Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 45 | P/F OF 10MM THICK PLYWOOD CEILING incl. FRAMEWORK 2\\"x1.5\\" section with MS screw of first class imported kail wood all complete job. |
| 46 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (incl.hold fast lugs or with dash fasteners ): Second class teak wood |
| 47 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Include Fixtures viz Handles,Towerbolts,Aldrop ,Hinges etc.) Second class teak wood |
| 48 | Providing and Fixing Plained Eaves Boarding 2nd Class Budloo 300x30MM (nominal Size): Temple |
| 49 | Providing and fixing of 12 MM thick T&G planks made of imported wood (New Zealand pine or equivalent) for roof soffits and ceiling on woodwork in false ceiling ,partitions and put up in position in budloo wood (ceiling joists) including required kail wood joists 2\\"x1.5\\" frame,cost of necessary cornice of required size,cost of nails/screws all complete as approved by engineer in charge including cost of material ,leads and lifts and carriages up to site of work complete . |
| 50 | Preparing of surface by way of removing old painting material by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches as per instructions of Site Engineer.ALLIED TEMPLE WOOD JAALI |
| 51 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats i/c primer/ordinary paint under coat. |
| 52 | Providing fixing testing & commisioning soil, waste and vent pipes IS 13592 & fittings (IS: 14735 ) suitable to rubber ring joints , which includes bends, T-ee, reducers,rubber ring, jointing, junctions, clean out plug , cowls, offsets, collar, M.S holder-bat clamps, access pieces, (P or S) trap of self cleansing design .etc. complete including jointing. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B 110 mm diameter |
| 53 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge 19.2.2.2 PN-16 pipe , 20mm OD(SDR-7.4) |
| 54 | P/fixing Bip Cock CP all complete. |
| 55 | Engaging Skilled Carpenter for repair of soffit and eves,door,window including consumables etc. |
| 56 | P/f LED Surface lights 12W i/c wiring,modular switch,plate.box all complete job. |
| 57 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed PVC Heavy duty Manhole Cover including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stoneaggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design.With common burnt clay (non modular) bricks of class designation 7.5 |
| 58 | Rough chiseling the available devri stones incl. moulding of corners as per the directions of Engineer Incharge and all costs involved complet |
| 59 | Providing and fixing 15cm wide 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gram/m2 |
| 60 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion, I/c required clamp,anchor,coupler,bends,cleaning eye,shoe bend,hooper with grating and solvent cement etc.(i) Single socketed pipes 110 mm diametre |
| 61 | Carriage of Material by MT for an avg. lead of 15KM & Head Load for an avg of 100mtrssand |
| 62 | Aggregate below 40mm |
| 63 | Bricks 25km by MT & Head load 100m |
| 64 | Carriage for Demolished Rubbish within 15km meters by Mechanical Transport and Head Load of 100 mtrs by Manual Labour as per direction of Engineer-incharge: Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender