Tender For Maintenance Of Padshahibagh Regulatory Gate On Padshshibagh Nallah And Construction/Installation Of Frp Gauge Plate.
Tender Value
6.29 Lakhs
Estimated cost
Bid Submission
17 Jul 2026
5 days left
EMD
12600
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Padshahibagh Regulatory Gate On Padshshibagh Nallah And Construction/Installation Of Frp Gauge Plate.
BOQ
| Sl. No. | Item Description |
| 1 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive. |
| 2 | Silt clearance from canals. Inclusive of initial lead and lift ( 50m & 1.5m respectively ) Wet |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 4 | Removing and re-fixing of existing sluicegate by lifting through truck-mounted hydraulic crane or any mechanical means, including disconnection and reconnection of operating mechanism, complete as directed by Engineer-in-Charge. (1.0m x 1.20m) |
| 5 | Repair to existing manually operated winch machine, including dismantling, rectification replacement of worn-out parts, welding machining wherever required, reassemble, lubrication/greasing, alignment, complete as directed by Engineer-in-Charge. (4.50 m) height. |
| 6 | Repair to existing manually operated winch machine, including dismantling, rectification replacement of worn-out parts, welding machining wherever required, reassemble, lubrication/greasing, alignment, complete as directed by Engineer-in-Charge Padshahibagh Head regulatory Gate3-panels machines. |
| 7 | Providing and fixing flat bottom rubber seal,including supply of seal,crilling holes,and fixing firmly to the gate frame using countersunk hex. head bolts with nuts and washers,complete in all respects (100x12mm) Gate size (4.50x1.00m)effective 0.75m |
| 8 | Padshahibagh Head regulatory Gate3-panels (4.0mx8.50m) (140x16mm) |
| 9 | Providing and fixing Teflon-cladded hollow side seal (Dia 30x70mm, 10mm thick),fixed on both sides of the gate using countersunk bolts |
| 10 | Providing and fixing Teflon-cladded hollow side seal (Dia 30x70mm, 10mm thick),fixed on both sides of the gate using countersunk bolts, Padshahibagh head regulatory Gate 3 panels (4.0mx8.50m) (140x10mm) |
| 11 | Supply, installation, and commissioning of manually driven Single winch machine assembly with threaded shaft for vertical operation of a 5kN gate, including winch base, connecting rod, threaded shaft, flanges, rain cover, and all necessary accessories, complete as per specifications and directions of the Engineer-in-Charge, inclusive of carriage and transportation up to site of work. |
| 12 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Riveted and bolted |
| 13 | Providing and fixing of required nut bolts as per requirement. |
| 14 | Supply /Installation/Placing/ Fixing of gauge plates of fibre glass reinforced plastic (FRP) 5mm thick sheet, very sturdy on both sides, gel coat finish composite material, sandwich with MS strip by contact moulding process, engraved moulded bandwidth and figures with computerized gauge marking with reflective radium pasting, including cost of angle iron 50x50x5, nuts and bolts and geyser bolts, welding/drilling of holes wherever required including incidental civil cost, all types of carriages up to site of work including necessary arrangements of fixing geyser bolts, boats, ladders complete jobm (one unit FRP gauge plate). |
| 15 | Carriage of material by mechanical transport including loading unloading and stacking from source to site of work. 20mm aggregate avg. 05 km. |
| 16 | Sand avg. 05 km. |
| 17 | Disposal of silt avg. upto 2 km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender