Tender For Repairs To Roof Treatment, Sunken Floor, Replacement Of Internal Water Supply Pipe Line And Sanitary Fittings In Certain Bldgs At T Le Line, Stn Hq, Mh/Mdc/Sho, Mes, Asc & Asri In Ramgarh Cantt In Ramgarh Cantt.
Tender Value
20 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
17 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramgarh → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Roof Treatment, Sunken Floor, Replacement Of Internal Water Supply Pipe Line And Sanitary Fittings In Certain Bldgs At T Le Line, Stn Hq, Mh/Mdc/Sho, Mes, Asc & Asri In Ramgarh Cantt In Ramgarh Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old brocken floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premices complete all as specified and directed. |
| 2 | M&L coloured ceramic glazed tiles 350 x250 x 7mm / 450 x 350 x 7 mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement complete all as specified and directed. |
| 3 | M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed. |
| 4 | M&L for 8-9mm thick coloured vitrified ceramic tiles of size in floors, not exceeding 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement to match over & including 20mm thick screed bed in CM 1:4 complete all as specified & directed. |
| 5 | All as per Item No 4 here in before but as in Skirting with 10mm thick rendering in CM 1:4 |
| 6 | Uprooting of tree, trunk / plants (n exc.30cm girth) from walls, roofs and slabs of any position and any location in the building including cutting of bricks or concrete work etc, in position not exceeding 1 sqm in area & up to full depth of roots and making good the surface with PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate complete all as specified and directed. |
| 7 | Demoliton of cement concrete in ground floor paving exc 15cm thickness ( above ground floors ) sunken floor etc complete all as specified and directed.. |
| 8 | M/L for PCC (1:5:10) type E2 using 40mm graded brick aggregate as in sunken portion, sub base,etc complete all as specified and directed at site. |
| 9 | S&F 50mm bore tubes light grade galvanised with all fittings laid in floor as in spout pipe, etc complete all as specified and directed. |
| 10 | Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm in sunken portion including cleaning of surfaces complete.after treatment the same shall be tested for leakage/seepage/dampness by ponding with water for 72 hours complete all as specified and directed. |
| 11 | M&L 50 micron thick Polythene film laid on a coat of bitumen primer @ 0.3 to 0.5 kg per sq min sunken floor etc complete all as specified and directed |
| 12 | Taking down complete existing treatment of roof/ parapet , Mud puska on roof /parrapet including plastering, brick tiles, stone slabs and leeping any thickness including removal of rubbish from site etccomplete all as specified and directed. . |
| 13 | M&L Brushing neat cement slurry (3 Kg of cement per Sqm) for bonding of old concrete surface to new concrete complete all as specified and directed. |
| 14 | M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) mixed with integral waterproofing chemical compound mixed in proportion 200 millilitre per 50 Kg cement as in padding, benching,Sunken portion etc on roof surface for corecting/making proper slope on roof, etc complete all as specified and directed. |
| 15 | M&L Rendering 10 mm thick in cement mortar 1:3 on concrete / brick surfaces with liquid water proofing compound @ 200 ml/50 kg per bag of cement or as per manufacturar instruction finished even and smooth without using extra cement over roof / sunken slab /wall complete all as specified and directed NOTE :(i) water proofing liquid will be measured and paid seperately . (ii) After the plaster has cured the roof shall be tested for water tightness by ponding with water for seven days for any seepage/ leakage etc. complete all as specified and directed. |
| 16 | Supply only liquid water proofing compound complete all as specified and directed. |
| 17 | M&L for Water proofing treatment on Non approachable / non accessible roof\\" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer all as specified and directed complete. (i) Applying approved bituminous based primer conforming to IS : 3384-1995 @ 0.3kg/Sqm to be applied on top surface of prepared surface till the surface is properly impregnated. (ii) Laying APP (Atactic polypropylene Polymer Modified preffabricated membrane) waterr proofing membrane of weight not less than 3 kg/sqm with minimum 100mm side overlap along the length from downward to upward completely sealed with torch application/hot blown lamps. (iii) Applying two cots of bituminous based aluminium paint @ 0.3 kg/Sqm complete all as specified and as directed. |
| 18 | M&L for Water proofing treatment on \\"Non approachable / non accessible roof\\" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer all as specified and directed complete (i) Applying approved bituminous based primer conforming to IS : 3384-1995 @ 0.3kg/Sqm to be applied on top surface of prepared surface till the surface is properly impregnated. (ii) Laying APP (Atactic polypropylene Polymer Modified preffabricated membrane) waterr proofing membrane of weight not less than 3 kg/sqm with minimum 100mm side overlap along the length from downward to upward completely sealed with torch application/hot blown lamps (iii) Applying two cots of bituminous based aluminium paint @ 0.3 kg/Sqm complete all as specified and as directed. |
| 19 | M&L ceramic cool tiles for roof with grey cement and no pigment 30cm x 30 cm x 8mm thick , over 15mm thick screed bed in CM 1:4, set jointed and pointed in neat cement slurry in floors complete all as specified and directed. |
| 20 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified & directed. |
| 21 | S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engineer-in-Charge. |
| 22 | S & F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. mild steel framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as fixing in the frame at site as per specification and drawing complete all as specified and as directed. |
| 23 | S&F butt hinges 100mm long medium weight cold rolled MS and fixed complete all as specified and as directed at site |
| 24 | S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and as directed |
| 25 | S & F Aluminium anodised handles of extruded section and fixed 150 mm long complete all as specified and as directed. |
| 26 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good,cutting not exceeding 10 cm girth complete all as specified and as directed |
| 27 | Taking up or down steel tubing and connections of 15 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed. |
| 28 | All as per item No 27 here in before but for 20 mm dia bore pipe |
| 29 | S&F for GI water tubing medium grade, ISI marked, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed. |
| 30 | All as per item No 29 here in before but for 20 mm dia |
| 31 | Refixing/re-laying for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)including all fitting as socket, elbow, nipple,union etc complete all as specified and directed .Note :G I Pipe obtained from item No27 here-in -before. |
| 32 | All as per item No 31 here in before but 20mm bore |
| 33 | S & F in repair for PVC connection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as specified and directed. |
| 34 | S&F in repair 15mm dia angle stop valves cast copper alloy faney type,chromium plated complete all as specified and directed |
| 35 | S & F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 36 | S & F in repair 15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 37 | S & F in repair, 15mm bore bib taps cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed |
| 38 | S & F in repairs, 15mm bore stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down,high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed. |
| 39 | S&F in repairs for shower rose chromium plated with or without swivel joints 125 mm dia complete all as specified and directed |
| 40 | S&F vitreous in repairs china squatting pan ORRISA Pattern of size 580x 440mm white with integral foot rest complete (excluding cistern and flush pipe) with provn of lime concrete including backing joints complete all as specified and directed at site. |
| 41 | S&F in repairs Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, sheet cover of white colour complete all as directed and specified. |
| 42 | S&F in repair for 10 ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed. |
| 43 | S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling complete all as specified and directed. |
| 44 | S&F in repair Vitreous China urinals, half stall bowl type (back or corner wall type) of size 465x355x265mm, complete including providing and fixing plugs,waste coupling, waste pipe, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe complete all as specified and directed. |
| 45 | S&F in repair stainless steel kitchen sink with drainage board 1 mm thick including bedding in cement mortor on to dwarf wall or including fixing centilever brackets over all size 915 mm x 460mm baw/size 410 mm x 330 mm x 160 m and including 38/40mm dia waiste pipe complete all as specified and directed |
| 46 | S&F in repairs15mm dia pillar tap cost copper alloy fancy type long body with capstan heads chromium plated screwed down high pressure with or without letered \\"Hot or Cold\\" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed |
| 47 | Supply and fix sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf12 cm wide with chromium plated bracket guard and railing 60 cm long etc complete all as specified and directed |
| 48 | S&F in repair brass chromium plated towel rail , 20 mm dia ,D-type 600 mm long between flanges fixed with and including chromium plated brass screw & wooden /plastic cleats complete set all as specified and directed. |
| 49 | S & F 600mm X 450 mm bevelled edge looking mirror of selected quality glass mounted on 6 mm thick Acbuilding board or commercial plywood and fixed to wooden plugs with CP brass screw and cup washers complete all as specified and directed. |
| 50 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing from site complete all as specified and as directed. |
| 51 | M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed. |
| 52 | S & F for 75 mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints laid in trenches or floors complete all as specified & directed. |
| 53 | M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed. |
| 54 | S&F PVC (SWR) bends 110 mm bore of any radius complete all as specified & directed. |
| 55 | S&F PVC (SWR) bends 75 mm bore of any radius complete all as specified & directed. |
| 56 | S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door complete all as specified & directed. |
| 57 | S&F PVC (SWR) junction single (singleT) equal or unequal 75mm bore provided with access door complete all as specified & directed. |
| 58 | S & F 110 mm bore PVC (SWR) vent cowl with rubber ring joints complete all as specified and directed. |
| 59 | S & F for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement with chromium plated grating with or without hole complete all as specified and directed. |
| 60 | S & F 110 mm dia PVC(SWR) WC connector with lip ring, complete all as specified. all as directed. |
| 61 | Dismantling PVC water exc 250 & not exc 500 Ltrs complete all specified and directed. |
| 62 | Dismantling PVC water exc 500 & not exc 1000 Ltrs complete all specified and directed. |
| 63 | S & F Rotational moulded polythene water storage tanks, double layered (Cylindrical vertical with closed top) of capacity 500 ltr, hoisted and fixed in position as in repair complete all specified and directed. |
| 64 | S & F Rotational moulded polythene water storage tanks, double layered (Cylindrical vertical with closed top) of capacity 1000 ltr, hoisted and fixed in position as in repair complete all specified and directed. |
| 65 | Disconnecting existing tanks Exc 250 & n exc 500 Ltr, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and re-fixing in position.(cleaning ,repairing, etc measured separately etc complete all specified and directed. |
| 66 | All as per item No 65 here in before but for Exc 500 & n exc 1000 Ltr |
| 67 | Cleaning and removing all scale and dirt ,etc from tanks Exc 250 & n exc 500 Ltr and from mouths of circulating pipes etc complete all as specified and directed. |
| 68 | All as per item No 67 here in before but for Exc 500 & n exc 1000 Ltr |
| 69 | S&Fin repair 20 mm dia ball valve, high pressure of PTMTwith epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 15 mm-142 gms/20 mm-210 gms/25 mm-455 gms/40mm-690gms in repairs, complete all as specified and directed. |
| 70 | Dismantling of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons, etc complete all as specified and directed.. |
| 71 | M&L Granite (of any type) work (table rubbed and polished) of any shade 18 to 20mm thick in cooking platform, steps, windowcills, etc over and incl 15mm thick cement screed base in CM 1:4 laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab incl rounding of slab etc as specified & directed. |
| 72 | Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out off MOD land etc complete all as specified and directed. |
| 73 | M&L for Brick work with sub class 'B' , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed. |
| 74 | Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 75 | M & L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) with using WPC (WPC shall be measured seperetly)on wall finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 76 | M & L for rendering 10 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 77 | Material & Labour for applying two coat of oil emulsion distemper on newly plastered surfaces of wall over a coat of primer over 1mm wall care putty including preparation complete all as specified and as directed |
| 78 | M&L for Preparation of old plastered or unplastered surfaces of ceiling and applying one coat of distemper to ceiling complete all as specified and directed |
| 79 | M & L washing, rubbing down and stopping of old decorated surfaces and applying two coat of oil bound distemper on walls etc, white or tinted applying by pump roller applicator complete all as specified and as directed. |
| 80 | M&L for preparing the new plastered surfaces of wall and applying Two coat of cement based paint over a coat of alkali resistant primer complete all as specified and as directed |
| 81 | M&L for repair and rendering 10mm thick in cm 1:3 on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs complete all as specified and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender