Tender For Special Repairs To Mettallurgy And Material Science Lab Building (Ndt Machineries & Equipments) (No P-199) At Arde, Pashan, Pune
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Jul 2026
18 days left
EMD
37000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Mettallurgy And Material Science Lab Building (Ndt Machineries & Equipments) (No P-199) At Arde, Pashan, Pune
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, floor, hearth or wall tiling 10mm to 25mm thick including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Material and Labour for 25mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with screed bed of CM 1:4 complete all as specified and directed. |
| 3 | Material and labour for kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on over 12 mm (average) thick cement mortar 1:3 as backing coat and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete all as specified and directed. |
| 4 | Providing and laying 40mm thick cement concrete flooring 1:2:4 (1 cement : manufactured sand derived from Recycled Concrete Aggregate (RCA) : graded stone aggregate Recycled Aggregate (RA)) as sub base in floor with 20mm nominal size stone aggregate finihsed with a floating coat of neat cement, including extra cement slurry etc complete all as specified and directed. |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 Metres lead complete all as specified and directed. |
| 6 | Material and labour for 12mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces of wall complete all as specified and directed |
| 7 | Material and Labour for 18 mm thick cement plaster in two coats under layer 12 mm thick cement plaster (CM) 1:5 and a top layer 6 mm thick cement plaster 1:3 finished rough with water proofing compound (WPC shall be measured and paid separately) complete all as specified and directed. |
| 8 | Material and labour for 6mm thick cement plaster (CM) 1:3 finished with a floating coat of neat cement and thick coat of lime wash on ceiling surfaces complete all as specified and directed |
| 9 | Supply only liquid water proofing compound complete all as specified and directed |
| 10 | Material and labour for Complete removal of existing treatment Cutting out cracks to V-section in existing plastered walls, cleaning out, wetting, grouting with suitable crack filling agent like Dr. Fixit Crack X or Dr Fixit Crack X Shrink Free or Dr Fixit Pidicrete URP with respect to the width of crack complete all as per manufacturers instruction complete all as specified and directed. |
| 11 | Material and labour for Distempering on walls with oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two coats) over and including water thinnable priming coat with cement primer complete all as specified and directed. |
| 12 | Material and labour for white washing three coat with lime in ceiling to give an even shade on newly plastered ceiling complete all as specified and directed |
| 13 | Material and labour for complete Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as specified and directed. |
| 14 | Material and labour for distempering on old work (two coats) with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved brand and manufacturer to give an even shade complete all as specified and directed. |
| 15 | Material and labour for Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete all as specified and directed. |
| 16 | Material and labour for applying priming coats with primer of approved brand and manufacture having low VOC (Volatile Organic Compound) content with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre complete all as specified and directed. |
| 17 | Material and labour for preparation of newly plastered wall surface and applying two coat (two coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @2.20 Kg/10Sqm) of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance of over one coat of acrylic water based exterior grade primer @ 0.9litre(undiluted)/10 sq mtrs diluted with water in 1:1 ratio as per manufacture's instruction and all coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed. |
| 18 | Material and Labour for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old wall surfaces complete all as specified and as directed by Engr in charge. |
| 19 | Material and labour for damp proof waterproofing treatment on external walls as per following procedure in old plastered surface complete all as specified and directed.(a) Pre Painting StepsSurface should be free from any loose paint, dust or grease. Growth of Fungus, Algae or moss should be removed by wire brushing and water. If the Underlying surface exhibits chalkiness, in spite of surface cleaning then use Asian Paints Smartcare Primero. For filling cracks up to 3mm use Asian Paints Crack Seal.* In case of dents and holes use Asian Paints Trucare wall putty suprema.(b) Paint Applicaton Process1 Coat of Smartcare Damproof (Undiluted)*1 stCoat of Apex Ultima Suprema (40% Dilution)*2ndCoat of Apex Ultima Suprema (40% Dilution) Complete all as specified as per manufacturer's instruction and Complete all as specified and directed. |
| 20 | Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 square metres and below including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead complete all as specified and directed. |
| 21 | Dismantling doors, windows and clerestory windows (steel or wood) shutter of area above 3 square metres including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead complete all as specified and directed. |
| 22 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be Powder coated (minimum thickness of powder coating 50 micron) smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 23 | Providing and fixing aluminium shutters of doors, windows and ventilators, powder coated aluminium (minimum thickness of powder coating 50 micron) including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 24 | Supply and fix in repairs Stainless steel wire guage (Grade-304) aperture 1.4mm and 0.50mm dia wire for fixing of window, ventilator etc. complete all as specified and as directed by Engineer-in-Charge. |
| 25 | Providing and fixing in repairs vertical Zebra Blinds for windows dual layer polyster roller blinds of 100mm wides of required colour and sheds and necessary fittings of approved make complete all as manufacturer instructions and as directed by Engineer-in-Charge. |
| 26 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (cost of aluminium snap beading shall be paid in basic item) with float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) complete all as specified and directed |
| 27 | Material and labour for pressed steel door frames (mild steel sheet 1.60mm) Profile \\"B\\" of size 105X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed. Pressed mild steel welded or rigidly fixed together by mechanical means, including MS pressed butt hinges 2.5mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. |
| 28 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to and above plinth level of filling of hollow pressed steel frame 1:3:6 (1 cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 20mm nominal size Recycled Concrete Aggregate (RCA) complete all as specified and directed. |
| 29 | Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters fixing with necessary screws and fittings complete all as specified and directed. |
| 30 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete all as specified and directed. |
| 31 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars, single angle etc. fixed to steel window including priming coat with approved steel primer complete all as specified and directed. |
| 32 | Providing and fixing 300x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as specified and directed. |
| 33 | Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete all as specified and directed. |
| 34 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. single rubber stopper complete all as specified and directed. |
| 35 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete 150x10 mm complete all as specified and directed. |
| 36 | Dismantling G.I. pipes 15 to 40mm dia bore including excavation and refilling trenches after taking out the pipes, manually / by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge complete all as specified and directed. |
| 37 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 15 mm nominal dia pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 Metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints concealed work, including cutting chases and making good the walls etc complete all as specified and directed by Engineer in Charge. |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 20 mm nominal dia Pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings this includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete all as specified and directed by Engineer in Charge. |
| 39 | Providing and fixing in repairs wash basin with C.I. brackets, 15 mm C.P pillar taps, 32 mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China wash basin size 630x450 mm with a single 15 mm C.P brass pillar tap complete all as specified and directed. |
| 40 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge complete all as specified and directed. |
| 41 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing oval shape 450x350mm (outer dimensions) complete all as specified and directed. |
| 42 | Providing and fixing 32 mm dia P.V.C. Flexible waste pipe for sink or wash basin including P.V.C. waste fittings complete all as specified and directed. |
| 43 | Taking down of existing stop cock of any type complete all as specified and directed. |
| 44 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 15 mm nominal dia complete all as specified and directed. |
| 45 | Providing and fixing in repairs gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal dia complete all as specified and directed. |
| 46 | Supply and fix unplasticised PVC connection pipe 15mm nominal bore with brass union 45CM long complete all as specified and directed |
| 47 | Providing and fixing in repairs PTMT grating 100mm nominal dia of approved quality and colour circular type complete all as specified and directed. |
| 48 | Material and labour in repairs for cast iron floor trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 49 | Demolishing brick work built in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 50 | Material and labour for Pre-cast Cement concrete block masonry type C-1, 1:3:6 (20mm graded aggregate) with solid blocks exc 10cm in width and setting in mortar CM 1:6 complete all as specified and directed. |
| 51 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed. |
| 52 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished machine cut granite stone slab colour black, cherry/ ruby red of area exc 0.50 Sqm for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete all as specified and directed. |
| 53 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble / granite / stone work, including necessary holes for pillar taps etc including moulding, rubbing and polishiing of cut edges etc complete all as specified and directed. |
| 54 | Material and labour for 20mm thick granite (of any type) work (Table rubbed and polished) in steps, jambs, pillars, windows cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite complete all as specified and directed. |
| 55 | Complete removal of existing Roof treatment in any layers including demolition of PCC in roofs unreinforced and disposal of debris to distance exc 250m and not exc 500m out of MoD land complete all as specified and directed. Note: i) All the dismantled debris are required to be removed from ARDE premises right after demolition so that process of user should not get disturbed. |
| 56 | Material and labour for PCC 1:2:4 (Type B0 using 12.5 mm graded crushed stone aggregate) (40mm thick avg) as in levelling course to match the undulations of roof and in coving, roof kerbs including benching etc including necessary formwork and finished rough surface complete all as specified and directed. |
| 57 | Material and labour for rendering 10 mm thick on fair faces of concrete surface in cement mortar 1:3 for receive the roof finishes with water proofing liquid. (WPL Shall be measured and paid separately) complete all as specified and directed. |
| 58 | Material and labour for applying water based polyurethane modified dispersion (single component, cold applied, non toxic, VOC complaint) in 03 coats including 01 coat of epoxy primer @ 0.15 Kg per Sqm followed by two coats of polyurethane coating with 1.5 Kg per sqm in two coats etc complete as per manufacturer specification complete including cleaning surfaces and filling the cracks with PU based primer and sealent complete all as specified and as directed by Garrison Engineer/Engr-in-Charge. Notes : 1. Properties of Polyurethane based chemical shall confirm to following Technical Parameters:- (i) Highly Elastic and shall have crack bridging ability of upto 3mm as per AS NZ 4548(ii) UV Resistance.(iii) Adhesion to concrete and shall resist 7 bars of hydrostatic pressure.(iv) Tensile strength should not less than 2.0 N/sq.mm for free film & 60 % solid content as per ASTM C 1250(v) Elongation should not less than 300% as per ASTM D2370(vi) Solid content by weight should not less than 60%.(vii) Air/water permeability BSEN 12390 AT 5 bar -72 hours should be NIL and minimum dry film thickness of water proofing membrane must be 1.0mm.(viii) Accelerated weathering (ASTM453) should Pass 1000 hours.(ix) Reaction to fire – non inflammable. 2. The work shall be executed through auth applicator of manufecturer only. Contarctor has to provide manufecturer test certificates for the above mentioned technical parameters and PVs.3. The conractor has to submit the guarntee for 10 Years against the water proofing treatment. 4. The rate quoted inclusive of filling the cracks with PU based primer and sealent and nothing extra shall be admissible. |
| 59 | Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrance with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. |
| 60 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 61 | Supply and Fix 110mm dia PVC ( SWR) Pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed by Engineer-in-Charge. |
| 62 | Supply and Fix 75mm dia PVC ( SWR) Pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed by Engineer-in-Charge. |
| 63 | Supply and fix 75 mm PVC (SWR) bends any radius complete all as specified and directed. |
| 64 | Supply and fix 75 mm PVC (SWR) bends any radius with access door complete all as specified and directed. |
| 65 | Supply and fix 110 mm dia PVC (SWR) bend any radius with access door complete all as specified and directed. |
| 66 | Material and labour for applying synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade two coats on new wooden surfaces under a coat of primer of approved brand and manufacturer complete all as specified and directed. |
| 67 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level complete all as specified and directed by Engineer-in-charge. |
| 68 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and directed. |
| 69 | Providing and laying plinth protection 50mm thick of cement concrete 1:3:6 type C1 using stone aggregate 40 mm nominal size including 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling, dressing and finishing the top smooth complete all as specified and directed. |
| 70 | Excavating holes more than 0.10 cum and upto 0.5 cum in soft loose soil including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, complete all as specified and directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil complete all as specified and directed. |
| 71 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1:3:6 (1 cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 20mm nominal size Recycled Concrete Aggregate (RCA). complete all as specified and directed. |
| 72 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 73 | Material and labour for Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. all as specified and directed. |
| 74 | Dismantling asbestos cement sheet in roofing including ridges, hips, valleys and gutters etc and stacking the material within 50 metres lead complete all as specified and directed. |
| 75 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete all as specified and directed. |
| 76 | Supplying and fixing rolling shutters in repairs of approved make, made or required size MS laths, interlocked together through their length and jointed together at the end by end locks, mounted on specially designed pipe shaft with bracktes, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS : 4454- Pat 1 and MS top cover of required thickness for rolling shutters 80x1.25mm MS laths with 1.25mm thick top cover complete all as specified and directed. |
| 77 | Material and labour for applying synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade two coats on new steel surfaces under a coat of primer of approved brand and manufacturer complete all as specified and directed. |
| 78 | Extra for providing mechanical device chain and crank operation for operating rolling shutters exceeding 10.00 Sqm and upto 16.80 Sqm in the area complete all as specified and directed. |
| 79 | Providing and fixing ball bearing for rolling shutters complete all as specified and directed. |
| 80 | Earth work in surface excavation in all kind of soil not exceeding 30cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m complete all as directed by Engineer-in-charge. |
| 81 | Material and labour for 100mm thick hardcore of stone aggregates of gauge exc. 63 mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 82 | Material and labour for PCC1:4:8 (1 cement : 4 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 8 graded stone aggregate 40mm nominal size Recycled Aggregate (RA) complete all as specified and directed. |
| 83 | Material and labour for 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc complete all as per the direction of Engineer-in-charge |
| 84 | Material and labour for providing gola 75x75 mm in cement concrete 1:2:4 type B1 using 10 mm and down gauge graded stone aggregate, including finishing with cement mortar 1:3 as per standard design complete all as specified and directed. |
| 85 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors, etc complete all as specified and directed. |
| 86 | Dismantling of the ceiling fan / exhaust fan and painting the same with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same complete all as specified and directed. |
| 87 | Material and labour for group 'C' wiring for light point / socket point / fan point / exhaust fan point / call bell point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable etc as required :-(a) One light point controlled by one, one way switch |
| 88 | (b) All as per item No 87 above but for one ceiling / Exhaust / Wall fan point controlled by one, one way switch |
| 89 | All as per item No 87 above but One 3 pin socket outlet, 5 amps, independent with cables 1.5 Sqmm size |
| 90 | All as per item No 87 above but One 3 pin socket outlet, 5 amps, on the same board with other switches with cables 1.5 Sqmm size |
| 91 | Material and labour for point wiring with 2.5 Sqmm FRLS PVC insulated multistranded copper conductor cables single core cable in surface / recessed medium class PVC conduit for one 3 pin socket outlet, 5/15 Amps, independent and earthing the point with 2.5 Sqmm FRLS PVC insulated, unsheated, copper conductor single core cable etc complete all as specified and directed. |
| 92 | Material and labour for point wiring with 4.0 Sqmm FRLS PVC insulated multistranded copper conductor cables single core cable in surface / recessed medium class PVC conduit for one 3 pin socket outlet, 5/15 Amps, independent and earthing the point with 4.0 Sqmm FRLS PVC insulated, unsheated, copper conductor single core cable etc complete all as specified and directed. |
| 93 | Supply and fix LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose at any height complete all as specified and directed. |
| 94 | Supply and fix LED lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose at any height complete all as specified and directed. |
| 95 | Supply and fixing LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistante complete with driver lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 96 | Supply and fixing of 32/40 mm dia x 2.0 meter long GI Pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV / LED street light fitting on pole / wall including bending the pipe to the required shape, 2 Nos 40mm x 3 mm flat iron clamps with nuts, bolts and washers painting the flat iron with primer and finish paint etc complete all as specified and directed. |
| 97 | Supply and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc complete all as specified and directed :-(a) 15/16 Amp switch, 1 module |
| 98 | (b) 6 Pin 15/16 A socket outlet |
| 99 | (c) 3 Pin 5/6 A socket outlet |
| 100 | Supply and fixing 5/6 Amps switch outlet on existing modular plate & switch box including connectinos but excluding modular plate etc complete all as specified and directed. |
| 101 | Supply and fixing 3 module (100 mm x 75 mm) size / modules, GI box alongwith modular base & cover plate for modular switches in recess etc complete all as specified and directed. |
| 102 | Supply and fixing 3 pin, 5A ceiling rose on the existing junction box / wooden block including connections etc as required complete all as specified and directed. |
| 103 | Supplying and fixing two module stepped type electronic fan regulator on the exising modular plate switch box including connections but excluding modular pate etc.complete all as specified and directed |
| 104 | Material and labour for wiring for circuit/submain wiring in repairs alongwith earth wire the 2x2.5 Sqmm + 1x2.5 Sqmm earth wire of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required complete all as specified and directed. |
| 105 | Material and labour for wiring for circuit/submain wiring in repairs alongwith earth wire the 2x4 Sqmm + 1x4 Sqmm earth wire of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required complete all as specified and directed. |
| 106 | Material and labour for wiring for circuit/submain wiring in repairs alongwith earth wire the 4x10 Sqmm + 2x6 Sqmm earth wire of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required complete all as specified and directed. |
| 107 | Supply and fixing in repairs 6 way (4+18), double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V on surface / recess complete with tinned copper bus bar, neutral bus bar earth bar din bar, inter connections, powder painted including earthing etc as required complete all as specified and directed |
| 108 | Providing and fixing in repairs 100A rating, 30 KA breaking capacity, FP MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubical panel, making connections etc as required complet all as specified and directed. |
| 109 | Supply and fixing in repairs 5 to 32 Amps rating , 240V, 10 KA \\"C\\" curve, miniature circuit breaker suitable for inductive load of single pole and neutral in the MCB DB complete with connections, testing and commissioining etc complete all as specified and directed |
| 110 | Supply and fixing in repairs 5 to 32 Amps rating , 240V, 10 KA \\"C\\" curve, miniature circuit breaker suitable for inductive load of single pole in the MCB DB complete with connections, testing and commissioining etc complete all as specified and directed |
| 111 | Supply and fixing in repairs 20/32A, 240V, SPN industrial type socket outlet, with 2 pole and earth, metal enclosed plug alongwith 20/32A \\"C\\" curve, SP, MCB, in sheet steel enclosure on surface or in recess with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc as required complete all as specified and directed. |
| 112 | Material and labour in repairs for earthing with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 M deep below ground level with top edge of the plate not less than 1.5 M below normal ground level connected to galvanised strip 32mm X 6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I connected to earthing test point including excavation / earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 chamber including necessary formwork / mould for fair and even surfaces, precast RCC 1:2:4 type B0 chamber cover slab GI funnel with GI watering pipe 20mm dia med grade, wire mesh, protection pipe 40mm bore charcoal and salt, GI Pipe light gde for earth lead upto 7.50 m long complete all as specified and directed by Engineer-in-Charge.Note : (i) GI strip beyond 7.5 Metre will be measured and paid separately. |
| 113 | Supply and fixing in repair earth connection from earth electrode with 6 SWG dia GI wire in 15mm dia GI pipe from earth electrode including connection with GI thimble excavation and re-filling as required complete all as specified and directed. |
| 114 | Supply & fix in repairs aluminium strip 25mm x 3.15mm complete with saddles and fixing screws for fitting the strip complete all as specified and directed. |
| 115 | Supply and fix single pointed air termination aluminium rod 12mm dia, 300mm long including dismantling taking out old air termination complete all as specified and directed. |
| 116 | Material and labour for epoxy base insulator of suitable size, 35mm height fixed on PCC blocks/ wall or MS angle/ Pipe / channel / on towers / on Galvalume sheet with and including bolt size 8mm dia, 19mm length, nuts and washers etc. complete all as specified and directed including dismantling and taking out old insulator. |
| 117 | Providing and laying GI tape 32mm x 6mm from earth electrode directly in ground as required complete all as specified and directed. |
| 118 | Supply and fixing earth pit indicator made out of MS sheet of 16 SWG of size 30 x 20 cm welded to angle iron of size 25 x 25 x 3 mm at a height 1m above ground including dismantling taking out old earth pit indicator complete all as specified and directed. |
| 119 | Supply and fixing in repair inspection boxes / test point boxes 250x150x100mm made out of 16 gauge MS sheet with top cover including provision of 2 Nos epoxy insulator with and including insulating PVC sheet for incoming and outgoing copper strip for proper insulation etc complete all as specified and directed by Engineer-in-charge. |
| 120 | Material and labour in repairs for PCC block of size 150 x 150 x 150mm in PCC (1:3:6) type C-1 with 20mm stone graded aggregate including necessary form / mould for fair and even surface, air termination rod / GI strip etc complete all as specified and directed by Engineer-in-charge. |
| 121 | Providng and fixing GI pipes of size 50mm dia nominal bore complete with GI fittings including trenching and refilling etc in any type of strata complete all as specified and directed. |
| 122 | Providing and fixing GI pipes of size 25mm dia nominal bore complete with GI fittings and clamps on wall surface / terris including cutting making good to the wall surface etc complete all as specified and directed. |
| 123 | Providing and fixing GI pipes of size 20mm dia nominal bore complete with GI fittings and clamps on wall surface / terris including cutting making good to the wall surface etc complete all as specified and directed. |
| 124 | Providing and fixing in repairs gun metal gate valve with C.I. wheel of approved quality (screwed end) of size 50 mm nominal dia complete all as specified and directed. |
| 125 | Providing and fixing in repairs ball valve (brass) of approved quality, high or low pressure with plastic floats complete for size 20 mm dia complete all as directed. |
| 126 | Taking down old unserviceable GI pipe of any make and size complete all as specified and directed. |
| 127 | Material and labour for constructing masonry chamber 90x90x100 cm inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve with CI surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete all as per standard design. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender