Tender For special Repair To Bldg No T-20 At Base C -I And Provn Of Hardstanding Between Btts, Para Packing And Sde Store At Base C -Iii Of 726 (I) Ad Pl Asc Under Ge 873 Ews
Tender Value
26.55 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
4 days left
EMD
54000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No T-20 At Base C -I And Provn Of Hardstanding Between Btts, Para Packing And Sde Store At Base C -Iii Of 726 (I) Ad Pl Asc Under Ge 873 Ews
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Jul-2026 | CHANGE IN BOQ ITEM | Other | 29-Jul-2026 |
| 2 | 29-Jul-2026 | Date Corrigendum | Date | 05-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface Excavation n.exc 30 cms deep and averaging 15 cms deep & getting out in hard/dense soil all as specified and as directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dense soil complete all as specified and directed |
| 3 | Removing excavated material to a distance beyond 50 m and upto a total distance of 250 m.and depositing where directed at level not exc 1.5m above the starting point all as specified and as directed. |
| 4 | Plain cement concrete (1:3:6), type C-2 (40mm graded crushed stone agg) as in foundation all as specified and shown on drawings. |
| 5 | M&L for 15mm thick plastering in CM 1:6 on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed. |
| 6 | M&L for providing cement cencrete types C-1 1:3:6 (20 mm agg) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 7 | Demolition of Cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness complete all specified and directed |
| 8 | M&L 50mm thick plain cement concrete 1:4:8 type D-2 40mm graded crushed stone aggregate) as in floor complete all as specified and as directed. |
| 9 | M&L for PCC 1:3:6 type C2 75mm thick using 40 mm graded stone aggregate as in plinth protection and Finishing cement concrete surface even and smooth with out using extra cement. |
| 10 | M&L for 75 mm thick PCC 1:4:8 type D2 (40mm graded aggregate) as in sub base complete all as specified and directed. |
| 11 | M&L for Pre-cast cement concrete block masonry with solid blocks, exc 10 cm in width and setting in cement mortor 1:4 complete (Type C-1 1:3:6) using 20mm graded crushed stone agg complete all as specified and directed |
| 12 | M & L for hardcore of broken stone boulders n exc. 63mm, deposited, spread and levelled in layers n exc. 150mm thick, watered and remmed to a true surface, complete all as specified |
| 13 | S & F butt hinges 100mm mild steel cold rolled, medium weight. |
| 14 | Supply & fix MS barrel tower bolt 150mm long stove enamelled black, complete all as specified. |
| 15 | S & F of Extruded aluminium alloy handles fabricated type anodised 125 mm size complete all as specified and directed. |
| 16 | S & F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor and fixed, complete all as specified and directed. |
| 17 | Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blanket any thickness including cover filllets complete all as specified and as directed. |
| 18 | M&L 9 mm thick prelaminated partical board, interior grade ,prelaminated one side with decorative choice lamination and other side balancing white lamination ,fixed with nails as in wall panelling complete all as specified and as directed. |
| 19 | M&L 9 mm thick prelaminated partical board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination ,fixed with nails as in ceiling works complete all as specified and as directed. |
| 20 | Dismantling timber framed in fillets, rails, posts rafters, purlines, etc under 40 Sq cm in section complete all as specified and as directed. |
| 21 | M&L second class softwood plain filllets, rectangular in section, clean swan, secured with nails exc 13 and n.exc 25 Sqcm complete all as specified and as directed. |
| 22 | M&L second class softwood plain fillets, rectangular in section, clean swan, secured with nails exc 3 and n.exc 6 Sqcm complete all as specified and as directed. |
| 23 | Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 SQMs each complete all as specified and as directed |
| 24 | Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each.(Steel/Wooden) |
| 25 | S & F plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed |
| 26 | S&F 40 mm thick 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particles board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed |
| 27 | Supply and fix steel window with side hung double shutters of gauzed shutter openable inside and glazed shutter openable outside with projecting type hinges , steel handles and steel peg stay with glazing bars dovetailed or welded and ventilator fixed type complete all as specified and as directed |
| 28 | M&L 4mm thick ordinary quality sheet glass and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 29 | S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed withstainless steel wire staples complete all as specified and as directed |
| 30 | Supply & fix MS sliding door bolts 250 mm long clip type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate and fixed, complete all as specified and directed. |
| 31 | S & F in repair Curtain rail Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc and fixed, complete all as specified and directed. |
| 32 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed |
| 33 | M & L Framed brecket of angals or tee with web and flanges cut to shape, drilled and countersunk for screw,including bending and wending angles as necessary gusset plates, riveting, etc n exc 10 kg each brackets conforming to Fe-290 Gde-E-165 Brackets over 10 kg each to be measured under Structural Steel) complete all as specified and directed. |
| 34 | M & L for Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. complete all as specified and directed. |
| 35 | S & F Steel work in tubular trusses including special shaped washer etc. completed using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 complete all as specified and directed. |
| 36 | Dismantling of plain of corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and as directed. |
| 37 | S&F Galvanised MS sheeting of 0.63mm thick corrugated ISI Marked and made of shakti with two cougation side laps and fixed with J hooks two framed work with PVC and steel washers as in roof & wall with Zinc coating of 275 complete all as specified and as directed. |
| 38 | .-Ditto- all as per item No-2(above) here-in-before but except sheets complete all as specified and directed. |
| 39 | S&F plain, galvanised MS sheeting of 0.63mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed. |
| 40 | Material & labour for three coats of white wash on newly plastered surfaces of walls including preparation of surface complete all as specified and directed. |
| 41 | M&L for painting to wooden surface of any description not other wise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on ply wood including preparation of surfaces etc complete all as specified and directed |
| 42 | Preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying two coat of synthetic enamel paint over one priming coat of red oxide complete all as specified and as directed |
| 43 | M &L for Preparation of old painted steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying two coat of synthetic enamel paint complete all as specified and as directed. |
| 44 | M&L for Sand filling/sand cushioning under floors or in foundations complete all as specified and directed. |
| 45 | M&L Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed. |
| 46 | M&L 20-25 mm thick machine cut Polished kota stone as in treads of staircase laying down and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over bedding layer of 15mm thick in CM 1:6 icluding screed bed complete all as specified and directed. |
| 47 | Taking down carefully copper/ aluminum point wiring incl light fitting & fixtures of any type and description for taking credit and making good disturbed surface of walls, floors, etc. complete all as specified and directed. |
| 48 | M&L for point wiring for one light or one fan or one bell point controlled by one switch with using 1.5 Sqmm single core FRLS PVC insulated unsheathed multi stranded copper conductor cable 1100V grade drawn through with incl PVC casing in capping (size of as required at site but not less than 20mm) with accessories like bends tees, junction boxes and terminal boxes for mounting fittings etc. fixed on recessed in wall or ceiling etc including 1.5 Sqmm single core FRLS PVC insulated but unsheathed multistrandard copper conductor cable 1100V grade as earth continuity wire connected to common earth dolly with incl suitable size switches /sockets PVC board ISI marked fire retardent as required at site complete all as specified and directed. |
| 49 | All as per Serial item No 48 above but point wiring for 3/ 5 pin switch socket outlet combination, 5 amps on same board complete all as specified and directed |
| 50 | All as per Serial item No 48 above but point wiring for 3/ 5 pin switch socket outlet combination, 5 amps on independent board complete all as specified and directed |
| 51 | All as per Serial item No 48 above but point wiring with using 2.5 sq.mm (nominal area) copper PVC insulated unsheathed stranded copper conductor incl same size continuous earth wire on independent board for one 5/6 pin switch socket outlet combination, 5 &15 amps (independent) complete all as specified and directed. |
| 52 | S & F switch piano type 230 volts, 5 Amps, single pole |
| 53 | S & F Socket out let 2 in 1, 3 pin, 5 Amps flush type 230 volts |
| 54 | S & F switch Socket out let combination 2 in 1, 3 pin, 5 Amps flush type 230 volts |
| 55 | S & F switch Socket out let combination 2 in 1, 6/5 pin, 5 &15 Amps flush type 230 volts |
| 56 | S & F ceiling rose surface bakelite, three terminals |
| 57 | S&F angle type Lamp holder, PVC/Polycarbonate with back plate complete all as specified & directed. |
| 58 | M & L for in replacement of sub main wiring using two single core FRLS PVC insulated, unsheathed stranded copper conductor cable of size 4 Sq.mm of 1100 Volts voltage rating drawn through and including PVC casing caping of size not less than 25mm with standard accessories, along-with one run of FRLS PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4.0 Sq.mm as earth continuity conductor complete all as specified and directed.Note : Two run of single core FRLS PVC cable with one run of earth conductor and conduit shall be measured as one unit. |
| 59 | Supply, fixing, connecting and testing sheet metal enclosures double door type for using MCBs suitable for single pole and neutral, 8 way with having copper bus bars suitable for 200 amps rating including taking down old unserviceable one complete all as specified & as directed |
| 60 | S & F in replacement MCB single pole & neutral (SP&N), 16 to 32 Amps, 240 volts, 10KA, ‘C’ series, with proper size lugs and connections complete all as specified & as directed |
| 61 | S & F in replacement MCB single pole (SP) 6 to 32 Amps, 240 volts, 10KA, ‘B’ series, with proper size lugs and connections complete all as specified & as directed |
| 62 | S & F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10/12 watt 220 V AC Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square shape, Beam Angle 120° including connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 63 | S & F in replacement Surface and wall mounted high efficacy 1x20 watt LED LED lighting fixture with extruded polycarbonate, Beam Angle 120° environmental friendly complete with all accessories internally pre wired and including connection up with twin core flexible copper conductior cable complete all as specified and directed |
| 64 | S & F in replacement LED 10 watt inverter polycarbonate channel batten , Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours suitable for 180 volt to 250 AC volt, complete all as specified and directed |
| 65 | S & F in replacement LED light fitting 1x9W/1X10W bulkhead luminaires including LED light holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed |
| 66 | S & F in replacement for outdoor type IP66, Energy saving LED street light fitting 30 Watt 230 V AC with PDC Aluminium body & Secondary optical lens for superior light distribution. Efficacy >100 Lm/W. with street light bracket complete all as specified and directed. |
| 67 | S& F in replacement steel body 300 mm sweep exhaust fan , heavy duty 230 volt complete all as specified and directed |
| 68 | S& F in replacement 500 ltr capacity humam water heating system made of 304 grade stainless steel boiler tank incl water funnel, exhaust air Vent Pipe, drain valve, stands for hamam, burner, diesel/kerosene tank 10 ltr with fuel pipe connecting to burner, Air blower motor 230 V , boiler Inner sheet made of 10 SWG 304 grade stainless steel sheet and outer sheet shall be made of 16 SWG . Glass wool insulatiuon of 25mm thickness to be provided between outer and inner sheet. 100mm dia MS pipes is to be be fitted in centre , One input water pipe , One over flow pipe, two output hot water connections with bib taps to be provided. External steel surface are to be painted with two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 69 | M & L for maintenance free GI earthing Electrode 2 mtr length shall be based on ready capsule type, Pipe-in-Cage technology concept in which, One Galvanized hollow pipe (Electrode) 50 mm dia filled with a specially developed earth enhancement material (EEM) made up of Conductive Cement, Graphite carbon powder, Sodium montmorillonite/ Sodium Bentonite Powder, Hydrous aluminum silicate etc. to reduce earth resistivity, 50kg Chemical , GI earthing Electrode buried directly in ground vertically to a depth not less than 2.0 meter below normal ground level and connected by means of galvanized bolts, nuts and washers with including necessary earth work and RCC moulded earth pit with cover, 15 mm dia pipe with watering funnel and GI earth wire 4.0 mm dia upto 7.5 RM connecting to MCB DB complete all as specified and directed and taking out old unserviceable earthing of any position complete all as specified and directed |
| 70 | Deduct Schedule of Credit of as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 05, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender