Tender For Furniture And Other Items For New Court Building At Nanded , Tal. Dist -Nanded
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Jul 2026
3 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nanded → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Furniture And Other Items For New Court Building At Nanded , Tal. Dist -Nanded
BOQ
| Sl. No. | Item Description |
| 1 | Part A -Furniture Work |
| 2 | 1500LX600DX710:1350 H , TOP SIZE OF MAIN TABLE WITH SIDE RUNNER 900LX450DX750H ,PEDESTRAL UNIT BELLOW TABLE SIZE 390LX460DX690H COLOR - BODY -MUNSHELL GRAY-TOP-CLASSIC PLANKED WALNUT |
| 3 | 1500LX600DX750 H , TOP SIZE OF MAIN TABLE WITH SIDE RUNNER 900LX450DX750H PEDESTRAL UNIT BELLOW TABLE SIZE 390LX460DX690H COLOR - BODY -MUNSHELL GRAY TOP-CLASSIC PLANKED WALNUT |
| 4 | 1200LX600D TOP SIZE OF MAIN TABLE WITH 750LX450D SIDE RUNNER WITH PARTITION -450H RUNNER COLOR - BODY-MUNSHELL GRAY TOP- CLASSIC PLANKED WALNUT PARTITION -FABRIC -M.GRAY) |
| 5 | CUPBOARD 916WX486DX2400H Height mentioned excluding leveler height of 8 mm.TYPE OF FUCTION:welded Top,side,bottom,Doors Made of 0.9 mm thk. CRCA sheet (Grade:IS513) HANDLE:Zink Alloy Die Cast Handle With buff finish Lock : 3 Way Locking with shooting Bolt. Coated with Epoxy Polyster powder to DFt 60-80 Microns(+/-5 Micron) |
| 6 | CUPBOARD WITH LOCKER-VAULT 4D (STD) 380Wx450Dx1855H,height mentioned excluding leveler height of 15 mm. CONSTRUCTION: COMPLETE KNOCKDOWN. Top, Side,Back Made of 0.6 mm Thk. CRCA sheet (IS513:Grade -CR2) Shelves,bottom,& doors made of 0.8 mm thk. CRCA sheet (IS513:grade-CR2) All other components are mde of 0.8 mm thk. CRCA sheet(IS 513 :Grade-CR2)Handle: Plastic Handle concealed type Lock: Cam lock with lever.Finish :coated with epoxy polyster powder to DFT 60-80 Microns/(+/-5 micron) |
| 7 | RACK-GALVIN (APO) 1200WX600DX2400H CONSTRUCTION:COMPLETE KNOCKDOWN Slotted angle 40x40 Made of ms sheet of 2mm thk (Grade:IS2062)Shelves made of 0.8 mm thk. CRCA Sheet (Grade:IS513) Stiffner made of 0.6 mm thk. CRCA. Shelves : 5 Nos Coated with Epoxy polyster powder to DFT 60-80 Microns(+/-5 micron) |
| 8 | Wooden Baby Crib / SWING @ 1200L X 600D X 900HProviding and supplying Solid Wooden Baby Crib/Cot of size 1200Lx600Dx900H with slatted safety rails and swivel castors.Frame & Material:The main structural frame, including the solid corner posts, top rails, and bottom stretchers, is constructed from premium, seasoned, and chemically treated solid wood (such as Rubberwood, Pine, or Beech wood) to ensure long-term durability and structural integrity. The entire wooden structure is sanded completely smooth with all exposed edges and corners ergonomically rounded off for strict child safety. All wooden components are finished with a premium, non-toxic, lead-free, and child-safe clear varnish or Polyurethane (PU) polish in a polished reddish-brown/mahogany shade.Side Panels & Guardrails:The side safety panels feature a traditional slatted design constructed from solid wood vertical spindles. The spacing between the vertical slats is strictly maintained to adhere to standard pediatric safety guidelines (typically less than 60mm gap) to prevent accidental entrapment. The front side panel incorporates a horizontal median rail, reinforcing the structure and potentially supporting a drop-side or fold-down access mechanism for caregivers.Head Board & Foot Board:Both the headboard and footboard feature a decorative, gently curved top rail. They are constructed with a robust solid wood outer frame housing matching vertical wooden slats, ensuring 360-degree visibility of the infant and promoting optimal airflow throughout the cot.Bed Base (Mattress Support):The cot is equipped with a sturdy, flat inner bed base (either a solid composite board or a reinforced slatted wooden frame) designed to securely hold a standard pediatric mattress.Understructure & Mobility:The four main solid wood corner posts extend downward to serve as the foundational legs of the crib. A horizontal wooden stretcher runs parallel to the floor between the legs to provide enhanced lateral stability to the overall framework. To allow for effortless relocation and mobility across ward or room floors, each of the four legs is securely fitted with a heavy-duty, multi-directional twin-wheel nylon swivel castor. |
| 9 | Modern 3-Seater Leatherette Sofa with Wooden Accent Frame @ 2100W X 850D X 850HProviding and supplying Modern 3-Seater Sofa featuring a distinctive exposed solid wood outer frame, premium dark grey leatherette upholstery, and loose back cushions.Frame & Woodwork: The primary inner structural frame is constructed from premium, chemically treated, and termite-proof solid wood and commercial plywood. The sofa features a prominent, continuous outer accent frame made of solid hardwood (such as Teak or Oak) that outlines the base, side panels, and front faces of the armrests. The exposed wooden elements are sanded completely smooth and finished with a clear/natural Melamine or Polyurethane (PU) protective polish to highlight the natural wood grain. The sofa is elevated on short, matching solid wood legs.Seat & Suspension: The seating platform utilizes a reinforced zigzag (no-sag) steel spring and heavy-duty nylon webbing suspension system. The seat comprises a thick, high-resilience Polyurethane (PU) foam block (minimum density of 40 kg/m³) wrapped in poly-dacron fiber. It is designed as a tight-seat configuration with a central stitched seam, ensuring firm seating comfort and long-term shape retention.Backrest & Armrests: The backrest is composed of 3 nos. of distinct, rectangular loose cushion pillows. These pillows are generously filled with a high-quality blend of poly-fill fiber and foam for ergonomic plushness and lumbar support. The armrests feature a modern boxed, track-arm design, thickly padded on the interior resting surfaces and sharply framed by the exposed wood on the exterior.Upholstery: The seat pan, backrest pillows, inner armrests, and exterior side panels (nested tightly within the wooden frame) are fully upholstered in premium, heavy-duty commercial-grade dark grey/charcoal leatherette (PU Leather). All upholstery features refined, heavy-duty structural double-stitching for tear resistance and a sleek aesthetic.Base Hardware: The bottom of each wooden leg is fitted with concealed anti-skid nylon glides or high-density felt pads to ensure stability and protect floor surfaces from scratching. |
| 10 | Wooden Chair : All Structure In Solid Teawood, Finish With Asian Company make Wood Melamine Spray Polish with 02-03 Coats , Wooden Chair Size : 595mm Width x 600mm Depth x 965mm Height, Seat Size : 455mm width x 475mm Depth Back 505mm High From Seat, front Legs : 45mm x 34mm thick , Back Legs 42mm x 24mm, Handrest : 68 mm x 30 mm , Side & Front & Back Bottom teakwood Support 65mm x 22mm , Back Rest Vertical Balusters : 22mm x 16mm with 08nos Qty. All Polish Color & Finish As directed by Engineer incharge. |
| 11 | Staff Chair : All Structure In Solid Teawood, Finish With Asian Company make Wood Melamine Spray Polish with 02-03 Coats Staff Chair Size : 520mm Width x 600mm Depth x 965mm Height, Seat Size : 465mm width x 470mm DepthBack 505mm High From Seat, front Legs : 65mm x 32mm thick ,Back Legs 30mm x 30mm, Handrest : 68 mm x 30 mm , Side & Front & Back Bottom teakwood Support 62mm x 22mm , Side Rail : 20mm x 20mm, Back Rest Balusters : 25mm x 15mm with 08nos Qty.All Polish colour & Finish as directed by Engineer incharge |
| 12 | Classic Spindle Back Dining / Café Chair (White Finish) @ 480W X 520D X 800H Providing and supplying Classic Spindle Back (Windsor style) Dining/Café Chair featuring a contoured saddle seat and a solid matte white finish.Material & Frame Construction: The entire structural frame, including the seat, legs, spindles, and top rail, is constructed from premium, seasoned, and chemically treated solid hardwood (such as Beechwood or berwood) to ensure high durability and resistance to warping. All components are precision-machined and securely joined using high-strength mortise-and-tenon construction.Seat Assembly: Features a solid wooden seat pan (approx. 20-25mm thick). The top surface of the seat is ergonomically scooped/contoured into a subtle saddle shape to provide optimal seating comfort without the requirement of additional upholstery.Backrest Assembly: The backrest utilizes a traditional spindle-back design. It features a continuously curved, solid wood top crest rail that provides ergonomic mid-back support. The top rail is structurally supported by vertically aligned, gently tapered cylindrical wooden spindles firmly anchored into the seat pan.Legs & Base: The chair is supported by four distinctly tapered, cylindrical solid wood legs. The legs are pitched/splayed outwards at a calculated angle from the seat base to ensure a wide center of gravity and maximum anti-tip stability.Finish: All exposed wooden surfaces are sanded completely smooth with no sharp edges. The entire chair is finished with a premium quality, multi-coat matte white Duco paint or Polyurethane (PU) coating. The finish acts as a durable, scratch-resistant, and easy-to-sanitize protective seal.Floor Protection: The bottom of each tapered leg is securely fitted with a concealed PVC/nylon anti-skid glide or high-density felt pad to ensure stability, dampen noise, and protect floor surfaces from scratching during movement. |
| 13 | Premium High Back Executive Office Chair @ 750W X 750D X 1150-1250H Providing and supplying Premium High Back Executive Office Chair fully upholstered in leatherette with pneumatic height adjustment and swivel base.Seat, Backrest & Armrests: Constructed from a minimum 12mm thick molded plywood shell, cushioned with high-resilience PU foam (Seat: 45 kg/m³, Back: 32 kg/m³). Features an integrated pillow-top head support and continuous, flared padded armrests. The entire upper unit is fully upholstered in premium tan/brown leatherette.Mechanism: Equipped with a heavy-duty metallic tilt mechanism featuring upright locking and tilt-tension adjustment. Seat height adjustability is powered by a BIFMA-approved pneumatic gas lift cylinder.Base & Mobility: Supported by a heavy-duty, 5-prong polished die-cast aluminum star base. Fitted with 5 nos. of 50mm heavy-duty twin-wheel nylon swivel castors for smooth, 360-degree mobility. |
| 14 | Premium Executive Mid Back Office Chair with Accent Frame @ 680W X 680D X 1050-1150HProviding and supplying Premium Executive Office Chair fully upholstered in leatherette, featuring a continuous dark accent frame, pneumatic height adjustment, and a polished swivel base.Seat, Backrest & Armrests: Constructed with a high-density PU foam core. The chair features a distinctive dark, continuous outer border frame that seamlessly integrates the contoured backrest, seat pan, and closed padded armrests. The inner cushioning features a gathered/ruched design and is fully upholstered in premium tan/brown leatherette.Mechanism: Equipped with a heavy-duty, multi-functional metallic tilt mechanism featuring multiple locking positions, lever controls, and a central tilt-tension adjustment knob. Seat height adjustability is powered by a standard BIFMA-approved pneumatic gas lift cylinder.Base & Mobility: Supported by a premium 5-prong polished chrome/die-cast aluminum star base. Fitted with 5 nos. of premium heavy-duty twin-wheel swivel castors featuring metallic accent hubs for smooth, 360-degree mobility. |
| 15 | Premium high-back executive chair designed for comfort and long working hours. Upholstered with high-density cushioning and ergonomic contouring. Adjustable, smooth, and durable, Ergonomically contoured design for full back and lumbar support. Inner structure made from injection-molded polypropylene frame or plywood base. Upholstered with high-density molded foam (45 ±5 kg/m³). Covered with PU leatherette / fabric upholstery — soft touch, easy to clean.Integrated headrest for neck and shoulder support. Material: Die-cast aluminum / heavy-duty chrome plated metal base (5-star). Castors: Twin-wheel nylon castors for smooth, noise-free |
| 16 | Premium Mid-back executive chair designed for comfort and long working hours. Upholstered with high-density cushioning and ergonomic contouring. Adjustable, smooth, and durable, Ergonomically contoured design for full back and lumbar support. Inner structure made from injection-molded polypropylene frame or plywood base. Upholstered with high-density molded foam (45 ±5 kg/m³). Covered with PU leatherette / fabric upholstery — soft touch, easy to clean.Integrated headrest for neck and shoulder support. Material: Die-cast aluminum / heavy-duty chrome plated metal base (5-star). Castors: Twin-wheel nylon castors for smooth, noise-free |
| 17 | Executive Cantilever Visitor Chair (Tan Brown) @ 600W X 600D X 900HProviding and supplying Executive Cantilever Visitor Chair fully upholstered in tan brown leatherette, featuring a chrome-plated tubular metal frame and padded armrests.Seat & Backrest: Constructed with a high-resilience PU foam core mounted on an ergonomically contoured molded plywood inner shell. The seat pan and mid-height backrest are fully upholstered in premium tan/cognac brown leatherette featuring a smooth, clean finish.Frame & Base: Supported by a heavy-duty continuous cantilever (sled) base constructed from thick Mild Steel (MS) tubular pipe. The entire metal understructure and frame are finished with a premium, high-micron polished chrome plating for rust resistance and durability. The bottom of the sled frame is fitted with nylon/plastic anti-skid glides to protect floor surfaces.Armrests: The chrome tubular frame extends upwards and curves horizontally to form fixed armrests. The resting surfaces of the armrests are fitted with securely mounted, black Polyurethane (PU) or thick padded arm caps to provide comfortable support and contrast against the tan upholstery. |
| 18 | Wooden Coat Stand Size : Overall Height: 1400 mm, Base Size: 400 mm × 400 mm Top Box 300mm (L)x 250 mm (D) x 80 mm (H).All structure in good quality indian teakwood finish with melamine polish,polish colour & finishes as per selection ( Finishes Ex. Glossy,Semi matt finish) (Colour Ex.Natural Teak,Walnut, Rosewood,Dark Walnut.etc) |
| 19 | Single Metal Bed with Mattress @ 2000L X 900D X 450HProviding and supplying Single Metal Bed of Size 2000Lx900Dx450H (Headboard Height approx. 950mm) complete with mattress and pillow.Understructure & Frame: The main bed frame and legs are constructed from heavy-duty Mild Steel (MS) square tubular pipes of size 40 x 40mm and rectangular tubes of size 50 x 25mm with a minimum wall thickness of 1.2mm. All joints are seamlessly welded for structural rigidity. The bottom of the legs are fitted with heavy-duty PVC/nylon end caps or buffers to prevent floor scratching and provide anti-skid stability. All metal components undergo a standard 7-tank anti-rust chemical treatment process and are finished with a durable matte black epoxy powder coating (minimum 50 Microns DFT).Headboard & Footboard: The headboard extends upwards and features a minimalist, open-slat design constructed using multiple horizontal MS tubes firmly welded between the main vertical square posts. The footboard follows a matching, lower-profile design with dual horizontal tubular rails to keep the mattress securely in place. Both panels are fully integrated into the main frame and finished in the matching matte black powder coat.Bed Base: The mattress supporting base is constructed using a sturdy, flat 18mm thick commercial plywood or pre-laminated particle board panel (with visible wood-grain finished edges). The board rests securely on horizontal MS stiffeners and support ledges welded to the inner side of the main bed frame to ensure even weight distribution.Mattress & Accessories: The bed comes inclusive of a standard single-sized mattress (approx. 100mm / 4-inch thickness) comprising a high-density PU foam or rubberized coir core. The mattress is fully upholstered in a durable, quilted red fabric featuring a subtle floral or geometric pattern. A standard rectangular white sleeping pillow with synthetic fill is also provided. |
| 20 | MESH CHAR HIGH BACK High MESH CHAR HIGH BACK High-Back Ergonomic Executive Office Chair with Headrest, Model: Mesh-Back & Fabric Seat All Dimension of Chair Overall Height: 1150–1250 mm (adjustable), Seat Height: 450–550 mm (pneumatic adjustment) High-back design with integrated lumbar curvature, Breathable mesh upholstery for ventilation, Frame material: Reinforced Polypropylene (PP) or Glass-Filled Nylon, integrated sleek loop-style armrests, Heavy-duty moulded PP, Fixed-type (non-adjustable) 50 mm twin-wheel castors, Nylon with smooth-rolling mechanism, Suitable for tile/carpeted floors |
| 21 | MESH CHAR MID Back Ergonomic Executive Office Chair with Headrest, Model: Mesh-Back & Fabric Seat All Dimension of Chair Overall Height: 950-1050mm (adjustable), Seat Height: 450–550 mm (pneumatic adjustment) High-back design with integrated lumbar curvature, Breathable mesh upholstery for ventilation, Frame material: Reinforced Polypropylene (PP) or Glass-Filled Nylon, integrated sleek loop-style armrests, Heavy-duty moulded PP, Fixed-type (non-adjustable) 50 mm twin-wheel castors, Nylon with smooth-rolling mechanism, Suitable for tile/carpeted floors |
| 22 | Teakwood Round Wooden SideTable, Overall Height: 450 mm (Top Dia) x 300 mm (Bottom Dia) x 550 mm Ht, Elegant round wooden table with curved legs and lower storage/display shelf. Compact, stylish, and suitable for use as a side, corner, or coffee table. All Structure in Good Quality Indian Teakwood Finish with Melamine polish, Polish Color & Finishes As per selection (Finishes Ex. Glossy, Semi Matt, Matt Finish) (Color Ex. Natural Teak, Walnut, Rosewood, Dark |
| 23 | Adjustable Hospital Bed @ 2100L X 900D X 600HProviding and supplying Adjustable Hospital Bed of Size 2100Lx900Dx600H with mechanical crank and swivel castors.Understructure: - The main frame is made of Rectangular tube of size 50 x 25mm made out of MS with a thickness of 1.6 mm. The legs are made of tubular MS pipe with a thickness of 1.2 mm. The understructure includes a horizontal utility shelf welded at the bottom made of MS wire mesh and tubular frame for patient storage. The legs are fitted with four heavy-duty swivel castors to allow for complete mobility of the complete structure. All Metal components to undergo 7 tank treatment process and should be epoxy powder coated to the thickness of minimum 50 Microns DFT.Side Rails: - The side rails are collapsible, drop-down type made of heavy-duty MS tubing. All exposed ends are sealed with PVC caps. The overall length covers the required safety area of the bed. The side rails have vertical support bars running for the required length to ensure patient safety and add rigidity to the structure.Head Board: - The head board is made up of injection-molded ABS plastic featuring a dual-tone white and light blue design. All edges are smoothly contoured for hygiene and safety. The head board is completely detachable with a drop-in slot mechanism for quick removal during emergencies.Foot Board: - The foot board is made up of injection-molded ABS plastic featuring a dual-tone white and light blue design. All edges are smoothly contoured. The foot board houses the foldable mechanical crank handle mechanism used to elevate the backrest of the bed.Bed Base: - The Bed Base is made up of 1.2mm thick CRCA MS perforated sheet, divided into sections. The top is supported by horizontal MS stiffeners and allows the backrest to be manually elevated using the crank mechanism for a semi-fowler seating position. |
| 24 | Single Seater Auditorium Chair @ 580W X 750D X 1000H Providing and fixing Single Seater Auditorium/Cinema Chair of overall dimensions 580mm Width (center-to-center) x 750mm Depth (with seat open) x 1000mm Height, featuring a floor-mounted pedestal, contoured backrest, and upholstered side panels.Understructure & Mounting:The chair is supported by a heavy-duty central pedestal/leg constructed from Mild Steel (MS) tubular pipe/sheet with a minimum thickness of 1.6mm. The central leg terminates in a flat, rectangular MS base plate equipped with pre-drilled holes for secure structural fixing to the floor using heavy-duty anchor fasteners. All exposed MS structural components (specifically the floor-mounting stand) undergo a standard 7-tank anti-rust treatment process and are finished with black epoxy powder coating to a minimum thickness of 50 Microns DFT.Seat Assembly:The seat assembly measures approximately 480mm in depth and features a minimum width of 480mm between armrests. The seat cushion is constructed from high-resilience, cold-cured molded Polyurethane (PU) foam with a minimum density of 50 kg/m³ to ensure long-term shape retention and comfort. The foam is mounted over a rigid inner core (thick molded plywood or MS tubular frame). The entire seat unit is fully upholstered in premium, heavy-duty commercial-grade red fabric. The seat incorporates a standard auto tip-up mechanism (gravity or spring-loaded) to ensure the seat folds up automatically when vacated, reducing the overall depth for maximum aisle clearance.Backrest Assembly:The high-backrest extends to an overall height of 1000mm from the floor level and is ergonomically contoured to provide optimal lumbar and shoulder support. It is constructed from cold-cured molded PU foam (minimum density 45 kg/m³) over a curved inner structural shell. The backrest features distinct structural stitching and paneling details to maintain fabric tension and enhance aesthetics. It is fully upholstered in matching premium red fabric.Side Panels and Armrests:The chair features closed side panels that extend towards the floor, maintaining an overall center-to-center width of 580mm per seat. The panels are constructed from thick commercial board/plywood, padded, and fully upholstered in the matching red fabric to integrate seamlessly with the seat and back. The top of each side panel is fitted with a durable, flat, black Polyurethane (PU) or scratch-resistant molded polymer armrest cap, designed for heavy-traffic public use and easy maintenance. |
| 25 | Mesh Back Visitor Chair with Metal Frame @ 600W X 600D X 900H.Providing and supplying Mesh Back Visitor/Guest Chair featuring a 4-leg tubular metal frame, upholstered seat, and fixed loop armrests.Understructure & Frame: The chair is supported by a sturdy, 4-legged frame constructed from heavy-duty Mild Steel (MS) or Aluminum round tubular pipe with a minimum wall thickness of 1.6mm. The entire metal frame is finished with a premium, high-micron polished chrome plating (or silver epoxy powder coating) for rust resistance and a sleek appearance. The base of each leg is fitted with heavy-duty, articulating nylon/PVC leveling glides to protect floor surfaces and ensure stability on uneven floors.Seat Assembly: The seat pan is constructed from a molded plywood or injection-molded polymer inner shell. It is cushioned with high-resilience, cold-cured Polyurethane (PU) foam with a minimum density of 45 kg/m³ to prevent sagging and ensure long-term comfort. The seat is fully upholstered in heavy-duty, breathable black commercial-grade fabric.Backrest: The mid-height backrest features an ergonomically contoured outer frame manufactured from high-impact, injection-molded black nylon/polypropylene (PP). The frame is tightly stretched with high-tensile, breathable black nylon mesh to provide continuous, ventilated back and lumbar support.Armrests: The chair is equipped with fixed, loop-style armrests constructed from durable, injection-molded black nylon or PP. The armrests elegantly bridge the backrest frame and the seat assembly, providing continuous structural rigidity and a comfortable resting surface for the user's arms. |
| 26 | Classic Carved Wooden Armchair @ 650W X 650D X 1000HProviding and supplying Classic/Heritage style solid wood armchair featuring hand-carved detailing, floral fabric upholstery, and decorative brass nailhead trim.Frame & Woodwork: The entire structural frame, including the cabriole legs, armrests, seat apron, and backrest frame, is constructed from premium, seasoned, and chemically treated solid hardwood (such as Teak or Mahogany) to prevent termite infestation and warping. The frame features intricate, traditional hand-carved floral/scroll motifs on the top crest rail, the front seat apron, and the knees of the front legs. The armrests are elegantly curved with scrolled handholds. All exposed wooden surfaces are finished with a premium quality, multi-coat PU (Polyurethane) or Melamine polish in a dark walnut/mahogany shade, providing a smooth, semi-gloss protective seal.Seat & Backrest Assembly: The seat features a reinforced webbed/sprung base for traditional comfort. Both the seat pan and the backrest are heavily cushioned using high-resilience, cold-cured Polyurethane (PU) foam (minimum density of 40 kg/m³ for the seat and 32 kg/m³ for the backrest) to ensure structural shape retention and longevity.Upholstery & Accents: The cushioned seat and back panels are tightly upholstered in a premium, heavy-duty commercial tapestry or jacquard fabric featuring a classic multi-color floral pattern against a light cream/beige background. The perimeter of the upholstery on both the inner backrest and the seat base is meticulously finished with a continuous border of decorative, antique brass-finished metal upholstery tacks (nailhead trim) securely driven into the wooden frame.Base Hardware: The bottom of each curved leg is fitted with concealed nylon glides or high-density felt pads to ensure stability and protect floor surfaces from scratches. |
| 27 | Classic Carved 2-Seater Sofa (Gold Finish) @ 1600W X 850D X 1050HProviding and supplying Classic/Baroque style 2-seater sofa featuring an ornate hand-carved solid wood frame with gold finish, deep button-tufted backrest, and premium fabric upholstery.Frame & Woodwork: The structural frame—comprising the cabriole legs, scalloped front apron, scrolled armrest faces, and undulating top crest rail—is constructed from premium, seasoned, and chemically treated solid hardwood (such as Teak, Mahogany, or Beech) to prevent termite infestation and warping. The frame showcases intricate, traditional hand-carved motifs, including prominent acanthus leaves, scrollwork, and a central shell/fleur-de-lis carving at the crown and apron. All exposed wooden surfaces are finished in a premium metallic gold (paint or gold-leaf application) and sealed with a protective clear Polyurethane (PU) topcoat.Seat & Backrest Assembly: The main seat base features a heavy-duty, reinforced webbed and zigzag (no-sag) steel spring suspension system for traditional, enduring support. The curved backrest and inner armrests are thickly padded with high-resilience Polyurethane (PU) foam and feature deep button tufting in a classic diamond geometric pattern. The seating area consists of two separate, removable, high-density PU foam cushions (minimum density 40 kg/m³) wrapped in a layer of poly-dacron fiber for enhanced comfort and shape retention.Upholstery: The entire inner backrest, armrests, and base structural panels are fully upholstered in a premium, heavy-duty cream/off-white plush fabric (such as velvet or chenille). The two seat cushions are upholstered in a matching cream fabric featuring a subtle, tonal jacquard or damask pattern.Accessories: The sofa comes inclusive of 2 nos. of square decorative throw cushions (approx. 400mm x 400mm). The throw cushions feature a contrasting multi-color red and green floral tapestry/embroidered pattern on a cream background, complete with concealed zippers for easy removal and cleaning.Base Hardware: The bottom of each carved leg is fitted with concealed anti-skid nylon glides or high-density felt pads to ensure stability and protect floor surfaces from scratching. |
| 28 | Classic Carved Oval Center Table (Gold Finish) @ 1200L X 800D X 450HProviding and supplying Classic/Neoclassical style oval center table featuring an ornate hand-carved solid wood exterior frame with a metallic gold finish and an inset glass top.Exterior Frame & Carving: The visible exterior framework, including the sweeping cabriole legs and the curved, undulating apron, is crafted from premium, seasoned solid hardwood (such as Teak or Mahogany) to allow for deep, intricate hand-carving. The frame features traditional classical motifs, including prominent central medallions, scalloped borders, and flowing acanthus leaf detailing extending down the knees of the legs.Internal Support Structure: The internal skeleton structure supporting the perimeter framework and top assembly is constructed entirely from a robust, heavy-duty plywood grid. No aluminum framing is utilized in the internal hidden sub-structure, ensuring superior, long-lasting structural rigidity and high load-bearing capacity for the heavy glass top.Table Top Assembly: The main top surface features a stepped, precisely routed wooden border that houses a flush-inset top made of premium clear toughened (tempered) glass with a minimum thickness of 8mm to 10mm. The glass edges are smoothly polished and securely seated within the wooden rebate to prevent shifting.Finish: All exposed wooden surfaces undergo meticulous sanding and preparation before being finished in a rich, multi-coat metallic gold finish. The entire wooden structure is completely sealed with a clear, durable protective Polyurethane (PU) topcoat to prevent tarnishing, resist moisture, and provide a smooth, easily maintainable surface.Base Hardware: The beautifully scrolled foot of each cabriole leg is fitted with concealed, anti-skid nylon glides or high-density felt pads to guarantee stability and protect hard floor surfaces (such as marble or tile) from accidental scratching. |
| 29 | Classic Tufted High Back Executive Chair @ 750W X 750D X 1150-1250HProviding and supplying Classic Wingback-style Premium Executive Office Chair fully upholstered in vintage-finish leatherette, featuring deep button tufting, a solid wood clad swivel base, and pneumatic height adjustment.Seat & Backrest Assembly: The structural core is constructed from a heavy-duty, multi-layer contoured molded plywood shell (minimum 15mm thickness). The cushioning features high-resilience, cold-cured Polyurethane (PU) foam with a minimum density of 45 kg/m³ for the seat pan and 32 kg/m³ for the backrest to prevent sagging and ensure enduring comfort. The high backrest features a traditional winged profile with meticulous, deep diamond button-tufting. The entire seat and back assembly is fully upholstered in premium, heavy-duty vintage/distressed brown leatherette (PU Leather).Armrests: The chair features classic, fully integrated rolled armrests. They are thickly padded with PU foam and seamlessly upholstered in matching vintage brown leatherette, featuring refined piping/welt cord details along the seams for structural integrity and aesthetic appeal.Upholstery Accents: The outer perimeter edges of the backrest wings and side panels are detailed with a continuous border of decorative, antique brass-finished metal upholstery tacks (nailhead trim) securely driven into the inner wooden frame.Mechanism: The understructure is equipped with a heavy-duty, multi-functional metallic tilt mechanism featuring upright position locking, lever-operated height control, and a central rotary knob for tilt-tension adjustment. Seat height adjustability is powered by a standard BIFMA-approved pneumatic gas lift cylinder (Class 3 or 4).Base & Mobility: Supported by a heavy-duty 5-prong metal star base that is elegantly clad/covered with solid wood structural caps. The wooden base caps are intricately carved and finished with a premium dark walnut/mahogany Polyurethane (PU) polish. The base is fitted with 5 nos. of premium, heavy-duty twin-wheel hooded swivel castors (approx. 50mm diameter) for smooth, 360-degree mobility. |
| 30 | Classic Tufted Wingback Recliner Chair @ 850W X 950D X 1100HProviding and supplying Classic Wingback-style Recliner Chair fully upholstered in vintage-finish leatherette, featuring deep button tufting, decorative nailhead trim, and an integrated reclining mechanism.Frame & Mechanism: The internal structural frame is constructed from premium, chemically treated, and termite-proof solid wood and heavy-duty commercial plywood. The chair incorporates a robust, heavy-duty metallic reclining mechanism (manual push-back or lever-operated). The steel scissor-mechanism smoothly deploys a padded, two-tier footrest while simultaneously allowing the backrest to recline for optimal resting comfort.Seat & Backrest Assembly: The seating area features a thick, highly comfortable box-seat cushion supported by a no-sag zigzag steel spring suspension system. The cushioning utilizes high-resilience Polyurethane (PU) foam with a minimum density of 40 kg/m³ for the seat and 32 kg/m³ for the backrest. The high backrest is ergonomically contoured with a traditional winged profile and showcases meticulous, deep diamond button-tufting.Armrests & Upholstery: The chair features classic, fully integrated rolled armrests that are thickly padded with PU foam. The entire chair, including the deployable footrest, is seamlessly upholstered in premium, heavy-duty vintage/distressed brown leatherette (PU Leather).Upholstery Accents: The front fascia of the armrests, the vertical side panels, and the outer edges of the wingback are meticulously detailed with a continuous, dual-row border of decorative, antique brass-finished metal upholstery tacks (nailhead trim) securely driven into the solid wood sub-frame.Base & Legs: The chair is elevated on four solid hardwood legs. The front legs feature an ornate, traditional turned/bulbous design, while the rear legs are gently angled and tapered for structural stability. All exposed wooden legs are finished with a premium dark walnut/mahogany Polyurethane (PU) polish and are fitted with concealed PVC/nylon anti-skid glides at the base to protect floor surfaces. |
| 31 | Premium Full-Body Zero Gravity Massage Chair @ 1500L X 800W X 1200H (Upright)Providing and supplying Premium Full-Body Motorized Massage Chair featuring zero-gravity recline, comprehensive air compression therapy, and an integrated digital touch-control panel.Frame & Mechanism: The internal structural chassis is constructed from heavy-duty Mild Steel (MS) to support dynamic mechanical movements and motorized recline functions. The chair features a heavy-duty motorized mechanism designed to shift the user into a \\"Zero-Gravity\\" reclined posture, distributing weight evenly to reduce spinal pressure, driven by high-capacity linear actuators.Upholstery & Exterior: The entire inner seating area, backrest, and limb enclosures are fully upholstered in premium, wear-resistant, and breathable two-tone (tan and dark brown) leatherette (PU Leather). The exterior side panels feature a sleek, modern molded polymer shell with metallic accent lines, ensuring structural integrity and a premium aesthetic.Massage & Therapy Features: Equipped with a comprehensive full-body air compression system. This includes dedicated, wrap-around airbag modules for the forearms and hands (integrated into the armrests), calves, and feet. The deep-enclosure leg rest features dedicated kneading and rolling mechanisms for targeted lower extremity relief. The backrest houses the primary multi-dimensional roller track for neck, back, and lumbar massage.Control Interface: The chair's functions are operated via an integrated, high-definition digital LCD/LED touch-screen control tablet. The control panel is securely mounted on an adjustable, articulated stalk/arm positioned on the right armrest (from the user's perspective), allowing for easy visibility and ergonomic access even while fully reclined.Base Floor Mount: Supported by a robust, heavy-duty molded base platform (finished in black) designed to safely house the main power supply, air pumps, and mechanical drive systems while providing absolute stability on the floor surface during operation. |
| 32 | Part B - Name Board & Signage |
| 33 | PROVIDING SUPPLYING AND FIXING ACRYLIC/OILCOLORS PENTINGS : On Canvas. Providing art work should have been created on the Winsor and Newton cotton canvas and the canvas should be of 10. OZ thickness the texture of canvas should be fine grain and oil / Acrylic colours used to create the artwork are from the Winsor and Newton linseed oil and liquid to apply and mixing for oil colours, after finishing the artwork a coat of varnish should be applied On the artwork the wooden stretcher required for the artwork is made up of pine wood planks 1.5 Inch by 1.5 inch thickness. Fibber frame should be applied for exterior decoration of the Art Work. Art work should be supplied On the location and displayed the wall as perrequirement and instructions. |
| 34 | SUPPLYING & FIXING HIGH RELIEF FRP: sculpture / mural on the wall. A)first Create the Shadow soil model according to the size and drawing. B)Production should be made from dove craving rubble molds for FRP casting. C)FRP material 150 gel coat MS lubrication bonding with oven matte colour D)Work should be done in polyurethane spray colour matte/metallic stone colour for Indoor and outdoor sculpture and mural E)Work should be done with the lacquer and sun coat spray |
| 35 | A) SUPPLYING, PROVDING AND FIXING SS BOX LETTERS:Material : SS 304 grade 0.8 thickness. Letters/alphabet cutting in laser source. 1 inch moulding surrounded to alphabet.5mm nut breezing inside the moulding on sufficient distance for letters feting. Full thread SS road as per size of nuts for feting on wall / background surface for InstallationB)SUPPLING AND FIXING FOLLOWING MATERIAL-SS 1.5 MmThicknessA) Chemical Etching (engraving) For Design & Matter (0.02mm) Deep EtchingB)Stowing Paint feel in to design and matter as per colour choiceC) After feeling colour heating processed for 1hrD) epoxy gloss lamination on surface of product end to end (1mm thick)E) 3 inch x 1 inch wooden frame surrounding to the product with wood polish and Wall hanging Clips on the Background f) Transportation &Installation At site |
| 36 | SUPPLING AND FIXING FOLLOWING MATERIAL-Material: Brass 1. 5 Mm Thickness for PREAMBLA) Chemical Etching (engraving) For Design & Matter (0.02mm) Deep EtchingB) Stowing Paint feel in to design and matter as per colour choiceC) After feeling colour heating processed for 1hrD) epoxy gloss lamination on surface of product end to end (1mm thick)E) 3 inch x 1 inch wooden frame surrounding to the product with wood polish and Wall hanging Clips on the Background f) Transportation &Installation At site |
| 37 | SUPPLYING & FIXING ACRYLIC: 5.MMFor amenities, instruction, safety signage, name plates and room numbers on 5.mm acrylic with vinyl cutting and pasting- Varies Shape and Sizes |
| 38 | Providing, fixing and painting mural artwork on wall surface using approved quality exterior grade acrylic paints, including preparation of surface by cleaning, scraping, putty wherever required, applying primer, base coat, sketching, painting of approved theme/ design, lettering if any, finishing with protective clear coat, scaffolding, and all materials, labour, tools and tackles, complete as directed by Engineer-in- Charge. |
| 39 | STATUE : Supplying and fixing of Statue. First of all the clay model will be prepared according to the subject and Size. POP meld will be put on final clay model After putting the pop mold, the piece of fibber will be removed from it. After removing the fibbers it will be properly joint and polished, after jointing durable metallic bronze effect colourvil apply on it. fibber material + chemical will be used to install on the place |
| 40 | Name Board |
| 41 | Design, Manufacture, Supply, Erection & Installation of 17 mm thick premium quality wooden base with machine-pressed decorative colour laminate finish, complete with high-quality PVC profile edging/frame. The signboard shall have computerized vinyl (Radium/Vinyl) cut lettering and graphics of approved design, colour and size, firmly pasted on the surface. The board shall be single-sided visibility and fixed at site with all necessary accessories, including screws, fasteners, brackets, clamps, supports, adhesives, etc., complete in all respects as directed by the Engineer-in-Charge.(Lobby Boards For Various Information) |
| 42 | Design, Manufacture, Supply, Erection & Installation of 17 mm thick premium quality wooden base with machine-pressed decorative colour laminate finish, complete with high-quality PVC profile edging/frame. The signboard shall have 3 mm thick laser/computerized cut acrylic letters and graphics fixed on a contrasting coloured vinyl patch of approved shade, size and design to provide clear visibility. The board shall be single-sided, complete with all necessary hardware, adhesives, screws, fasteners, brackets, supports, transportation, erection and installation at site, including all labour and materials, complete in all respects as directed by the Engineer-in-Charge.(Lobby Boards For Various Information) |
| 43 | Design, Manufacture, Supply, Erection & Installation of a 17 mm thick premium quality wooden base signboard with machine-pressed decorative colour laminate finish, complete with high-quality PVC profile edging/frame. The signboard shall have computerized Radium/Vinyl cut lettering and graphics of approved colour, font and size, permanently pasted on both sides of the board to provide double-sided visibility. The signboard shall be mounted on a 2 mm thick M.S. (Mild Steel) fabricated 'C' bracket, finished with anti-corrosive primer and powder coating/synthetic enamel paint of approved colour. The work shall include all necessary fixing accessories, fasteners, anchor bolts, welding, transportation, erection and installation, complete in all respects as directed by the Engineer-in-Charge.(Lobby Boards For Various Information) |
| 44 | Design, Manufacture, Supply, Erection & Installation of a single-sided Department Directory Board comprising a 17 mm thick premium quality wooden base with machine-pressed decorative colour laminate finish, complete with high-quality PVC profile edging/frame. The directory board shall consist of a header panel and multiple name plates/partitions arranged in sequence for displaying the names of various departments, sections, offices or officials.The header and name plates shall be finished with computer-cut self-adhesive premium vinyl lettering (or high-intensity reflective radium vinyl, wherever specified) in approved font, size and colour. The board shall include all necessary partitions, layout, graphics, fixing accessories, transportation, erection and installation, complete in all respects as directed by the Engineer-in-Charge. |
| 45 | Design, Manufacture, Supply, Erection & Installation of Single-Sided Aluminium Line Sign Board comprising an extruded Aluminium Alloy (Grade 6063-T6) line sign profile, complete with sign substrate, corner brackets, grub screws, text/graphics and all necessary accessories.The line sign profile shall be 27.5 mm × 9.5 mm × 1.0 mm thick, manufactured from Aluminium Alloy 6063-T6 and MIL-A-8625 Type II anodized in Bronze Colour (Pantone Shade No. 18-0937 TCX) with an anodizing thickness of 10–12 microns. The profile shall incorporate an 11 mm × 3.5 mm 'T' slot with a 5 mm opening for concealed internal corner fixing and shall accommodate sign media up to 4 mm thickness, with a longitudinal projection of 3 mm × 1 mm.The sign frame shall be assembled using MS zinc-plated corner brackets, each measuring 25 mm × 25 mm × 3 mm, with 14.5 mm × 14.5 mm cut-out and M4 threaded holes (2 Nos.), complete with stainless steel grub screws and all fixing hardware.The text and graphics shall be produced using computer plotter-cut or UV printed premium cast self-adhesive vinyl of 40–50 microns thickness, finished in Pantone Shade No. 11-0907 TCX or approved equivalent colour with a satin finish. The vinyl shall be provided with a permanent acrylic pressure-sensitive adhesive and shall be firmly applied to the sign substrate without wrinkles, bubbles or peeling.The item shall include design, artwork preparation, manufacturing, supply, transportation, erection, installation, all fixing accessories, fasteners, drilling, alignment, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 46 | Design, manufacture, Supply, Erection & installation of Double-Sided Name plates (corridor).It shall be made of Double-Sided Name plate profile (2\\", 3\\" & 4\\"), Dumbbell Sleeve profile, Front cap, Mounting cap, Text & Graphics and Protective cover. All profiles shall be made from aluminum alloy (6063-T6), known for its strength and corrosion resistance. It is anodized to MIL-A-8625 Type II standards in a bronze color (Pantone shade no. 18-0937 TCX) with a minimum anodized depth of 10-12 μm.Double Sided Name plate Profile nominal wall thickness 2mm – Top & bottom edges shall be rounded to R6.5 mm. The profile shall have lengthwise circular groove of Ø3.5 mm, on the top & bottom to slide a dumbbell sleeve of Ø3.0 mm to attach combination of double-sided name plate profile. Lengthwise rectangular slot 4.0 mm x 3.5 mm on both sides at top & bottom for media of thickness up to 4mm.Dumbbell Sleeve profile,size 9mm x 3mm x 1.5mm minimum wall thickness. It shall have 2 solid circle of Ø3mm at a centre distance of 6mm connected with 1.5mm thick wall. Text/graphics for the signage is created using cast vinyl with a thickness of 40-50 μm, coloured in Pantone shade no. 11-0907 TCX with a satin finish. The vinyl has a permanent acrylic pressure-sensitive adhesive for long-lasting durability. The graphics are either plotter cut or UV printed and firmly pasted, with 2mm thick optical clear Cast Acrylic Protective Sheet and ABS injection moulded Front cap 14mm(w) x 10mm (h), front radius R209mm, side radius R4mm, radius R7 at both end, ABS injection moulded mounting cap 25mm (w) x 6.5mm (h), side radius R4mm, radius 12.5mm at both end, with internal ribs, clear hole & counter sunk for screw fitting, colour PantoneBlack 6C.Size: 12\\"X 6\\" OR 16\\"X 8\\" OR 18\\"X 8\\" |
| 47 | Design, Manufacture, Supply, Erection & Installation of Single-Sided Corridor Name Plate fabricated from extruded Aluminium Alloy (6063-T6) double-sided name plate profile (2\\", 3\\" or 4\\" as specified) having 2 mm nominal wall thickness, rounded top and bottom edges (R6.5 mm), Ø3.5 mm longitudinal grooves and 4.0 mm × 3.5 mm media slots, anodized to MIL-A-8625 Type II in Bronze Colour (Pantone 18-0937 TCX) with 10–12 micron anodizing, complete with 9 mm × 3 mm × 1.5 mm aluminium dumbbell sleeve profile, ABS injection moulded front cap (14 mm × 10 mm), ABS injection moulded mounting cap (25 mm × 6.5 mm, Pantone Black 6C), 2 mm thick optical clear cast acrylic protective sheet, and 40–50 micron premium cast self-adhesive vinyl graphics in Pantone 11-0907 TCX or approved colour, plotter-cut or UV printed and firmly bonded, including all necessary screws, fasteners, fixing accessories, transportation, erection and installation, complete in all respects as directed by the Engineer-in-Charge. |
| 48 | Supply, Erection & Installation of Single-Sided Non-Combustible Fireproof Modular Safety Glow Sign Board having AA fire rating as per BS 476, manufactured using extruded Aluminium Alloy (6063-T6) aesthetic round profile PU coated in silver colour (40–50 micron coating thickness), size 17.5 mm × 15 mm × 1.2 mm with rounded edges (R12 mm), complete with extruded aluminium fixing brackets having concealed anti-theft fixing arrangement, 2 mm thick aluminium sign substrate, 150–200 micron self-extinguishing photoluminescent film conforming to ASTM D2030-99 with permanent acrylic pressure-sensitive adhesive and minimum luminance of >25 mcd/m² after 10 minutes, >5 mcd/m² after 60 minutes and >3 mcd/m² after 90 minutes, approved plotter-cut or UV printed text/graphics, aluminium extruded end caps finished in silver colour, and all necessary screws, fasteners, accessories, transportation, erection and installation, complete in all respects as directed by the Engineer-in-Charge, in sizes 10\\" × 10\\", 6\\" × 6.5\\", 15\\" × 6.5\\" or other approved sizes as specified. |
| 49 | Design, Manufacture, Supply, Erection & Installation of Successor Board comprising extruded Aluminium Alloy (6063-T6) frame profile, semi-circular plate, interchangeable header and name plate profiles, dumbbell sleeve profile, polyamide corner brackets, text/graphics and 2 mm thick optical clear cast acrylic protective sheet, with all aluminium components anodized to MIL-A-8625 Type II in Bronze Colour (Pantone 18-0937 TCX) with 10–12 micron anodizing (semi-circular plate in Pantone 17-0942 TCX), frame profile of 35 mm × 35 mm × 1.7 mm with interchangeable name plate slots, header and name plate profiles as specified with 'T' slots and circular fixing slots, 9 mm × 3 mm × 1.5 mm aluminium dumbbell sleeve profile, Polyamide-6 injection moulded corner brackets in Pantone Black 6C, 40–50 micron premium cast self-adhesive vinyl plotter-cut or UV printed graphics in Pantone 11-0907 TCX or approved equivalent, firmly bonded and protected by 2 mm thick optical clear cast acrylic sheet, with the complete assembly designed to permit easy addition, removal or replacement of individual name plates, including all necessary fixing accessories, fasteners, transportation, erection and installation, complete in all respects as directed by the Engineer-in-Charge. |
| 50 | Design, Manufacture, Supply, Erection & Installation of Double/Single-Sided Projection Sign Board fabricated from extruded Aluminium Alloy (6063-T6) curved profile, with aluminium frame anodized in silver or powder-coated in approved colour, complete with ABS end caps in black, grey or white, clear non-glare polycarbonate face sheets, approved computer-cut vinyl or UV printed text/graphics, concealed fixing brackets with all necessary hardware, fasteners and accessories, suitable for wall mounting, in widths ranging from 80 mm to 300 mm and of required height, including transportation, erection and installation, complete in all respects as directed by the Engineer-in-Charge. |
| 51 | Design, Manufacture, Supply & Installation of Single-Sided Table Name Plate comprising 17 mm thick premium quality wooden base with machine-pressed decorative colour laminate finish, high-quality PVC profile edging, 3 mm thick computer/laser-cut acrylic lettering mounted on a contrasting coloured acrylic/vinyl patch, complete with a sturdy inclined table-top stand/accessory for stable placement on desks or tables, in sizes 3\\" × 10\\" and 4\\" × 12\\", including all materials, adhesives, fixing accessories and workmanship, complete in all respects as directed by the Engineer-in-Charge.Size -3 x10 |
| 52 | Design, Manufacture, Supply & Installation of Single-Sided Table Name Plate comprising 17 mm thick premium quality wooden base with machine-pressed decorative colour laminate finish, high-quality PVC profile edging, 3 mm thick computer/laser-cut acrylic lettering mounted on a contrasting coloured acrylic/vinyl patch, complete with a sturdy inclined table-top stand/accessory for stable placement on desks or tables, in sizes 3\\" × 10\\" and 4\\" × 12\\", including all materials, adhesives, fixing accessories and workmanship, complete in all respects as directed by the Engineer-in-Charge.Size 4 x12 |
| 53 | Design, Manufacture, Supply & Installation of Map showing the path ways on it on the Auto Glow Self Adsesive Material printed with UV printing and pested on 6 mm WPC sheet Including all Maps, materials, adhesives, fixing accessories and workmanship, complete in all respects as directed by the Engineer-in-Charge. |
| 54 | Design, Manufacture, Supply & Installation of General Instructions Printed on 3 mm ACP with UV printing on it Including all, materials, adhesives, fixing accessories and workmanship, complete in all respects as directed by the Engineer-in-Charge. |
| 55 | Design, Manufacture, Supply & Installation of Plates Of verious sizes in Parking Section Of Base 5 MM Acrylic and Letters on it of 3 mm Acrylic Including all, materials, adhesives, fixing accessories and workmanship, complete in all respects as directed by the Engineer-in-Charge. |
| 56 | Part C -Building Non -SSR Items |
| 57 | Supplying & installation of 27x65 DOMAL Series SLiding Windows Aluminium sliding window of three tracks (System Windows all size 122 mm x 45 mm, bottom section with drain section track weighing 1.83Kilogramper metre and top and side section of size 122x 31.75 mm weighing 1.15Kilogramper running metre with shutter sections made of 27 mm x 65 mm size having average weight of 0.95 Kilogramper running metre As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating with box |
| 58 | a) Supplying and fixing in position Aluminium four track sliding System windows with outer frame made from section of over all size 122 mm x 45 mm, bottom section with drain section track weighing 1.83Kilogramper metre and top and side section of size 122x 31.75 mm weighing 1.15Kilogramper running metre with shutter sections made of 27 mm x 65 mm size having average weight of 0.95 Kilogramper running metre (or as required size) with change in proportionate weight, with 6 mm float glass in three equal panels and alluminium coated stainless steel mosquito net in one (2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete. |
| 59 | Door Frame: Providing Frames for Lead Lined door shutters 1st class Malaysian Hardwood Frame densified and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 PSI pressure as per IS:401 and kiln seasoned to moisture below 15% as per IS:1141 of section 120 X 70 mm with 45mm thick two layered 3mm Lead Line Sheets being overlapped from either side, spray quoted with 2 coats of Enamel paint after one coat of white wood primer of minimum 200 micron etc. complete as per direction of Engineer in Charge. with prior approval of concerned Superitending Engineer. b)Shutter:Supplying of' 44 mm Solid core flush door shutters conforming to the I.S. specification 2202-1991 (specification for wooden flush door shutter–solid core type).32mm Wooden structure of 1st class Hard wood or Pine wood of atleast 50 mm width, to pand bottom rails of 75 mm width, with filler material without any gap of 1st Class Hard wood, or pinewood, all chemically treated for termite and borer resistance as per IS401:2001 underminimum150PSIpressure,andseasonedasperIS1141:1993uptodesiredmoisturelevelasperIS287,withoneside3mmHDF&otherside3mmlead&6mmBWPply;allhot-pressedwithPhenolFormaldehyderesin,internallylippedwithhardwoodbeading,andpastedinHydraulicPressunder50tonnespressure,sprayquotedwith2coatsofenamelpaintofminimum300micron.withpriorapprovalofconcernedSuperitending Engineer. |
| 60 | Providing and installing prefabricated sandwich PUF Panel for Roofing comprising of on two faces PPGL (galvalume) colour coated 0.5mm TCT sheet and CFC free close cell, high density rigid polyurethane foam of high density (40 ± 2 kg/m3) having a thermal conductivity value of 0.023 w/mk and of required thickness sandwiched between the two galvalume sheets. The outer & inner galvalume sheet of 0.50mm TCT steel 550 Mpa shall have a coating mass of 150 g/sqm zinc aluminium alloy coating total of both sides as per AS-1397 and finished with 20 microns colour coating of SMP polyester quality paint as per AS/NZS-2728:1997 (Category-3) over a 5 micron primer on exposed side and a back coat of 5 microns on inner side over a 5 micron primer.For Roof panels 50 (50/80) mm thick Roofing panels having finished with 0.50mm thích TCT Galvalume Hi-Rib sheet on outer side and 0.50 mm TCT Plain Galvalume sheet on inner side including miscellaneous expanses of fixing accessories |
| 61 | Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 60 cm wide with M.S. Bracket Supports including two coats of coal-tarring the upper surface of plank etc. complete. |
| 62 | Strong Room Doors- Defender Prime Door With Grill Class -C Providing & Fixing Godrej Security Solutions Defender Prime Strong Room Door Def PRIME SRD+GG CL-C BIS KL of Standerd Size. |
| 63 | Strong Room Safe -Defender Prime Safe -Size 778 H X 623W X660 D- Proving & Fixing Godrej Security Solutions Defender Prime Safe (BIS) 31-DEF PRIME CLASS C SAFE31-DEF PRIME CLASS C SAFESize: 778 H x 623 W x 660 D |
| 64 | Part D -Furniture Misc. Items |
| 65 | 8mm thick Flexible Plywood |
| 66 | Providing and fixing 8mm thick Flexible Plywood (long-grain/cross-grain as required) for curved surfaces. Rate includes cost of flexi-ply, adhesives, framing hardware, and labor for complete installation as per design specifications.\\" |
| 67 | Drawer/Cabinet locks |
| 68 | \\"Supplying and fixing premium quality multipurpose drawer/cabinet locks of approved make (such as Godrej, Ebco, Hettich, Hafele, or equivalent). The lock shall feature a brass cylinder, stainless steel/zinc alloy body with an SS/Chrome finish, and include a striking plate, a keyhole cover (rosette), and a minimum of two identical keys. The rate includes the cost of all materials, fixing hardware, carpentry work (drilling/routing). |
| 69 | Cabinet and wardrobe handles |
| 70 | Supplying and fixing premium quality cabinet and wardrobe handles of approved make (such as Hettich, Hafele, Godrej, Ebco, or equivalent). The handles shall be of specified design (D-handle, bow handle, or bar handle) in SS 304 / Chrome / Antique Brass finish, ranging from 150mm to 300mm in length. The rate includes the cost of the handle, suitable length metric machine screws properly sized for fixing through 25mm thick board shutters and fascias, accurate drilling. |
| 71 | toughened (tempered) glass |
| 72 | Supplying and fixing 12mm thick clear toughened (tempered) architectural glass of approved make (such as Saint-Gobain, Asahi, ModiGuard, or equivalent) for frameless partitions/doors. The glass shall be free from waves, bubbles, and flaws. The rate includes machine-flat polished edges, chamfering, and making necessary cut-outs and holes for hardware prior to the toughening process. |
| 73 | Concealed auto-hinges |
| 74 | Supplying and fixing premium quality concealed auto-hinges (clip-on type with built-in soft-close mechanism) of approved make (such as Hettich, Blum, Hafele, Ebco, or equivalent). The hinges must feature a heavy-duty cup design (0-crank, 8-crank, or 15-crank as per detail) specifically rated to carry the weight of 25mm thick board shutters. The rate includes the cost of the hinges, SS mounting plates, SS screws, precise cup drilling (routing) |
| 75 | cushion |
| 76 | Supplying and fixing custom upholstered cushioning for fixed seating elements. The rate includes constructing the base framework entirely from a robust plywood grid structure, topped with commercial plywood. The cushioning shall consist of premium high-density polyurethane foam (minimum 40-density) topped with synthetic wadding (Dacron) for shape retention. Rate includes wrapping and tailoring with approved premium fabric or leatherette, heavy-duty stitching, adhesives, and complete labor for secure installation onto the base framing.\\" |
| 77 | glass mirror |
| 78 | Supplying and fixing 5mm thick premium quality, copper-free and corrosion-resistant clear float glass mirror of approved make (such as Saint-Gobain, ModiGuard, or equivalent). The rate includes machine-polished flat edges, providing and fixing an 18mm commercial plywood backing board (treated with anti-termite and waterproof coating), and pasting the mirror using neutral-cure, mirror-safe silicone adhesive (Dow Corning/McCoy Sudal). Rate includes all labor, leveling, and finishing required for complete installation. |
| 79 | Aluminum Square Hollow Section |
| 80 | Supplying and fixing 50mm x 50mm extruded Aluminum Square Hollow Section (SHS) tubes of minimum 1.5mm thickness (Jindal, Hindalco, or approved equivalent make) for exterior elevation louvers or facade framework. The rate includes a premium powder-coated or anodized finish (shade as per architect's approval), cutting to exact lengths, and securing to the main structural framework using concealed MS/SS L-cleats, heavy-duty anchor fasteners, and machine screws. |
| 81 | Aluminum Square Hollow Section |
| 82 | Supplying and fixing 50mm x25mm extruded Aluminum Square Hollow Section (SHS) tubes of minimum 1.5mm thickness (Jindal, Hindalco, or approved equivalent make) for exterior elevation louvers or facade framework. The rate includes a premium powder-coated or anodized finish (shade as per architect's approval), cutting to exact lengths, and securing to the main structural framework using concealed MS/SS L-cleats, heavy-duty anchor fasteners, and machine screws. Rate covers all materials, scaffolding, joint sealants, and expert labor for perfect plumb and alignment. |
| 83 | Aluminum profile glass shutters |
| 84 | Supplying and fixing premium narrow-stile aluminum profile glass shutters of approved make and finish (such as matte black, rose gold, or brushed bronze). The shutter frame shall enclose a 5mm thick toughened glass (clear, tinted, or fluted as per design) fixed securely with concealed internal gaskets. The rate includes the cost of the custom-cut aluminum profile, glass, heavy-duty concealed narrow-profile hinges, integrated handles, and expert carpentry labor for perfect alignment and smooth operation when mounted to the internal plywood cabinet skeleton. |
| 85 | Mild Steel (MS) table stands |
| 86 | Supplying and fabricating heavy-duty Mild Steel (MS) table stands/bases using specified MS Hollow Square or Rectangular tubes (e.g., 50mm x 50mm or 40mm x 40mm of minimum 16-gauge/1.5mm thickness). The rate includes cutting, continuous arc welding, grinding all welded joints flush and seamless, and applying one coat of anti-rust zinc-chromate primer followed by a premium powder-coated or PU paint finish (shade as per architect's approval). The rate also includes welding MS flat plates at the top with pre-drilled countersunk holes for securing the tabletop, provision of heavy-duty adjustable nylon/metal floor levelers at the base. |
| 87 | wardrobe handles |
| 88 | Supplying and fixing premium quality architectural wardrobe handles of 300mm length of approved make (such as Hettich, Hafele, Godrej, Dorset, or equivalent). The handles shall be of specified design (D-handle, bow handle, or straight bar) in an approved finish (SS 304, matte black, antique brass, or rose gold). The rate includes the cost of the handles, supplying extended metric machine screws specifically sized to pass through and securely fasten into 25mm thick board wardrobe doors, accurate drilling. |
| 89 | Vinyl plank flooring |
| 90 | Supplying and laying premium Stone Plastic Composite (SPC) / Luxury Vinyl Tile (LVT) plank flooring of approved shade, texture, and wood-grain finish. The planks shall have a minimum overall thickness of 4mm to 5mm, including a minimum 0.3mm to 0.5mm transparent wear layer for high traffic durability. The rate includes laying the planks over a 1.5mm/2mm IXPE acoustic underlayment foam using a seamless click-and-lock floating installation method. |
| 91 | Clear float glass |
| 92 | Supplying and fixing 5mm thick plain clear float glass of approved make (such as Saint-Gobain, Asahi India/AIS, Modiguard, or equivalent). The rate includes exact cutting to size, grinding/machine polishing of all exposed edges to remove sharpness, and fixing the glass into designated aluminum, UPVC, or wooden frames. Installation includes the provision of appropriate EPDM rubber gaskets, structural silicone sealant (neutral cure), or timber/metal beading for a rattle-free fit. |
| 93 | Charcoal Louver Panels |
| 94 | Supplying and fixing premium decorative Charcoal Louver Panels (Polystyrene/WPC base) of approved make (e.g., Euro Pratik, Treelam, or equivalent), shade, and fluted profile. The rate includes proper surface alignment and fixing the interlocking louver panels to the backing substrate using high-strength specialized panel adhesive (structural silicone, PU adhesive, or Fevicol HeatX) along with concealed headless brad nails. The rate covers the cost of panels, adhesives, precise pattern matching, seamless jointing, wastage, and complete skilled carpentry labor to achieve a flawless finish. |
| 95 | Medium Density Fiberboard (MDF) |
| 96 | \\"Supplying and fixing 12mm thick Medium Density Fiberboard (MDF) of approved make (such as Action TESA, Greenpanel, Century, or equivalent) for decorative jali, screens, or partitions. The rate includes precision CNC routing as per the approved architectural AutoCAD drawings/patterns. Includes thorough sanding of all cut grooves and exposed edges, and fixing the jali securely into designated wooden, metal, or aluminum profile frames using appropriate fasteners. Rate covers the cost of MDF, CNC machining, wastage, and skilled installation labor |
| 97 | Medium Density Fiberboard (MDF) |
| 98 | \\"Supplying and fixing 6mm thick Medium Density Fiberboard (MDF) of approved make (such as Action TESA, Greenpanel, Century, or equivalent) for decorative jali, screens, or partitions. The rate includes precision CNC routing as per the approved architectural AutoCAD drawings/patterns. Includes thorough sanding of all cut grooves and exposed edges, and fixing the jali securely into designated wooden, metal, or aluminum profile frames using appropriate fasteners. |
| 99 | Medium Density Fiberboard (MDF) |
| 100 | \\"Supplying and fixing 18mm thick Medium Density Fiberboard (MDF) of approved make (such as Action TESA, Greenpanel, Century, or equivalent) for decorative jali, screens, or partitions. The rate includes precision CNC routing as per the approved architectural AutoCAD drawings/patterns. Includes thorough sanding of all cut grooves and exposed edges, and fixing the jali securely into designated wooden, metal, or aluminum profile frames using appropriate fasteners. |
| 101 | Medium Density Fiberboard (MDF) |
| 102 | \\"Supplying and fixing 8mm thick Medium Density Fiberboard (MDF) of approved make (such as Action TESA, Greenpanel, Century, or equivalent) for decorative jali, screens, or partitions. The rate includes precision CNC routing as per the approved architectural AutoCAD drawings/patterns. Includes thorough sanding of all cut grooves and exposed edges, and fixing the jali securely into designated wooden, metal, or aluminum profile frames using appropriate fasteners. |
| 103 | PVC edge banding |
| 104 | Supplying and applying premium PVC edge banding tape (0.8mm to 2.0mm thick, as specified) of approved make (such as Rehau, Döllken, or equivalent) matching the exact shade and finish of the adjoining laminate/veneer. The tape shall be applied to all exposed raw edges of the board using a machine edge-bander with high-temperature hot-melt glue (EVA/PUR). The rate includes precision end-cutting, top and bottom edge milling/trimming, and corner buffing to ensure a smooth, seamless, and sharp-free finish. |
| 105 | Teak Wood beading |
| 106 | Supplying and fixing 1-inch wide solid Teak Wood beading/bidding (half-round, square, or custom molded profile as per design) for decorative wall paneling, wainscoting, or flush door trims. The beading shall be of first-class, seasoned Teak Wood (CP, Nagpur, or Ghana, as approved), free from sapwood, knots, and cracks. The rate includes precision 45-degree miter cutting at all corners, fixing with premium wood adhesive and concealed headless pins, filling nail holes with matching wood filler, and sanding the surface to a perfectly smooth finish ready for polish. |
| 107 | Teak Wood beading |
| 108 | Supplying and fixing 1/2-inch wide solid Teak Wood beading/bidding (half-round, square, or custom molded profile as per design) for decorative wall paneling, wainscoting, or flush door trims. The beading shall be of first-class, seasoned Teak Wood (CP, Nagpur, or Ghana, as approved), free from sapwood, knots, and cracks. The rate includes precision 45-degree miter cutting at all corners, fixing with premium wood adhesive and concealed headless pins, filling nail holes with matching wood filler, and sanding the surface to a perfectly smooth finish ready for polish. |
| 109 | Teak Wood beading |
| 110 | Supplying and fixing 3/4-inch wide solid Teak Wood beading/bidding (half-round, square, or custom molded profile as per design) for decorative wall paneling, wainscoting, or flush door trims. The beading shall be of first-class, seasoned Teak Wood (CP, Nagpur, or Ghana, as approved), free from sapwood, knots, and cracks. The rate includes precision 45-degree miter cutting at all corners, fixing with premium wood adhesive and concealed headless pins, filling nail holes with matching wood filler, and sanding the surface to a perfectly smooth finish ready for polish. |
| 111 | Teak Wood beading |
| 112 | Supplying and fixing 1.3/4-inch wide solid Teak Wood beading/bidding (half-round, square, or custom molded profile as per design) for decorative wall paneling, wainscoting, or flush door trims. The beading shall be of first-class, seasoned Teak Wood (CP, Nagpur, or Ghana, as approved), free from sapwood, knots, and cracks. The rate includes precision 45-degree miter cutting at all corners, fixing with premium wood adhesive and concealed headless pins, filling nail holes with matching wood filler, and sanding the surface to a perfectly smooth finish ready for polish. |
| 113 | Teak Wood beading |
| 114 | Supplying and fixing2-inch wide solid Teak Wood beading/bidding (half-round, square, or custom molded profile as per design) for decorative wall paneling, wainscoting, or flush door trims. The beading shall be of first-class, seasoned Teak Wood (CP, Nagpur, or Ghana, as approved), free from sapwood, knots, and cracks. The rate includes precision 45-degree miter cutting at all corners, fixing with premium wood adhesive and concealed headless pins, filling nail holes with matching wood filler, and sanding the surface to a perfectly smooth finish ready for polish. |
| 115 | Teak Wood beading |
| 116 | Supplying and fixing 2.5-inch wide solid Teak Wood beading/bidding (half-round, square, or custom molded profile as per design) for decorative wall paneling, wainscoting, or flush door trims. The beading shall be of first-class, seasoned Teak Wood (CP, Nagpur, or Ghana, as approved), free from sapwood, knots, and cracks. The rate includes precision 45-degree miter cutting at all corners, fixing with premium wood adhesive and concealed headless pins, filling nail holes with matching wood filler, and sanding the surface to a perfectly smooth finish ready for polish. |
| 117 | 200cm vintage-styl |
| 118 | Supplying and fixing premium 2000mm (200cm) long vintage-style architectural pull handles of approved make and design. The handle shall feature classical or ornate detailing in an Antique Brass, Oxidized Copper, or Blackened Bronze finish. The rate includes the cost of the handles, supplying extra-length metric machine screws specifically sized and threaded for deep, secure fastening through 25mm thick board wardrobe doors and shutter fascias. Includes accurate template drilling. |
| 119 | 100cm vintage-styl |
| 120 | Supplying and fixing premium 1000mm (100cm) long vintage-style architectural pull handles of approved make and design. The handle shall feature classical or ornate detailing in an Antique Brass, Oxidized Copper, or Blackened Bronze finish. The rate includes the cost of the handles, supplying extra-length metric machine screws specifically sized and threaded for deep, secure fastening through 25mm thick board wardrobe doors and shutter fascias. Includes accurate template drilling. |
| 121 | 18-inch drawer CHANNEL |
| 122 | Providing and installing 18-inch premium concealed undermount drawer runners CHANNEL with an integrated soft-close mechanism (Quadro or equivalent type) of approved make (such as Hettich, Blum, Hafele, or Ebco). The hardware must have a minimum dynamic load-bearing capacity of 30kg to effortlessly support fully loaded drawers equipped with heavy 25mm thick shutter fascias. The rate covers the cost of one pair of runners, front locking catches/clips, exact sizing and routing of the drawer box, secure mounting directly into the internal plywood skeleton structure, and complete adjustment labor for perfect fascia alignment. |
| 123 | stainless steel Chain |
| 124 | Supplying and fixing heavy-duty stainless steel Chain rope door restrictors (cabinet stays) of approved make for wardrobe shutters. The restrictor shall be specifically designed to limit the opening angle of the door (e.g., to 90 or 100 degrees) to prevent over-extension and damage to the hinges. The rate includes the cost of the braided SS cable, heavy-cast mounting plates, and secure fastening to both the internal plywood framework and the heavy 25mm thick shutter using deep-threaded, heavy-gauge wood screws. |
| 125 | heavy-duty magnetic cabinet |
| 126 | Supplying and fixing heavy-duty magnetic cabinet catches of approved make (such as Hettich, Hafele, Ebco, or equivalent) for wardrobe and casework shutters. The unit shall comprise a high-pull-force magnet housed in a durable polymer or zinc-alloy casing, along with a corresponding counter-steel strike plate. The rate includes precise positional alignment, securely fastening the magnet body to the internal casework and the strike plate to the interior of the heavy shutter using appropriate wood screws. |
| 127 | kitchen trolley |
| 128 | Supplying and fixing heavy-duty, rust-proof modular kitchen trolleys (wire baskets) of approved make (such as Hettich, Hafele, Godrej, or Sleek). The basket wire mesh and base frame shall be manufactured strictly from SS 304 grade stainless steel with a high-micron chrome-plated finish. The rate includes the cost of the SS basket (Plain, Thali, Cup/Saucer, or Cutlery profile as per drawing), heavy-duty adjustable front fascia mounting brackets to securely hold the heavy 25mm thick front shutter, and perfectly aligned installation onto telescopic or soft-close drawer runners. |
| 129 | 15-inch drawer CHANNEL |
| 130 | Providing and installing 15-inch (approx. 380mm) premium concealed undermount drawer runners with an integrated soft-close mechanism (Quadro or equivalent type) of approved make (such as Hettich, Blum, Hafele, or Ebco). The hardware must have a minimum dynamic load-bearing capacity of 25kg to 30kg to seamlessly support the drawer box and heavy 25mm thick front fascias. The rate covers the cost of one pair of runners, front locking catches, specific sizing and routing of the drawer box base, secure mounting directly into the internal plywood skeleton structure Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender