Tender For Internal Faslifting Work Under Santran Banquet Hall Situated In Indira Gandhi Pratishthan
Tender Value
5.84 Crore
Estimated cost
Bid Submission
15 Jul 2026
5 days left
EMD
17.54 Lakhs
Bank guarantee accepted
Document Fee
4366
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Internal Faslifting Work Under Santran Banquet Hall Situated In Indira Gandhi Pratishthan
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing and applying plaster of Paris (POP) false ceiling consisting of frame work made with 50mm sq. M.S tubes of 18 G thickness as main runners at 600 mm c/c both ways, suspended/ supported with M.S flats 25x4mm from existing R.C.C slab including providing and fixing expanded metal of size 5.25mm as per approved shade as per drawing & specification as approved by the Architect/ Engineer -in-Charge- POP |
| 2 | Providing and laying Double Charged tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 1800x1200mm-3250 |
| 3 | Providing and laying Moroccan tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).-3850 |
| 4 | Size of Tile 600x600 mmDSR 2023- 11.41.2 |
| 5 | Size of Tile 600x600 mmDSR 2023- 11.48.2 |
| 6 | Area of slab over 0.50 sqmDSR 2023- 8.2.2.2 |
| 7 | Providing & Making & Fixing of Commercial Wall Panneling made with Aluminium Section of 2\\"x1\\" @ 2'CC frame work cladded with 12MM Ply complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-36 |
| 8 | Providing & Making & Fixing of Commercial Wall Partition made with Alumistum Section of 2\\"x1 2'CC frame work cladded with 9MM Ply on Both Side complete with painted or polishe, as per the approved design all complete as per drawing, specification and direction as approved by Engineer-in-Charge.-37 |
| 9 | Providing and supplying Acoustical Wall Paneling with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and fire -resistant fabric with an option of colours as per the choice of the Architect/ Person in-charge of size as required providing a minimum sound absorption level to be affixed to wall using Wall panel impalers and construction adhesives as per the instructions laid down by the installer as per the approved design as approved by the Architect/ Engineer -in-Charge. MR-9000 |
| 10 | Providing & Making & Fixing of Wall Panneling made with 4MM Veneer & Teak Wood Mouldings as per design on Existing Surface & then Finished with Water Base PU Polish, as per the approved design all complete as per drawing, specification and direction as approved by Engineer-in-Charge.-40 |
| 11 | Providing & Making & Fixing of Wall Panneling made with 1MM Laminate & 5.5MM MDF on Existing Surface complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer-in-Charge.-39 |
| 12 | Providing & Making & Fixing of Wall Panneling made with Coloured Lacquered Glass on Existing Surface complete with Melamine Polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-5423 |
| 13 | Providing & Fixing of Wall Paper of approved shade as per drawing & specification as approved by Engineer -In-Charge.-49 |
| 14 | Providing & Fixing of Designer Computer Numerical Control (CNC) Cutted Exterior Grade MDF Sheet which shall be Duco Painted & fixed on Existing Commercial Wall Panelling with the help of screw, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-22500 |
| 15 | Providing & Fixing 12MM Toughned Glass Partition Modi float glass fixed edge to edge as per design and drawing and polished where required along with neccesary hardware all complete as per drawing, specification and direction of engineer incharge.-6501 |
| 16 | Providing & Fixing of 12MM Toughened Glass Door with all hardware as per design with edge polish m/c top & bottom pivot and bottom lock with handle all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-19366 |
| 17 | Providing & Making & Fixing of Double Skin 19MM Door (ISI Marked) complete with Floor Spring, Top & Bottom Pivot, Lock Body & Handle all complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction of engineer incharge. (PSR)- IGP-SM-36 |
| 18 | Providing & fixing of 32MM Flush Door complete with all Fittings Like Hinges, Mortis lock, Door closer, Tower Bolt etc all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-16778 |
| 19 | Providing & Fixing of Plotter Cutted Designer Film of approved shade as per drawing & specification as approved by Engineer -in-Charge. M.R- Plotter Cutted Designer |
| 20 | Providing & Fixing of Plotter Cutted Designer Coloured Vinyl of approved shade as per drawing & specification as approved by Engineer -in-Charge.-4050 |
| 21 | Supply & Fixing of windows made from multi chambered UPVC profiles of minimum 60/108 mm thickness of (Wintech make or equivalent) in natural from stailized for heat, light, impact & UV radiation. The UPVC profiles should be reinforced with galzvanized steel profiles of designed thickness.Float glass of approved colour in 5mm Toughened Glass or as desired by the costumer shall be fixed with heveled beads. All openable / sliding sashes shall be having grey/black colored weather seal fitted in continuous lenghts made from bubble PTV Rubber & side Hung with 90L openin friction syats of rust proof stainless steel with provision of multipoint lockng system (casement only) made from Espag rods (coated steel) all handle shall be made from die Cast zinc alloy in white finish only as approved by the Architect/Engineer-In-Charge.-53 |
| 22 | Providing & Fixing of Zebra Blinds of approved shade as per drawing & specification as approved by Engineer-in-Charge.-47 |
| 23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.DSR 2023- 13.80 |
| 24 | Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqmDSR 2023- 13.48.1 |
| 25 | Providing & Fixxing of WPC Chaukat as per the approved design all complete as per drawing, specification and direction of engineer incharge.-1500 |
| 26 | Providing and fixing Operable partition of consisting of series of individual flat elements travelling along the ceiling track assembled to form a solid wall. The sound insulation of the operable partition should be 50db. Elements must be constructed of a torsion-free steel horizontal tube frame and torsion-stiff vertical aluminium profiles, bolted together to make the element strong and sturdy. The frame must be clad either side with 12mm MDF panels hung in acoustic free suspension from the panel frame. The elements must be inter-connected by means of a positive locking concave/convex aluminium profile with an integrated magnetic strip and sealing lip having a linear attraction complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge.-115000 |
| 27 | Group ADSR 2022 E-M- 1.10.1 |
| 28 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.DSR 2022 E-M- 1.31 |
| 29 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.DSR 2022 E-M- 1.32 |
| 30 | 2X1.5 sq. mm + 1 X 1.5 sq. mm earth wireDSR 2022 E-M- 1.14.1 |
| 31 | 2 X2.5 sq. mm + 1X2.5 sq. mm earth wireDSR 2022 E-M- 1.14.2 |
| 32 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wireDSR 2022 E-M- 1.14.3 |
| 33 | 20 mmDSR 2022 E-M- 1.21.1 |
| 34 | 1 or 2 ModuleDSR 2022 E-M- 1.28.1 |
| 35 | 3 ModuleDSR 2022 E-M- 1.28.2 |
| 36 | 4 ModuleDSR 2022 E-M- 1.28.3 |
| 37 | 6 ModuleDSR 2022 E-M- 1.28.4 |
| 38 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.DSR 2022 E-M- 1.26 |
| 39 | Single poleDSR 2022 E-M- 2.10.1 |
| 40 | S&F of 125 Amp 4 pole MCCB (25 KA) Thermal Magnetic release-10615 |
| 41 | S & F surface/Flush mounting 12ways V TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT-A-13640 |
| 42 | Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respect. CAT-AAA-94 |
| 43 | Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. CAT-AAA-95 |
| 44 | Supply and fixing of 150mm Fresh Air Fan all complete as per drawing and specification and direction of engineer incharge. Make-Crompton/Bajaj/Havels Equivalent-2107 |
| 45 | Supply and fixing of 400mm Wall Fan all complete as per drawing and specification and direction of engineer incharge. Make-Crompton/Bajaj/Havels Equivalent-3495 |
| 46 | Supply & Fixing of LED Profile Light all complete as per drawing and specification and direction of engineer incharge. Make-Ledadvance/Ledos/Ledlum/Philips, Equivalent-1249 |
| 47 | Supply & Fixing of LED Profile Light Driver all complete as per drawing and specification and direction of engineer incharge. Make-Ledadvance/Ledos/Ledlum/Philips, Equivalent-3894 |
| 48 | Supply and Fixing of Deep Recess Mounting round 10 Watt COB LED Spot Light having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. Make-Ledadvance/Ledos/Ledlum/Philips, Equivalent- Deep Recess Mounting |
| 49 | Supply and Fixing of Deep Recess Mounting round 12.5 Watt COB LED Spot Light having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. Make-Ledos-3890 |
| 50 | Providing & Fixing of Modular plate type white RJ 45 CAT 6 Data/Talephone outlet / information outlets ETL verified to meet or exceed TIA / EIA category 6 requirements, universal wiring label permitting to either T568A or T568B, UL listed, for computer networking complete in all respect with cover plate, grid plate, screws, MS box, etc with connections as required with 2nos RJ-45 Data outlet-1478 |
| 51 | Supply & Fixing of LED Wall Bracket Light Fitting & Drivers, all complete as per drawing and specification and direction of engineer incharge. Make-Imported-12500 |
| 52 | Supply & Fixing of LED Ceiling Chandlier Light Fitting & Drivers, all complete as per drawing and specification and direction of engineer incharge. Make-Imported-85500 |
| 53 | Supply & Fixing of Big Size LED Ceiling Chandlier Light Fitting & Drivers, all complete as per drawing and specification and direction of engineer incharge. Make-Imported-290000 |
| 54 | Providing & Fixing, Single Seater Sofa of Size: 850L X 790D X 790H Seat Foam: the sofa is made up of fine quality leatherette.The structure is made up of silver wood and pine wood.The Seat is made of PU Foam with Density 32 to 40 +/- 2 kg/cu .mtr Seat is upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density 32 to 40 +/- 2 kg/cu, Backis upholstered with Leatherite.Unterstructure is made up of silver wood or pine wood , 4mm Dia zigzag Spring is mounted in the understructure for support and additional cushioning purpose. Legs should be made up of stainless steel tubes/pipes, S-SERIES, Make-Featherlite / Geeken / Hof / Ferris/ Equivalent-30185 |
| 55 | Providing & Fixing, Three Seater Sofa of Size: 2050L X 790D X 790H Seat Foam: the sofa is made up of fine quality leatherette.The structure is made up of silver wood and pine wood.The Seat is made of PU Foam with Density 32 to 40 +/- 2 kg/cu .mtr Seat is upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density 32 to 40 +/- 2 kg/cu, Backis upholstered with Leatherite.Unterstructure is made up of silver wood or pine wood , 4mm Dia zigzag Spring is mounted in the understructure for support and additional cushioning purpose. Legs should be made up of stainless steel tubes/pipes, S-SERIES, Make-Featherlite / Geeken / Hof / Ferris/ Equivalent-61269 |
| 56 | \\"Providing & Fixing, CENTER TABLE @900 MM DIA, MODEL: CT-2105 MARBLE CENTER TABLE (0.9M), TOP - STONE , BASE - BLACK TIATANIUM. Supplying and installation of a contemporary center table designed to complement modern office and lounge interiors. The table has an overall dimension of 600mm (Length) x 600mm (Width) x 425mm (Height), offering a spacious and proportionate surface suitable for waiting areas, meeting lounges, or collaborative spaces. The tabletop is made from 12mm thick toughened glass, offering high impact resistance and durability. The glass is partially tempered, adding safety features to reduce the risk of sharp breakage. The top profile is square-edged with bevelled edges, enhancing the aesthetics while ensuring user safety through smooth contours and soft corners. The glass top is supported by high-quality vacuum suction caps, securely fixed over the underframe to ensure firm and stable placement without visible fasteners, contributing to a clean, floating appearance. The understructure consists of a stainless steel (SS) frame fabricated from SS 202 grade pipe, known for its corrosion resistance and strength. The pipes used in the frame have a diameter ranging from 20mm to 25.4mm and a wall thickness of 2mm, providing superior load-bearing capacity and structural stability. The frame is finished in a high-gloss chrome finish, offering a sleek, premium look suitable for modern interiors. To protect flooring surfaces and enhance stability, the table is equipped with high-quality PPCP (Polypropylene Copolymer) shoes at the base of each leg. These shoes prevent scratches and scuffs on delicate floors while also absorbing minor impact loads. This center table combines the durability of stainless steel with the elegance of toughened glass, making it a stylish, low-maintenance, and long-lasting addition to any office or hospitality environment., Make-Featherlite / Geeken / Hof / Ferris/ Equivalent\\"-27500 |
| 57 | \\"Providing & Fixing, CENTER TABLE @500 MM DIA, MODEL: CT-2105 MARBLE CENTER TABLE (0.5M), TOP - STONE , BASE - BLACK TIATANIUM. Supplying and installation of a contemporary center table designed to complement modern office and lounge interiors. The table has an overall dimension of 600mm (Length) x 600mm (Width) x 425mm (Height), offering a spacious and proportionate surface suitable for waiting areas, meeting lounges, or collaborative spaces. The tabletop is made from 12mm thick toughened glass, offering high impact resistance and durability. The glass is partially tempered, adding safety features to reduce the risk of sharp breakage. The top profile is square-edged with bevelled edges, enhancing the aesthetics while ensuring user safety through smooth contours and soft corners. The glass top is supported by high-quality vacuum suction caps, securely fixed over the underframe to ensure firm and stable placement without visible fasteners, contributing to a clean, floating appearance. The understructure consists of a stainless steel (SS) frame fabricated from SS 202 grade pipe, known for its corrosion resistance and strength. The pipes used in the frame have a diameter ranging from 20mm to 25.4mm and a wall thickness of 2mm, providing superior load-bearing capacity and structural stability. The frame is finished in a high-gloss chrome finish, offering a sleek, premium look suitable for modern interiors. To protect flooring surfaces and enhance stability, the table is equipped with high-quality PPCP (Polypropylene Copolymer) shoes at the base of each leg. These shoes prevent scratches and scuffs on delicate floors while also absorbing minor impact loads. This center table combines the durability of stainless steel with the elegance of toughened glass, making it a stylish, low-maintenance, and long-lasting addition to any office or hospitality environment., Make-Featherlite / Geeken / Hof / Ferris/ Equivalent\\"-16300 |
| 58 | Supply of Daikin Make Ductable AC of 11.0 Tr all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-214406 |
| 59 | One Time Lifting, shifting, positioning, installation, testing of indoor units, outdoor units, fittings (Imported Y-joints & header etc.) remote controls of indoor units, complete as per specification and drawings, Outdoor Unit all complete as per drawing, specification and direction as approved by Engineer -in-Charge. Outdoor Units-15000 |
| 60 | One Time Lifting, shifting, positioning, installation, testing of indoor units, outdoor units, fittings (Imported Y-joints & header etc.) remote controls of indoor units, complete as per specification and drawings, Ductable Units all complete as per drawing, specification and direction as approved by Engineer -in-Charge. Indoor Units-5000 |
| 61 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 28.6 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-2275 |
| 62 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 15.9 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-1300 |
| 63 | Supply, Installation, testing and commissioning of Hard PVC Pipe Suitable for 10 Kg/cm2 water pressure including fittings such as elbow, socket, reducer, etc.insulated with 6 mm thick tubular nitrile insulation, 40 mm dia with 6 MM thickness all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-595 |
| 64 | Supply, Installation, testing and commissioning of Hard PVC Pipe Suitable for 10 Kg/cm2 water pressure including fittings such as elbow, socket, reducer, etc.insulated with 6 mm thick tubular nitrile insulation, 32 mm dia with 6 MM thickness all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-583 |
| 65 | Providing & fixing control cum transmission wiring of copper in suitable conduits between indoor and out door unit all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-228 |
| 66 | Supply & Laying of M S Slotted Angle for pipes and cables horizontaly and vertically along with threaded rod, nut, bolt, saddle, tie etc all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-260 |
| 67 | Supplying and fixing of external thermal insulation on ducts with Closed Cell Elastomeric Nitrile Rubber Foam (Class - O, Fire retardent) 9MM all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-1150 |
| 68 | Supplying and fixing accaustic lining with 25mm thick resin bonded fiber glass of density 32 kg/cum on the inner side of ducting including flexing RP tissue paper finished with 30 G perforted aluminium sheet all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-1650 |
| 69 | Supplying and fixing of powder coated aluminium section supply air diffusers/ grill with fixed air distribution grid all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-12500 |
| 70 | Supplying and fixing of MS Valume control damper for supply air all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-8500 |
| 71 | Supplying and fixing of Canvas Connection For Ductable Units all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-7500 |
| 72 | Wall Chaseing as per site requirement all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-180 |
| 73 | Making Core cutting in Walls, Beams, RCC structure as per site requirement all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-3500.001 |
| 74 | Supply & Fixing of Outdoor Stand all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-8500 |
| 75 | GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.DSR 2023- 12.54.2 |
| 76 | Of area 3 sq. metres and belowDSR 2023- 15.12.1 |
| 77 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.DSR 2023- 15.57 |
| 78 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortarDSR 2023- 15.7.4 |
| 79 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.DSR 2023- 15.3 |
| 80 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer in-charge.DSR 2023- 15.5 |
| 81 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mmDSR 2023- 15.23.1 |
| 82 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.DSR 2023- 13.91 |
| 83 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.DSR 2023- 15.56 |
| 84 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.DSR 2023- 15.60 |
| 85 | Cement mortar 1:3 (1 cement :3 coarse sand)DSR 2023- 6.13.1 |
| 86 | Cement mortar 1:4 (1 cement : 4 coarse sand)DSR 2023- 6.4.1 |
| 87 | 1:4 (1 cement: 4 coarse sand)DSR 2023- 13.4.1 |
| 88 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).DSR 2023- 4.1.8 |
| 89 | 25 mm nominal outer dia .Pipes.DSR 2023- 18.8.3 |
| 90 | 32 mm nominal outer dia .Pipes.DSR 2023- 18.8.4 |
| 91 | 40 mm nominal outer dia. Pipes.DSR 2023- 18.7.5 |
| 92 | 510x1040 mm bowl depth 250 mm.DSR 2023- 17.10.1.1 |
| 93 | Providing and fixing Sink Mixer as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-12903 |
| 94 | Providing & Placing of Looking Mirror pasted on wall with the help of silicon having edges beveled, all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge. Customized- Looking mirror (PSR)- IGP-SM-02 |
| 95 | Providing & Fixing of Concealed Stop Cock With Trims as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent MR- Concealed Stop Cock (PSR)- IGP-SM-03 |
| 96 | Providing & Fixing of Floor Drainer as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-1164 |
| 97 | Providing & Fixing of Wall hung Closet with Soft Close Seat Cover Fixed with Jumbo Bolts as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-19165 |
| 98 | Providing & fixing of Urinal With Sensor as per the approved design all complete as per drawing, specification and direction of engineer incharge.- Urinal With Sensor (PSR)- IGP-SM-06 |
| 99 | Providing and fixing Urinal Partition Make-Kerovit, as per the approved design all complete as per drawing, specification and direction of engineer incharge.-2783 |
| 100 | Providing & Fixing of Concealed Cistern With Push Plate as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent MR- Concealed Cistern With Push Plate (PSR)- IGP-SM-08 |
| 101 | Providing and fixing of Under Counter Basin as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent MR- Under Counter Basin |
| 102 | Providing and fixing of Half/Full Pedestal Basin as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-9500 |
| 103 | Providing & fixing of Single Lever Basin Mixer as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Jaquar/American Standard/Kerovit Eqivalent-9930 |
| 104 | Providing and fixing 2 Way Bib Tap as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent MR- 2 Way Bib Tap(PSR)- IGP-SM-13 |
| 105 | Providing & fixing Health Faucet as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-2151 |
| 106 | Providing and fixing of Angle Cock as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-2214 |
| 107 | Providing and fixing of Bottle Trap as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent- Bottle Trap-2 (PSR)- IGP-SM-16 |
| 108 | Providing and fixing of Toilet Paper Holder as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-2025 |
| 109 | Providing and fixing of Towel Ring as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-1392 (PSR)- IGP-SM-18 |
| 110 | Providing and fixing of Soap Dispenser as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-4048 |
| 111 | Providing and fixing of Waste Coupling as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-886 |
| 112 | Providing and fixing of Long Braided Hos Pipe as per the approved design all complete as per drawing, specification and direction of engineer incharge.-1164 |
| 113 | Providing and fixing of 110mm dia pipe 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc.-508 |
| 114 | Providing and fixing of 110mm dia Elbow 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc.-118 |
| 115 | Providing and fixing of 110mm dia 45 Degree Elbow, 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc.-143 |
| 116 | Providing and fixing of 110mm dia Socket, 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc.-127 |
| 117 | Providing and fixing of 110mm dia Tee, 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc.-266 |
| 118 | Providing and fixing of 110x110mm dia Nahani Trap, 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc.-207 |
| 119 | Providing and applying DRYTHANE 400 HE with Surfacer water proof coating 0.50 mm including DRYTHANE Standard 2.50 mm thick including surface cleaning etc all comp. all area as per direction of engineer in charge. (Sanction Rate for Kanpur Nagar Nigam)-115 |
| 120 | Taking out Sunken Portion Cinder & then Refilling after Water Proofing as per the approved design all complete as per drawing, specification and direction of engineer in charge MR-2550 |
| 121 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)DSR 2023- 12.45.1 |
| 122 | Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Dune (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 63%. The tile shall be laid on Armstrong Suprafine 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 8.8 Kgs/M2 & pull out strength of 100Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. ARMSTRONG SUSPENSION SYSTEM - Armstrong make Anchor Fastener, Hanger Wire 2.5mm dia, Hook Clip with J Wire assembly. Approved Makes - Armstrong, Shera, Nitco.-2350 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender