Tender For Provn Of Lpg Store In 57 Mtn Dou And Certain Revenue And Minor Work At Masimpur Mil Stn
Tender Value
45 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
17 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cachar → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Lpg Store In 57 Mtn Dou And Certain Revenue And Minor Work At Masimpur Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | B & R Division Items |
| 2 | Demolition of Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 3 | Surface dressing n. exc 15 cm deep and getting out in soft /loose soil complete all as specified and as directed. |
| 4 | Excavating over area n. exc. 1.50mtr in depth for foundation etc and getting out in soft/loose soil etc complete all as specified and directed. |
| 5 | Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of column, wall etc, not exc 10 sqm on plan and getting out in soft/loose soil etc complete all as specified and directed. |
| 6 | Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of column, wall etc, not exc 10 sqm on plan and getting out in hard and dense soil etc complete all as specified and directed. |
| 7 | Returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm all as specified. |
| 8 | Removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point all as specified. |
| 9 | Earth filling under floor incl spreading, levelling & well ramming including watering as required n exc . 25 cm thick complete all as specified and directed.(Note :- Earth obtained from relevant execavation items above mention is reused ) |
| 10 | Excavating in post holes each n exc 0.5 cum, getting out, in soft /loose soil, ramming earth filling or borken rubble mixed with earth around in layers nexc 25 cm watering and removing ssurfaces soil to distance nexc 50 m and making good surfaces all as specified and directed. |
| 11 | M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified. |
| 12 | M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified. |
| 13 | M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified. |
| 14 | M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified. |
| 15 | M&L for hardcore of broken stone gauge n exc 63mm, deposited, spread and leveled in layer n.exc 15cm thick, watered and rolled / rammed to a true surface all as specified and directed . |
| 16 | M&L for PCC (1:4:8), D2 using 40 mm graded stone aggregate as in foundations, sub-base,filling and mass concrete complete all as specified. |
| 17 | M&L for 150mm thick plain cement concrete (1:4:8) type D-2 using (40mm graded stone aggregate) as in Sub base of floor rough surface complete all as specified. |
| 18 | M&L for 100mm thick plain cement concrete (1:4:8) type D-2 using (40mm graded stone aggregate) as in Sub base of floor rough surface complete all as specified. |
| 19 | M&L for 75 mm thick cement concrete (1:4:8) type D-2 using (40mm graded stone aggregate) as in Sub base of floor rough surface complete all as specified. |
| 20 | Material and labour for cement concrete 75 mm thick PCC type C2 1:3:6 (40 mm graded aggregate) as in path , plinth protection, finished fair and even, laid in alternate bays/ panel and joints filled with bituminous mix of 1part bitumen and 3 part of sand complete all as specified and directed. |
| 21 | M&L for 75 mm thick plain cement concrete (1:3:6) type C-2 using (40mm graded stone aggregate) as in Sub base of floor rough surface complete all as specified and directed |
| 22 | M&L for 150mm thick plain cement concrete (1:2:4) type B-2 using (40mm graded stone aggregate) as in Sub base of floor rough surface complete all as specified. |
| 23 | M&L for Plain cement concrete (1:3:6) type C-1 (Using 20mm graded stone aggregate) as in surface channel and drain complete all as specified & directed. |
| 24 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends for etc complete all as specified and directed. |
| 25 | M&L for 50mm thick plain cement concrete (1:2:4) type B-0 using (12.50mm graded stone aggregate) as in flooring to receive the topping layers complete all as specified and directed |
| 26 | M&L for plain cement concrete (1:2:4) type B-0 using (12.50mm graded stone aggregate) as in fixing of hold fast , filling in hallow MS section etc complete all as specified and directed |
| 27 | M&L for providing and laying 25 mm thick mastic flooring conforming to IS 1195-1975 on concrete surface, the proportion of mixing of bitumen, lime stone powder, coarse and fine aggregate as bitumen IS 702(85/25) (15%), Coarse aggregate(15%), fine aggregate (60%) and lime powder (10%) shall confirm to IS 1195-96 with all necessary equipement complete all as specified and directed |
| 28 | M & L for forming contraction ( Dummy) joints 65mm deep X 10mm wide, filled with sealing compound of 'grade A' complete all as specified and directed by Engr-in-charge. |
| 29 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and as directed. |
| 30 | Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete all as specified and directed. |
| 31 | Use and waste Formwork to sides and soffits of floor or roof beam, beam hunching, girder, lintels, cantilever, shelves including supports, etc for rough finished flat surfaces of concrete complete all as specified and as directed. |
| 32 | Use and waste Formwork to soffits of suspended slabs such as roof slabs, landings and similar work, not exceeding 200mm thick (Horizontal or Sloping), for rough finished flat surface of concrete all as specified and directed. |
| 33 | Use and waste Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roof slabs etc incl fair finished surfaces n. exc 20cm wide and sides of RCC/PCC band in wall horizontal or sloping and similar work exc 10cm but n. exc 20cm wide complete all as specified and directed. |
| 34 | Material and labour for providing Reinforced Cement Concrete M-25 (Design Mix) using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed. |
| 35 | Material and labour for providing Reinforced Cement Concrete M-25 (Design Mix) using 20 mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 36 | Material and labour for providing Reinforced Cement Concrete M-25 (Design Mix) using 20mm aggregate as in slab supported on walls , beams, and column in floors, roof, landing, balconies, canopies, deck slab and in shelves and like etc comlpete all as specified and directed. |
| 37 | Material and labour for providing Reinforced Cement Concrete M-25 (Design Mix) using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5 m complete all as specified and directed. |
| 38 | Material and labour for 10mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 39 | Material and labour for Mild Steel TMT Bar 6mm dia and over up to 10 mm dia as in stirrups, spacers and binders as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed |
| 40 | M&L Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:6 Complete all as specified and as directed. |
| 41 | M&L for 5 mm thick rendering in cement mortar (1:3) of ceiling surfaces with finished fair and even without using extra cement complete all as specified. |
| 42 | M&L for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished fair and even complete all as specified. |
| 43 | M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick or concrete surface finished even and Smooth with out using extra cement all as specified. |
| 44 | M&L rendering 15 mm thick cement plaster in two layer Each of 10+5 mm thick on fair faces of brick wall or concrete surfaces in CM (1:4) & water proofing compound mixed with second layer @ 3% finished fair and even. (Note -W.P.C. shall be measured and paid separetly). |
| 45 | Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed. |
| 46 | Material and labour light shade Vitrified Ceramic tiles 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm and not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick screed bed or bedding layers in cement mortar 1:6 complete all as specified and directed. |
| 47 | M & L for 20 to 22mm thick chequered cement concrete tiles, area of each tile exceeding 0.06sqm but not exceeding 0.11sqm ,set, jointed and pointed in neat cement slurry in floors, with mixture of grey and white cement in equal including 20mm thick screed bed or bedding layers of cement mortar (1:6) for tiles complete all as specified & directed. |
| 48 | Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed. |
| 49 | Supply and fix Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 50 | Supply and fix Framed work such as grills, gratings, etc. with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 51 | Supply and fix Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 52 | Supply and fix MS screw bolts (machine made ) with hexagonal or square heads at one end & screwed the other or screwed both ends ,each screwed end to be fitted with washers & one hexagonal or square nut length of bolt n exc 5 cm long dia 5 to 10mm complete all as specified & as directed. |
| 53 | Supply and fix Steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming to IS.1161 - 2014 / IS.4923 - 1997 grade St.-210 complete all as specified and directed. |
| 54 | S&F plates (plain or chequered) channels, square cut or notched (ordinay and counter sunk) forming holes, without any attachment of Fe 410W (Gde-E -250) Quality 'B' complete all as specified and directed by Engr-in-Charge. |
| 55 | S & F Roof trusses (framed), trussed,purlins, crane gantries, rails ,posts and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats nuts bolts plates (plain or chequered) etc. |
| 56 | M&L for Rolled mild steel Framed work as in doors or gates of angle or other Section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Fe 410-W (Gde-E-250) Quality 'A' complete all as specified and directed by Engr-in-Charge. |
| 57 | M&L for Mild steel angle,flat work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. conforming to Fe -290-Gde E-165 complete all as specified & as directed. |
| 58 | Supply & Fixing MS round plain bars 10 mm dia ( Fe-410W (Gde E-250) Quality -A ) as in tie rod cut to length bend to shape as required for fixing of chain link fencing complete all as specified & as directed. |
| 59 | Supply only chain link MS galvanised fencing complete all as directed. |
| 60 | Fixing chain link fencing incl line wires any mesh size & type to any type of standards rails, straining bolts etc including provision of binding wire complete all as directed. |
| 61 | S&F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing's and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified & as directed Note: each line wire to be measured). |
| 62 | Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.0mm and fixed with stainless steel wire staples complete all as specified. |
| 63 | S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putting square nexc 0.5 sqm in each pane complete all as specified. |
| 64 | S&F 1mm thick MS Plain Sheet for Steel Doors or gates, ut to size, holes punched, or revited and fixed to wood or steel framing including bending, or turning up, mitred angles, etc as required complete all as specified |
| 65 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified. |
| 66 | Supply and Fixing of 15mm bore CPVC pipe SDR 11 with plain CPVC SDR 11fittings on wall/ ceiling or laying in floor complete all as specified. |
| 67 | Supply and Fixing of 20mm bore CPVC pipe SDR 11 with plain CPVC SDR 11fittings on wall/ ceiling or laying in floor complete all as specified. |
| 68 | Supply and Fixing of 25mm bore CPVC pipe SDR 11 with plain CPVC SDR 11fittings on wall/ ceiling or laying in floor complete all as specified. |
| 69 | M & L for Cutting existing steel tubing 15mm for alterations additions complete all as directed.Note : Each cut will be measured only once |
| 70 | M & L for Cutting existing steel tubing 25mm for alterations additions complete all as directed.Note : Each cut will be measured only once |
| 71 | M & L for Screwing existing steel tubing 15mm for alterations or additions complete all as specified and as directed.Note : Each Screwing will be measured only once |
| 72 | M & L for Screwing existing steel tubing 25mm for alterations or additions complete all as specified and as directed.Note : Each Screwing will be measured only once |
| 73 | S & F Rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) 1000 Ltr capacity hoisted and fixed in position all as specified in SSR Part I including connecting the overflow drain out, inlet and outlet pipes, tank nipple, elbow, bend, unions, sockets, etc including taking down old damaged water tank and disposing off complete all as specified and as directed. |
| 74 | Supply and fix in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 75 | Supply and fix in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 76 | Supply & Fixed Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) for 25 mm bore pipe complete all as specified and as directed. |
| 77 | M & L for preparation of newly plastered surfaces and applying three coats of white wash on wall complete all as specified and directed. |
| 78 | Material and labour for preparation of new or previously untreated wall surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @1.43 litre/10Sqm over and including priming coat of exterior primer applied @0.90 litre /10 Sqm over new surfaces complete all as specified and directed. |
| 79 | Material and labour for preparation of new or previously untreated wall surfaces and applying two coats of acrylic smooth exterior paint coloured shade @1.67 litre/10Sqm over and including priming coat of exterior primer applied @2.20litre /10 Sqm over new surfaces complete all as specified and directed. |
| 80 | Material and labour preparation of new and previously un-treated steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 81 | Material and labour preparation of new and previously un-treated steel and iron surfaces of any description n exc 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 82 | E & M Division items |
| 83 | M & L for concealed point wiring using FRLSH PVC insulated unsheathed multi strand copper conductor cable 1100 Volt grade 1.5 sqmm and including in stove enamelled concealed SS conduit terminated in and incl concealed pressed steel sunken box readily available (having wall thickness not less than 1.22 mm upto 200 x 300 mm box size & having wall thickness not less than 1.63mm beyond 200 x 300 mm) duly covered with 3mm bakelite sheet cover for fixing switches incl testing including 1.5 sqmm FRLSH PVC insulated unsheathed multi strand copper conductor earth wire drawn throughand making good to disturbed surface to match existing surface for One light point controlled by one 10/16 Amp switch complete all as specified and directed. |
| 84 | M & L for concealed point wiring using FRLSH PVC insulated unsheathed multi strand copper conductor cable 1100 Volt grade 1.5 sqmm and including in stove enamelled concealed SS conduit terminated in and incl concealed pressed steel sunken box readily available (having wall thickness not less than 1.22 mm upto 200 x 300 mm box size & having wall thickness not less than 1.63mm beyond 200 x 300 mm) duly covered with 3mm bakelite sheet cover for fixing switches incl testing including 1.5 sqmm FRLSH PVC insulated unsheathed multi strand copper conductor earth wire drawn throughand making good to disturbed surface to match existing surface for One socket point controlled by one 10/16 Amp switch complete all as specified and directed. |
| 85 | Supply & Fixing Switch FLAME PROOF rotary type with termination box in LM6, 6/16A, single pole 250V complete all as specified and as directed by the engr-in -charge. |
| 86 | Supply and fixing LED light fitting 1X16 Watt flame proof, CMRI certified recommended for gas/ vapor group of II-A & III-B, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed. |
| 87 | Supply & Fixing 30 W LED flame proof wellglass fitting in dia cast al housing with heat resistatnt toughened glass. made of aluminium alloy LM6, CIMFR certified ,recommended for gas /vapor group of IIA & IIB and zone 1&2 IP 65 protected complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed by the Engr-in -charge. |
| 88 | Supply & Fixing flame proof exhaust fan size of 380mm, 1440 RPM, 230 V including louvers 15\\" complete all as specified and as directed by the engr-in -charge. |
| 89 | Supply and fixing Flame proof switch socket & plug combined in LM6 cable termination box in LM6 16 A 250 V 2P+ Earth complete all as specified and as directed. |
| 90 | S & F Flameproof 4 way Junction Box, 100mm dia complete all as specified and directed. Cat No: SSPL/JB/105 of make Shyam Switchgear (P) Limited or equivalent make |
| 91 | S & F Flameproof SS Conduit Pipe 1000mm long complete all as specified and directed. Cat No: SSPL/FH/145 of make Shyam Switchgear (P) Limited or equivalent make |
| 92 | Supply and fixing wall mounted type 220 volt LPG gas leakage detector with digital screen for showing PPM having provision of external hooter / siren with relay wire including siren, all as specified and as directed. |
| 93 | S&F Flameproof Lighting Distribution Panel, SPN 6 way, complete all as specified and directed. Cat No: SSPL/CS/174 of Make Shyam Switchgear (P) Ltd. The distribution panel consist of the following:-INCOMING: (a) MCB, 2P, 16 Amp/25A (Make: L&T/Schneider) - 01 NoOUTGOING: (a) MCB, 1P, 6 Amp/10A (Make: L&T/Schneider) - 04 NosNote: Distribution panel shall have internal bus bar & wiring up to terminals. |
| 94 | Material and labour surface sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLSH cable of size 1.5 sqmm and one single core PVC insulated (unsheathed) multi strand copper conductor FRLSH cable of size 1.5 sqmm as in continuous earth wire drawn into and including sutaible dia stove enameled ERW MS conduit 20mm dia ISI marked complete with fittings and fixings accessories FIXED In surface of wall/ceilling/floors etc. complete all as specified and as directed.Note :- copper conductor 2 run of 1.5 sq mm and 1 run of 1.5 sq mm of copper earth wire along with MS conduit MS flexible conduit shall be measured as one lenth. |
| 95 | Material & Labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected with earth lead of 4mm dia galvanised iron by means of bolts, nuts and washers of galvanised iron or steel all as shown in elecrtical plate 5, of SSR Part I 2009 connected to earthing test point including excavation earth work PCC chamber RCC over 50mm thick with 8 mm dia bars, protection pipe, funnel etc including excavation, earth work, disposal of surplus soil to a distance not exceeding 50 m and protection pipe of 50mm bore GI Pipe light grade upto 7.5 metre and watering pipe of 20mm dia including testing on completion all as specified and directed. |
| 96 | Supply Lay and fix Copper strip 20x3.15 mm as roof/down conductor burried in ground /fix on wall with epoxy based insulator and screw /bolts, nuts & leads washers fixed on roof/wall . Epoxy insulators shall be properly fixed /grouted in PCC at every distance of 100cm apart. Note ;- 40 mm size epoxy insulator will be measured & paid separately |
| 97 | Supply and fix inspection box /test point of size 75 X75 X 25 mm made out of 16 SWG MS Box with tpo cover including provision of fixing two numbers epoxy insulators & insulating PVC sheet for incomming & PVC sheet for incoming & outgoing aluminium/GI strip for proper insulation etc , complete all as specified and directed. Epoxy Insulator will be measured & paid separately |
| 98 | Supply and fix air termination, single pointed Copper rod 12mm dia 300 mm long complete all as specified and directed |
| 99 | Supply and fix epoxy base insulator of size 40 mm height fixed on walls/PCC block on floor on MS angle /on towers etcall as specified and directed by Engr-in-Charge Please Enable Macros to View BoQ information |
| 100 | Supply and fix epoxy base insulator of size 40 mm height fixed on walls/PCC block on floor on MS angle /on towers etcall as specified and directed by Engr-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender