Tender For Special Repair To Various Building And Certain Revenue Work Under Ge 859 Ews
Tender Value
26.44 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
0 days left
EMD
53000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tawang → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Various Building And Certain Revenue Work Under Ge 859 Ews
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Jul-2026 | BOQ Corrigendum | BOQ | 29-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Wall panelling and similar work, complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L for Hallow PVC wall panel plain in colour PVC Sheet inclusive of solvent cement and fixing at site on PVC/metal frame including 5 mm fillets for wall panelling complete all as specified and directed by Engr-in-Charge. |
| 3 | Taking down chowkhats with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4.00 sqm each, complete all as specified and directed by Engr-in-Charge. |
| 4 | Taking down chowkhats with shutters (without taking off shutters from the frame) not exc 1.5 sqm each, complete all as specified and directed by Engr-in-Charge. |
| 5 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified and directed by Engr-in-Charge. |
| 6 | Supply only 4 mm thick glass sheet any shade tint glass , ordinary quality and glazing with rubber bedding in squre nexe 0.5 sqm in each pane complete all as specified complete all as specified and directed by Engr-in-Charge. |
| 7 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with requiredEPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 8 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for 4mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work in ceiling, complete all as specified and directed by Engr-in-Charge. |
| 10 | Dismantling boarding any description, fixed with any position with nails, complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L for 3mm thick cover fillet of standard hard board, 40mm wide and fixing with screws complete all as specified and directed by Engr-in-Charge. |
| 12 | Dismantling unframed work in fillets, rails, posts, rafters, purlins etc under 40sqcm in section, complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L for second class hard wood in scantling, clean sawn, timber framed and fixed, complete all as specified and directed by Engr-in-Charge. |
| 14 | Dismantling timber scantling 40 sqcm and over in section in any position framed work, complete all as specified and directed by Engr-in-Charge. |
| 15 | M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth, and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge. |
| 16 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) |
| 17 | S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including bracket High or low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed. |
| 18 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 19 | S&F in repair 25 mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 20 | M&L for preparation of old or previously untreated steel surfaces of any description, not otherwise described over 10cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide, zinc crome complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes set in CM 1:6 |
| 22 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded or pointed in any mortar complete all as specified and directed. |
| 23 | Dismantling of plain or corrugated steel sheeting any gauge, thickness as in roof covering complete all as specified and directed |
| 24 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 25 | M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 26 | Material and labour for preparation of old steel surfaces of any description, over 10 cm width or girth not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 27 | Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete, all as specified and directed. |
| 28 | S & F 30 mm thick flush shutters,solid core construction with block board core and plywood face panel, commercial type on both sides, complete all as specified and directed. |
| 29 | M&L for 2nd class hard wood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 30 | Hacking out old broken glass (any hickness, size, quality )from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones |
| 31 | S & F 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane. |
| 32 | S & F sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 33 | Supply and fix mild steel butt hinges, medium weight, cold rolled 100 mm size , complete all as specified and directed. |
| 34 | Supply and fix Aluminium anodized barrel tower bolts of extruded section, 150 mm long, complete all as specified and directed. |
| 35 | Supply and fix Aluminium anodized barrel tower bolts of extruded section, 100 mm long, complete all as specified and directed. |
| 36 | Supply and fix Aluminium handles, cast type, anodized, 150 mm size , complete all as specified and directed. |
| 37 | Supply and fix Aluminium handles, cast type, anodized, 125 mm size , complete all as specified and directed. |
| 38 | Supply & fix aluminium alloy, anodised, sliding door bolts 250mm size with hasp, staple (bolt type) and fixing clips of sheets , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc complete all as specified and directed. |
| 39 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 40 | M&L for Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed with CM (1:6) 15mm thick for laying floor tiles complete all as specified and directed. |
| 41 | Demolition of Concrete (Un reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 42 | M&L for 75 mm thick 1:3:6 type C2 ( using 40 mm graded stone aggregate) as , plinth rotection.finished even and smooth without using extra cement. |
| 43 | Demolition of stone, brick/PCC block masonry work built in cement mortar complete all as directed. |
| 44 | M&L for Providing precast cement concrete type B1 1:2:4 (20mm graded stone aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed)setting in mortar 1:6 ,complete, in walls |
| 45 | M&L for Rendering 10 mm thick CM (1:6) on fair faces in two layers of concrete surfaces of wall , finshing the surface even and smooth without using extra cement complete. |
| 46 | M&L for prep of newly plastered surfaces of walls and applying two coats of OBD over a coat of primer complete all as specified and as directed complete. |
| 47 | Dismantling wall and ceiling boards of any description including cover fillets complete all as specified and directed. |
| 48 | Material & labour for 2nd class hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails having sectional area not exc. 3 sqcm complete all as specified and directed |
| 49 | Dismantling Timber scantling with framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq cm in section , in any position all as specified and directed. |
| 50 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cmdeep and getting out in hard/dense soil. |
| 51 | M&L for Hard core, broken to gauge n exc 63 mm using broken stone or boulders complete all as specified and directed. |
| 52 | M&L for 100mm thick PCC type C-2, 1:3:6 (40mm graded aggregate) as in sub-base, floors and pavings etc complete all as secified and directed. |
| 53 | M&L Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes with CM 1:6 complete all as specifie as directed. |
| 54 | M&L for Cement concrete tiles 20cm x 20cm x 20mm or 300x300x20 mm thick, ma c h i n e pressed; set jointed and pointed in neat cement slurry in floors, and cut and polishedwith grey cement and pigment comlete all as secified and directed by Engr-In-Charge. |
| 55 | M & L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 56 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 57 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 58 | M & L for One light point or one fan point controlled by one switch with 1.5 sq. mm size FRLSH PVC insulated unsheathed single core multithreaded copper conductor cable 1100 volts grade incl 1.5 Sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drown through in and incl PVC casing capping with its accessories and PVC Boxes for fixing switches/sockets etc. |
| 59 | One socket outlet 5/3 pin 6 AMPS controlled by one switch on independent board. |
| 60 | M & L for One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size FRLSH PVC insulated unsheathed single core multithreaded copper conductor cable 1100 volts grade incl 1.5 Sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drawn through in and incl PVC casing capping with its accessories and PVC Boxes for fixing switches/sockets etc. |
| 61 | All as per item No 2 above but 3 pin socket out let 15/16 Amps on the independent Board all as spfd with single core unsheathed PVC insulated cable multistranded copper conductor of size 2.5 sq mm for phase & neutral & 2.5 sq mm for earth continuity conductor. |
| 62 | M & L for One 3 pin socket outlet, 15 Amps, independent, with cables 4 sq. mm size FRLSH PVC insulated unsheathed single core multithreaded copper conductor cable 1100 volts grade incl 4.0 Sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drawn through in and incl PVC casing capping with its accessories and PVC Boxes for fixing switches/sockets etc. |
| 63 | S&F Switch piano, flush type single pole, one way 5 Amp. |
| 64 | S&F socket outlet 2 in 1, 3 pin & 2 pin, 5/6 Amp, 240 volt. |
| 65 | S&F Switch socket combination 2 in 1, 5 A flush type. |
| 66 | S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type Universal. |
| 67 | S&F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body. |
| 68 | S&F Bell Ding Dong type, AC 230 Volts, Single pole. |
| 69 | Supply and fixing in repair slimest surface panel TRIM CLIPON PANEL SQUARE LED lights fitting 18 W LED 4000 K, 220V,AC decorative with driver, holder including LED panel light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete as specified. |
| 70 | S&F Bell Push, flush type, 5 Amp, AC-230 Volts, single pole. |
| 71 | Supply and fixing in repair LED street light fitting 30 Watt 230 V AC with best in class design & robust heat sink along with class leading IP,IK surge protection for long lasting performance with complete driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with all fixing arrangement all as directed and as specified. |
| 72 | S&F in repair sheet metal enclosure double door for MCB DB single pole and neutral 12 way with 200 Amps rated bus bar 240 volts double door (Metallic) type including taking down old Distribution Board and MCBs all as specified and directed . |
| 73 | Supply and fixing in repair LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete as specified. |
| 74 | S&F MCB SPN 40 to 63 AMP 240 volts 'C' series, 10 KA, 50 Hz. Make:- As approved Make of DB |
| 75 | S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for battern fittings complete. all as specified and directed by as engineer-in-charge. |
| 76 | S&F LED Bulb 9 watt cat part no LED ADORE PLUS 9W B22 WW 2 STAR LAMP complete all as specified and as directed by engineer-in-charge. |
| 77 | Supply and fixing LED lights fitting 1x 18W, 4 feet, 220V,AC decorative box type with driver, holder including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down old unserviceable light fitting complete. |
| 78 | S&F in repair sheet metal enclosure distribution box 4 way TPN 415 volts with suitable size of rated bus bar double door complete including connecting up all as specified . |
| 79 | Supply and fixing LED light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics including taking down old unserviceable light fitting any type complete with IP 65/66 protection complete. |
| 80 | Supply and fixing in repair 415V 10KA 'C' curve miniature circuit breaker TPN 40 To 100 AMP poles and current carrying capacity in the DB complete with connection testing and commissioning all as directed and as specified. |
| 81 | Supply and fixing in repair MCB 5- 32 Amp SP 240V, 10KA 'C' complete with connection testing and commissioning all as directed and as specified. |
| 82 | Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized GI wire 4.0 mm as earthing lead by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and provision of concrete pit in PCC (1:3:6) type C1, pre-cast including RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm, reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways, one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil, dismantling and taking out old earthing plate and necessary testing complete all as shown on electrical plate No 5 of SSR Part –I (2009). |
| 83 | S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 4.0 Core including taking down old one. |
| 84 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation of poles, etc. or for laying of cable, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft & loose soil. |
| 85 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm of any type of soil. |
| 86 | S&F in repair GI Pipe 50 mm bore, 'light grade',galvanised,with all fitting;laid in trenches. |
| 87 | S&Fin repair High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches of size 50 mm bore. |
| 88 | Dismantling and taking up or down old Unserviceable service cable and LT UG cable of any size complete all as specified and directed |
| 89 | Supply and laying or fixing or passing through pipeXLPE insulated, armouredheavy duty electric cable with aluminium conductor, 1100 volts grade of size 25 sqmm 2.0 core including taking out old unserviceable cable any type complete all as specified and directed by Engineer in charge. |
| 90 | S&F in repair Double walled corrugated (DWC) Pipe conforming to IS 14930(Part-II) Pipes of Outer dia 50 mm and innder dia 38mm including taking out old unserviceable pipeall as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender