Tender For Certain Repair To Charpoy Ms And Gi Pipe Hard Top Under Ge (East) Ferozepur Cantt
Tender Value
47 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
20 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Firozepur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair To Charpoy Ms And Gi Pipe Hard Top Under Ge (East) Ferozepur Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Charpoy GI pipe ply Top :Dismantling old unserviceable newar from charpoy GI pipe (Drawing No. FD-220) and supply and fix new 12mm thick plywood BWR grade, type AA, ISI Marked of required size as per drawing fixed with 75 mm long x 6 mm dia full threaded nut and bolts with washer on both sides by drilling 2 Nos of hole in each long rail and 2 Nos of hole on each short rails including tightening of charpoy and corners of plywood fixed on charpoy rounded off properly complete all as specified, shown on drawing and directed. |
| 2 | S&F mild steel flat iron strip of size 900mmx30mmx5mm thick cut to required size and welded below ply wood top on long rails and painting woverall surfaces with two coats of synthetic enamelled black paint over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and directed. |
| 3 | Dismantling old unserviceable long rail from existing frame of charpoy of GI pipe (Drawing No. FD-220) and supply and fix new long rail made out of 32mm bore galvanised iron pipe medium grade ISI marked including cutting, threading both ends and tightening etc complete all as specified, shown on drawing and directed. |
| 4 | Dismantling old unserviceable short rail from exiting frame of charpoy of GI pipe (Drawing No. FD-220) and fix of short rail made from old unserviceable retreived long rail retrieved from charpoy GI pipe against item No. 3 here-in-before after cutting, threading both ends and tightening complete all as specified, shown on drawing and directed. (Note:- one old retrieved long rail shall be used for convering into two short rails.) |
| 5 | Dismantling old unserviceable leg from existing frame of charpoy GI pipe (Drawing No. FD-220) and fix leg made from old unserviceable retrieved short rail retrieved from charpoy GI pipe against item No. 4 here-in-before including cutting and threading complete and provide hard wood blocks out of 35x35x40mm of first class hard wood to each leg of charpoy GI Pipe complete all as specified, shown on drawing and directed. (Note:- one old retrieved short rail shall be used for convering into one leg.) |
| 6 | Dismantling old unserviceable 32mm bore GI elbow three way medium grade from existing frame of Charpoy GI pipe (Drawing No. FD-220) and, supply and fix new GI elbow 32mm bore GI three way medium grade ISI marked complete all as specified, shown on drawing and directed. |
| 7 | Dismantling old unserviceable 32mmbore GI check nut medium grade from existing frame of charpoy GI pipe (Drawing No. FD-220) and, supply and fix new 32mmbore GI check nuts medium grade ISI marked complete all as specified, shown on drawing and directed. |
| 8 | Supply, fix and weld FMN clamps made out of mild steel flat iron iron to the legs of charpoy GI pipe (Drawing No. FD-220) complete all as specified, shown on drawing and directed. |
| 9 | Bed Hard Map :Dismantling old unserviceable Plywood from Bed Hard MAP FD/E6/MAP/8 (R) supply and fix new 12mm thick plywood BWR grade, type AA, ISI Marked of required size as per drawing fixed with suitable size nut and bolts with washer on both sides including drilling holes and tightening etc complete all as specified, shown on drawing and directed. |
| 10 | Dismantling old unserviceable 18mm thick Prelaminated particle board, exterior grade, from head rest of Bed Hard MAP and supply and fix new 18mm thick Prelaminated particle board, exterior grade, with teak wood beading/edging/lipping all round fixed with adhegisve and head less nails to head rest of Bed hard MAP complete all as specified, shown on drawing and directed. |
| 11 | Dismantling old unserviceable 18mm thick Prelaminated particle board, exterior grade, from foot rest of Bed Hard MAP and supply and fix new 18mm thick Prelaminated particle board, exterior grade, with teak wood beading/edging/lipping all round fixed with adhegisve and head less nails to foot rest of Bed hard MAP complete all as specified, shown on drawing and directed. |
| 12 | Dismantling old unserviceable 25mm x 25mm square hollow section 18 Gauge wall thickness mild steel tube in Bed hard Map and supply and fix new 25mm x 25mm square hollow section 18 Gauge wall thickness mild steel tube conforming to IS: 4923-1968 including cutting, welding, turning, bending etc and painting with one coat of red oxide zinc chrome primer and two coats of synthetic enamel paint black colour using sparay gun complete all as specified, shown on drawing and directed. |
| 13 | Dismantling old unserviceablemild steel Strip form Bed hard Map and supply and fix new 5mm thick mild steel Strip of size 50mm x 25mm including cutting, welding, turning, bending etc and painting with one coat of red oxide zinc chrome primer and two coats of synthetic enamel paint black colour using sparay gun complete all as specified, shown on drawing and directed. |
| 14 | M&L for preparation of old painted steel surface of Bed Hard MAP and painting with one coat of synthetic enamel paint black colour using sparay gun complete all as specified, shown on drawing and directed. |
| 15 | Charpoy with Hard Top :Dismantling old unserviceable Plywood from Charpoy with hard top FD/MAP-II/01 supply and fix new 12mm thick plywood BWR grade, type AA, ISI Marked of required size as per drawing fixed with suitable size nut and bolts with washer on both sides by drilling 2 Nos of hole in each long rail and 2 Nos of hole on each short rails and corners of plywood fixed on charpoy rounded off properly complete all as specified, shown on drawing and directed. |
| 16 | Dismantling old unserviceable 25mm x 25mm square hollow section 16 Gauge wall thickness mild steel tube charpoy with hard top FD/MAP-II/01 and supply and fix new 25mm x 25mm square hollow section 16 Gauge wall thickness mild steel tube conforming to IS: 4923-1968 including cutting, welding, turning, bending etc and painting with one coat of red oxide zinc chrome primer and two coats of synthetic enamel paint black colour using sparay gun complete all as specified, shown on drawing and directed. |
| 17 | Dismantling old unserviceable MS Strip form charpoy with hard top FD/MAP-II/01 and supply and fixing new 5mm thick MS Strip of size 50mm x 25mm including cutting, welding, turning, bending etc with one coat of black enamaled paint. Rest all as per drg and directed. |
| 18 | M&L for preparation of old painted steel surface of charpoy with hard top FD/MAP-II/01 and painting with one coat of synthetic enamel paint black colour using sparay gun complete all as specified, shown on drawing and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender