Tender For Repair / Maintenance Polishing Of Wooden Furniture For Otm, Unit Line, Offices & Other Area Under Ge Ranchi
Tender Value
35 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
17 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Polishing Of Wooden Furniture For Otm, Unit Line, Offices & Other Area Under Ge Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Chair Easy M&L for removing of unserviceable/broken parts without damaging of other parts of chair easy and supply and fixing following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD-358) |
| 2 | Supply & Fix Front/Rear leg of size 545x55x25mm. |
| 3 | Supply & Fix Front/Rear stiffener of size 510 x 50 x 25mm . |
| 4 | Supply & Fix Arms of size 610 x 65x25mm. |
| 5 | Supply & Fix Front & back rail of seat/back of size 510x50x25mm. |
| 6 | Supply & Fix Side rail of seat/back of size 575 x 70 x 40mm . |
| 7 | Supply and fixing in replacement of seat of Chair Easy made of 12mm thick plywood MR Gde and 75mm thick cushion of 32 density pasted on plywood and covered with leatherite fabrics/ tapestry cloth all as shown on drg and directed by Engr-in-Charge. |
| 8 | Description all as per above Srl item No. 1.06 here-in-before but for back . |
| 9 | Tightening of all parts/joints of entire Chair Easy with bamboo pins. |
| 10 | Supply and fixing with machine screw of triangular bracket of size 50x50x25mm of 1st class hard wood teak/shisham between legs and rails of Chair Easy. |
| 11 | Material and labour for French polishing to chair easy after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface upto glossy finish. |
| 12 | Supply & Fix nylon buffers with machine screw to legs of chair easy complete all as directed by Engineer-in-Charge. |
| 13 | Chair wooden bottom M&L for removing of unserviceable/broken parts without damaging of other parts of chair wooden bottom, supply and fixing following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD-285) |
| 14 | Rear leg of size 835x55x30mm. |
| 15 | Front leg of size 430x55x30mm. |
| 16 | Side/Front/Rear rails of size 445x65x30mm. |
| 17 | Back rest stiffner of size 405x50x15mm. |
| 18 | Stiffener of size 20 x 25mm (Side & Central one). |
| 19 | Triangular bracket of size 50x50x25mm machine cut of 1st class hard wood teak/shisham between legs and rails of Chair wooden bottom with machine screw. |
| 20 | Tightening of all parts/joints of whole Chair wooden bottom with bamboo pins. |
| 21 | Supply and fixing in replacement of seat of size 440 x 445mm x 6mm thick plywood BWR Gde as per IS:303 to seat of chair wooden bottom with machine screw complete all as specified in drg and as directed by the Engineer-in-Charge. (Make of Plywood:- Archidply(Gold)/Senply/ Greenply(Ecotech)/BTSP (Gold)) |
| 22 | Material and labour for French polishing to chair wooden bottom after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface till glossy finish. |
| 23 | Supply & Fix nylon buffers with machine screw to legs of chair wooden bottom complete all as directed by Engineer-in-Charge. |
| 24 | Hat stand with mirror M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge (FD-361/362) |
| 25 | Supply and fixing in replacement of Front ply of hat stand with mirror with teak face ply of size 330 x 710mm x 6mm thick plywood BWR Gde (Make of Plywood:- Archidply(Gold)/ Senply/ Centuryply) |
| 26 | Supply and fixing in replacement of back ply of hat stand with mirror with ply of size 330 x 710mm x 6mm thick plywood BWR Gde (Make of Plywood:- Archidply(Gold)/ Senply/ Centuryply) |
| 27 | Supply and fixing in replacement looking mirror of Hat stand with mirror with new looking mirror 5 mm thick of Make:- Saint Gobain / Modi Guard/Atul of size and shape as specified in drg and as directed by Engineer -in- Charge. |
| 28 | Supply and fixing in replacement of peg set of hat stand with mirror with new peg set of Brass. |
| 29 | Supply and fixing in replacement of hanging clip of hat stand with mirror with mild steel FI key plate |
| 30 | Material and labour for French polishing to hat stand with mirror after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface till glossy finish. |
| 31 | Table600x600x760mm without drawer : M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge. (FD-293) |
| 32 | Supply and fixing in replacement of top of table 600x600mm made of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet of make:- Greenlam/Archidlam/ Centurylam/ Samrat including 0.8mm thick PVC edge bending Tape of make:- Rehau/Fixin pasted with probond adhesive/glue alround alround to top to table with or without drawers, size and shape all as shown on drg. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply). |
| 33 | Supply and fixing in replacement of legs with new leg made of 1st class hard wood teak/shisham of size 60x30x740mm all as specified on drg. |
| 34 | Description all as per above Srl. Item No. 4.02 but stiffner (centre one) of size 60x20x600mm . |
| 35 | Description all as per above Srl. Item No. 4.02 but side stiffner of size 60x20x600mm. |
| 36 | Description all as per above Srl. Item No. 4.02 but long rails of size 60x20x600mm . |
| 37 | Description all as per above Srl. Item No. 4.02 but short rails of size 60x20x600mm . |
| 38 | S & F of 1st class hard wood teak/shisham wooden bracket machine cut of size 75 x 75x20mm with steel screw between the rail and legs of Table 900x600x760mm with/without drawer with tightening of all parts of Table. |
| 39 | M&L for applying french polishing with best quality french polish on exposed surfaces to table 600x600mm till glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. |
| 40 | supply and fix nylon rubber shoe. |
| 41 | Table 900x900x760mm without drawer (FD-291/88M) : M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge. (FD-88M) |
| 42 | Supply and fixing in replacement of top of table 900x900mm with new top made of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet of make:- Greenlam/Archidlam/ Centurylam/ Samrat including 0.8mm thick PVC edge bending Tape of make:- Rehau/Fixin pasted with probond adhesive/glue alround alround to top to table with or without drawers, size and shape all as shown on drg. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply). |
| 43 | Supply and fixing in replacement of legs made of 1st class hard wood teak of size 60x30x740mm and shape all as shown on drg. |
| 44 | Description all as per above Srl. Item No. 5.02 but stiffner (centre one) of size 600x20x900mm . |
| 45 | Description all as per above Srl. Item No. 5.02 but side stiffner of size 60x20x900mm. |
| 46 | Description all as per above Srl. Item No. 5.02 but rails of size 60x20x900mm . |
| 47 | S & F of 1st class hard wood teak/shisham wooden bracket machine cut of size 75 x 75x20mm with steel screw between the rail and legs of Table 900x900x760mm with/without drawer with tightening of all parts of Table. |
| 48 | Material and labour for french polishing with best quality french polish on exposed surfaces to table upto good looking after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. |
| 49 | supply and fixnylon rubbershoe. |
| 50 | Table dressing gents with Mirror (FD-230) : M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge. (FD-230) |
| 51 | Supply and fixing in replacement of looking mirror to table dressing gents with new looking mirror 5 mm thick of Make:- Saint Gobain / Modi Guard/Atul/Atul of size 760x380mm and shape as specified in drg and as directed by Engineer -in- Charge. |
| 52 | S & F in replacement of entire cabinet/box made of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet including 0.8mm thick PVC edge bending Tape (Make :- Rehau/Fixin ,pasted with probond adhesive/ glue all as shown on drg. Make of Plywood :- Archidply/ Greenply/ Senply/ BTSP(Gold)/ Samratply). |
| 53 | Supply and fixing in replacement of drawers to table dressing gents made of 18/19mm thick MR Gde plywood with 0.8mm thick laminated sheet on front side, 12mm thick of sides of drawer including with 6 mm thick MR Gde Plywood to bottom of drawers including almn anodised knob(dark brown) and all as shown on drg of Table dressing gents with mirror. |
| 54 | Supply and fixing in replacement of entire frame of mirror made of 1st class hard wood teak/shisham including 3mm thick F1 key plate for hanging of Mirror all as size and shape as shown on drg. |
| 55 | Supply and fixing in replacement of back ply of mirror made of 6mm thick MR Gde plywood size and shape as shown on drg. |
| 56 | Material and labour for french polishing with best quality french polish on exposed surfaces to table dressing gents upto glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. (FD-230) |
| 57 | Chair CB Steel FD-75 M M&L for Removing of unserviceable/broken parts of Chair CB steel with hard top without damaging of other parts of chair, supply and fixing new parts as shown on drg and specified. (FD-75(M) |
| 58 | S&F in replacement of the broken seat and replacing it with new seat woven with 2mm wide plastic cane of make:- Primier /Shah & Shah/B R Super brand as per Godrej pattern to be fixed with 04 Nos machine nuts and bolts of size 85 x 4 mm with washer to Chair CB Steel with arm/ without arm, frame of seat shall be made of best quality 2nd class seasoned hard wood shisham ,free from knots and infection all as specified and shown on drg and shall be painted with two coats of black synthetic enamel paint over a coat of wood primier. (FD-75(M). |
| 59 | Description all as per above Srl item No. 7.01 here-in-before but back of Chair CB Steel with arm/without arm. (FD-75(M). |
| 60 | Supply and fixing in replacement of MS flat iron cleat made of 50 x 25 x 3mm under the seat & back of chair CB steel with/without arm with electric welding all as directed by Engr-in-Charge. |
| 61 | Supply and fixing in replacement of arm to chair CB steel with arms of best quality Shisham hard wood, free from knots, infection with 02 Nos steel screw as per drg duly painted with two coats of black synthetic enamel paint over a coat of wood primer and as per directed by Engr-in-Charge. (FD-75(M). |
| 62 | Material and labour for painting to frame of chair CB Steel with arms/without arms with synthetic enamel olive green paint including preparation of surface with rubbing with emery paper and providing 02 Nos PVC cap at top of seat frame of MS pipe and 04 Nos PVC shoes/toes with steel screw at bottom of frame of MS round pipe as specified and directed by Engineer-in-Charge. (FD-75(M). |
| 63 | Table 900x900x760mm steel (FD-1009) M&L for Removing of unserviceable/broken parts of Table of all size without damaging of other parts of Table, supply and fixing new parts as shown on drg and specified. (FD-1009) |
| 64 | Material and labour for Repair and painting to frame of Table 900x900x760mm with synthetic ename Grey/ OG paint including preparation of surface with rubbing with emery paper as specified and directed by Engineer-in-Charge. |
| 65 | Supply and fixing in replacement of top of table 900 x 900 x 760mm steel with new one made of 18mm thick MR Gde plywood as per IS:303 of make:- Greenply/Archidply/ Senply/ BTSP(Gold) covered with 0.8mm thick laminated sheet of make:- Greenlam/Archidlam/ Centurylam/ Merino/Samrat including 0.8mm thick PVC edge bending Tape of make:- REHAU/ Fixin pasted with probond adhesive /necessary glue alround to top of table all as shown on drg and as directed by Engineer -in-Charge. |
| 66 | Supply and fixing in replacement of legs and stiffeners of table 900 x 900 x 760mm with new legs made of 25mm square conduit pipe 1.6mm wall thickness of make:- Appolo/Nizon or ISI mark duly electric welding all around of pipe complete size and shape all as shown on drg and directed by Engr-in-Charge. |
| 67 | Supply and fixing new H type stiffener for jointing legs of 25mm square conduit pipe of 1.6mm wall thickness of make:- Appolo/Nizon or ISI mark shall be welded all around pipe to support the legs of the table at appropirate height approx 100mm high from the bottom of legs all as directed by Engineer-in-Charge. |
| 68 | supply and fix pvc shoe. |
| 69 | Table bed side Wooden (FD-276/248) M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge. (FD-276/248) |
| 70 | Supply and fixing in replacement of Top of table bed side of size shown & specified in drawing of 18mm thick made of MR Gde plywood as per IS:303 of make:- Greenply/ Senply/ BTSP (Gold) covered with 0.8mm thick laminated sheet both side of make:- Greenlam/ Centurylam/ Merino/Samrat including 0.8mm thick PVC edge bending Tape of make:- REHAU/ Fixin pasted with probond adhesive /necessary glue alround to top of table bed side all shape and size as specified and shown on drg. |
| 71 | Description all as per above Srl item No. 9.01 here-in-before but sides of Table bed side made out of 12mm thick ply shape and size all as specified and shown on drg. |
| 72 | Description all as per above Srl item No. 9.02 here-in-before but shelf of Table bed side shape and size all as specified and shown on drg. |
| 73 | Description all as per above Srl item No. 9.02 here-in-before but back of Table bed side made of 6mm thick MR Gde plywood shape and size all as specified and shown on drg. |
| 74 | Material and labour for french polishing with best quality french polish on exposed surfaces to Table bed side upto glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. |
| 75 | Form with /without back (FD- 77M / 78M/ 1027) M&L for Removing of unserviceable/broken parts of Form with / without back without damaging of other parts of Form with / without back, supply and fixing new parts as shown on drg and specified. (FD-77M/ 78M/ 1027) |
| 76 | Supply and fixing in replacement of legs and stiffeners of form withback/without back with new legs & stiffners made of 25mm square conduit pipe 1.6mm wall thickness of make:- Appolo/Nizon or ISI mark duly electric welding all around of pipe complete size and shape all as shown on drg and directed by Engr-in-Charge. |
| 77 | M & L for Repair and painting to frame of Form with/without back steel with synthetic enamel Black paint after the preparation of surface with emry paper remove rust and dust over a coat of primer all as specified and as directed by Engr-in-Charge. |
| 78 | S&F in replacement of 25mm thick wooden plank of size 1800x255mm made out of second class hard wood sal/hollock for seat of Form with /without back size and shape all as shown on drg and directed by Engr-in-Charge. |
| 79 | All as per Srl item No. 10.03 here-in-before but back of the form of size 1800x150x19mm thick of form with back. |
| 80 | Supply & Fix PVC Shoes |
| 81 | Bookshelf open large/Small steel :M&L for Removing of unserviceable/broken parts of Book case steel four doors without damaging of other parts & supply and fixing new parts as shown on drg and specified. (FD-69M) |
| 82 | Supply and fixing by iron welding in replacement of existing unserviceable Angle Iron of Book shelf large with new Angle Iron made of 5mm thick Iron of make:- TATA/JINDAL/SAIL . Shown as per drawing and as directed by engineer -in- charge |
| 83 | Description all as per above ser no. 11.01 but for book shelf small steel |
| 84 | Supply and fixing by iron welding in replacement of existing unserviceable shelf of Book shelf large/small with new Shelf made of 0.9mm thick M.S/CRCA sheet of make:- TATA/JINDAL/SAILShown as per drawing and as directed by engineer -in- charge |
| 85 | Spray painting to book shelf open large/small steelwith synthetic enamel mettalic spray paint internaly and externaly portion, after removing of rusted/damage paint with paint remover and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook/revetting as required or welding, complete all as specified and directed by Engineer-in-Charge |
| 86 | Rack adjustable 6 tier :M&L for Removing of unserviceable/broken parts of Rack adjustable 6 tier without damaging of other parts & supply and fixing new parts as shown on drg and specified. (FD-1038/106 (M) |
| 87 | Supply and fixing by iron welding in replacement of existing unserviceable Angle Iron of Rack adjustable 6 tier with new Angle Iron made of 5mm thick Iron of make:- TATA/JINDAL/SAIL . Shown as per drawing and as directed by engineer -in- charge |
| 88 | Supply and fixing by iron welding in replacement of existing unserviceable shelf of Rack adjustable 6 tier with new Shelf made of 0.9mm thick M.S/CRCA sheet of make:- TATA/JINDAL/SAILShown as per drawing and as directed by engineer -in- charge |
| 89 | Spray painting to Rack adjustable 6 tier with synthetic enamel mettalic spray paint internaly and externaly portion, after removing of rusted/damage paint with paint remover and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook/revetting as required or welding, complete all as specified and directed by Engineer-in-Charge |
| 90 | Rack steel adjustable 1830x760x1905 : M&L for Removing of unserviceable/broken parts of Rack steel adjustable without damaging of other parts & supply and fixing new parts as shown on drg and specified. (FD-129 (M) |
| 91 | Supply and fixing by iron welding in replacement of existing unserviceable Rack steel adjustable with new Angle Iron made of 5mm thick Iron of make:- TATA/JINDAL/SAIL . Shown as per drawing and as directed by engineer -in- charge |
| 92 | Supply and fixing by iron welding in replacement of existing unserviceable shelf of Rack steel adjustablewith new Shelf made of 0.9mm thick M.S/CRCA sheet of make:- TATA/JINDAL/SAILShown as per drawing and as directed by engineer -in- charge |
| 93 | Spray painting to Rack steel adjustable with synthetic enamel mettalic spray paint internaly and externaly portion, after removing of rusted/damage paint with paint remover and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook/revetting as required or welding, complete all as specified and directed by Engineer-in-Charge |
| 94 | Rack Side 3/4 space with Tray :M&L for Removing of unserviceable/broken parts of Rack steel adjustabler without damaging of other parts & supply and fixing new parts as shown on drg and specified. (DB-1031) |
| 95 | Supply and fixing by iron welding in replacement of existing unserviceable Rack steel with new Angle Iron made of 5mm thick Iron of make:- TATA/JINDAL/SAIL . Shown as per drawing and as directed by engineer -in- charge |
| 96 | Supply and fixing by iron welding in replacement of existing unserviceable Rack steel with new Shelf made of 0.9mm thick M.S/CRCA sheet of make:- TATA/JINDAL/SAILShown as per drawing and as directed by engineer -in- charge |
| 97 | Spray painting toRack steel with 3/5 shelveswith synthetic enamel mettalic spray paint internaly and externaly portion, after removing of rusted/damage paint with paint remover and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook/revetting as required or welding, complete all as specified and directed by Engineer-in-Charge |
| 98 | Stool steel305x305x510mm :M&L for Removing of unserviceable/broken parts of stool steel without damaging of other parts & supply and fixing new parts as shown on drg and specified. (FD-81(M) |
| 99 | Supply and fixing by iron welding in replacement of existing unserviceable leg of stool steel with new leg Iron made of 3mm thick Iron of make:- TATA/JINDAL/SAIL . Shown as per drawing and as directed by engineer -in- charge |
| 100 | Supply and fixing by iron welding in replacement of existing unserviceable Top ofstool steel with new new top made of1.6 mm thick M.S/CRCA sheet of make:- TATA/JINDAL/SAILShown as per drawing and as directed by engineer -in- charge |
| 101 | Spray painting to Rack steel adjustable with synthetic enamel mettalic spray paint internaly and externaly portion, after removing of rusted/damage paint with paint remover and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook/revetting as required or welding, complete all as specified and directed by Engineer-in-Charge |
| 102 | Trestle store room steel :M&L for Removing of unserviceable/broken parts of trestle store room steel without damaging of other parts & supply and fixing new parts as shown on drg and specified. (FD-1043) |
| 103 | Supply and fixing by iron welding in replacement of existing unserviceable iron strip of trestle store room steel with new Iron strip wherever require made of 50mmx6mm thick MS Iron of make:- TATA/JINDAL/SAIL . Shown as per drawing and as directed by engineer -in- charge |
| 104 | Spray painting to Trestle store room steel with synthetic enamel black/OG spray paint internaly and externaly portion, after removing of rusted/damage paint with paint remover and providing putty after removing denting and making good of bends surfaces if any complete all as specified and directed by Engineer-in-Charge |
| 105 | Book case steel four doors :M&L for Removing of unserviceable/broken parts of Book case steel four doors without damaging of other parts & supply and fixing new parts as shown on drg and specified. (FD-1028) |
| 106 | Supply and fixing by iron welding in replacement of existing unserviceable Base of Book case steel four doors to make it stable for standing made of 0.9mm thick M.S/CRCA sheet of make:- TATA/JINDAL/SAIL duly spray painted with synthetic enamel paint two coats over a coat of red oxide primer. |
| 107 | Supply and fixing by in replacement of existing unserviceable lock of Book case steel four doors with new MS lock 4 lever of approved best quality with comman key for all as directed by Engr-in-Charge. (Make of Lock:- Lico/Reena/Harrison) |
| 108 | Description all as per above ser item No 17.02 here-in-before but handle mild steel CP 125mm long S Type as per sample as approved forBook case steel four doors all as directed and shown on drg. |
| 109 | Supply and fixing in replacement of existing unserviceable door of Book case steel four doors , made of M.S/CRCA sheet of make:- TATA/JINDAL/SAIL of 0.9mm thick bend to shape and size as shown on drg. |
| 110 | Supply and fixing in replacement of existing unserviceable 5mm thick plain glass for door of Book case steel four doors , shape and size as shown on drg. |
| 111 | Spray painting to book case four door with synthetic enamel mettalic spray paint internaly and externaly portion, after removing of rusted/damage paint with paint remover and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook/revetting as required or welding, complete all as specified and directed by Engineer-in-Charge. |
| 112 | Material and labour for French polishing to the following items after removing the old polish from emery paper with grinder machine and prepration of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface including preparation of old polished surfaces complete all as directed by Engineer-in-Charge. |
| 113 | Almirah large wooden DB-4118/4042/4116 |
| 114 | Almirah Medium Wooden DB-4042/2969 |
| 115 | Almirah M/U FD-93 (M) |
| 116 | Bed Ply Top FD-246 |
| 117 | Book shelf open large wooden FD-237 |
| 118 | Chair Dining Cushion Map FD/MAP-II/04 |
| 119 | Chair Easy FD-229 |
| 120 | Chair Dining FD-279 |
| 121 | Chair Writing FD-280 |
| 122 | Sofa Set (05 Seater) FD-281 |
| 123 | Sofa Set (04 Seater) FD-281 |
| 124 | Table Dining 06 person FD/MAP/-II/03 |
| 125 | Table peg FD-277 |
| 126 | Table writing FD-275 |
| 127 | Teapoy FD-278 |
| 128 | Table 3'x2' without drawer FD-284 |
| 129 | Material and labour for painting to the Trestle store room Wooden after removing the old polish from emery paper with grinder machine and prepration of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface including preparation of old paint surfaces & paint with black / OG colour wood paint over a coat of colour primer complete all as directed by Engineer-in-Charge.FD-86(M) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender