Tender For Repair To Boundary Wall Alongwith Barbed Wire Fencing In Kendriya Vidalaya No. 02 At Af Stn Kalaikunda
Tender Value
2.30 Crore
Estimated cost
Bid Submission
05 Aug 2026
23 days left
EMD
3.05 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur West → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Boundary Wall Alongwith Barbed Wire Fencing In Kendriya Vidalaya No. 02 At Af Stn Kalaikunda
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 2 | Demolition of reinforced cement concrete of any description and in any position not otherwise sepcifically provided for including reinforcement cut as required to facilitate demolition, complete all as specified and as directed. |
| 3 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar etc., complete all as specified and as directed. |
| 4 | Excavation in trenches, n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and as directed. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil, complete all as specified and as directed. |
| 6 | Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 7 | Removing excavated soil to a distance exc. 50 m but n. exc. 100 m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed. |
| 8 | M&L for PCC 1:3:6 (type C-2) (using 40 mm graded aggregate) as in foundation filling and mass concrete, complete all as specified and as directed. |
| 9 | M&L for RCC M-25 (Design mix) (using 20mm graded crushed stone aggregate) as in foundations, including raft, footings, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.(Note: Formwork and Reinforcement shall be measured and paid separately). |
| 10 | M&L for RCC M-25 (Design Mix) (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and as directed |
| 11 | M&L for RCC M-25 (Design Mix) (using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed |
| 12 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter on flat surface, for rough finished surfaces of concrete, complete all as specified and as directed. |
| 13 | Use and waste of formwork to sides of pillars, posts, piers, column and stanchions, etc. on rough finished surface of concrete, in square, rectangular or polygonal, complete all as specified and as directed. |
| 14 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. on flat surface, for rough finished surface of concrete, complete all as specified and as directed. |
| 15 | M&L for brickwork with subclass 'B' bricks old size, straight or curved on plan exc 6m mean radius built in CM 1:6 (except brick), complete all as specified and as directed. |
| 16 | M&L for brick work with fly ash brick in CM 1:6 straight or curved on plan exc 6 m mean radius, complete all as specified and as directed. |
| 17 | M&L for 15mm thick rendering on brick surfaces or concrete surfaces in CM (1:4) finishing the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 18 | M&L for preparation of newly plastered surface of wall and applying two coats of cement based paint over a coat of primer, complete all as specified and as directed. |
| 19 | S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (as in horizontal support to tie up chain link), complete all as specified and as directed. |
| 20 | S&F mild steel TMT bars 5 mm dia and over upto and including10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (as in horizontal support to tie up chain link), complete all as specified and as directed. |
| 21 | S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured), complete all as specified and as directed. |
| 22 | M&L for preparation of new or previously untreated surfaces of steel exceeding 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over and including one coat of red oxide zinc chrome primer, complete all as specified and as directed |
| 23 | S&F in mild steel works in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling ,bolting or riveting etc and similar works conforming to Fe-290 (Gde-E-165), complete all as specified and as directed. |
| 24 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed. |
| 25 | M&L for framed work as in ornamental doors or gates of angle or other section with gusset plates, rails, braces etc. complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete confirming to Fe-450 Gde- E165 complete all as specified and directed. |
| 26 | S&F framed work such as for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 27 | EXTERNAL ELECTRIFICATIONM&L for providing sand cushioning for protection of UG cable (8 cm deep before laying & 15 cm above the top edge of cable after laying) in trenches with dry (coarse) sand approved quality including filling, spreading and punning down to desired thickness complete all as specified and as directed.NOTE : Punned thickness only shall be considered for payment purpose. |
| 28 | M&L for laying well burnt old size fly ash bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over electric cable for protection complete all as specified and as directed. |
| 29 | M&L for 50 mm bore dia steel tubing light grade, galvanised, ISI marked, with all fitting, laid in trenches including connecting with existing lines, complete all as specified and as directed. |
| 30 | Supply, laying, jointing and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 10 sqmm 4core, wire armoured/PVC insulated armoured cable alongwith fixing and connecting accessories etc complete all as specified and as directed.NOTE: Excavation, earth work, sand cushioning, protection brick and pipe shall be measured and paid seperately under respective items. |
| 31 | M&L for security light bracket made out of GI pipe of light grade 1.6 RM x 40 mm dia for inserting of light fitting, properly shaped, bended & fixed on the pole through MS flat by nut, bolt & washer of suitable sizes, complete all as specified and as directed. |
| 32 | Supply and fixing LED street light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 volts, delivering lumen equal to/greater than 6000 lumen, system wattage 60 Watt, ingress protection IP-66 with all accessories, complete all as specified and as directed. |
| 33 | S&F loop in loop out fuse junction box of internal dimention 250 x 200 x 100 mm made of FRP sheet with weather proof canopy and locking screw fitted with and including 50 Amp rated 4 way connectors for 3 phase and neutral incoming/outgoing, mounted in the box, fixing on street pole/rail poles including necessary aluminium clamps, suitable glands, lugs and GI nut, IS code-11731, IS code-10192 and bolt, protection of IP-55, complete all as specified and as directed. |
| 34 | S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area of 6 sqmm 2 core for gate light fitting complete all as specified and as directed. |
| 35 | M&L for flexible PVC inslulated multicore FR PVC sheathed multistranded copper condutor cable 1.5 Sqmm x 3 core for voltage grade upto 1100V conforming to IS 694:2010 for connection of light fitting from junction box from over head conductors to fitting, complete all as specified and as directed |
| 36 | Supply and installation steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP - 31 (9.00 metres long) including dismatling, painting all external exposed steel surface with two coats of aluminium paint over a coat of red oxide zinc chrome primer and all internal and external surfaces in contact with concrete with two coats of black bituminous paint, complete all as specified and as directed. (Note :- Excavation, PCC foundation and coping shall be measured and paid separately.) |
| 37 | M&L for PCC 1:4:8 type D2 (40mm graded aggregate) in foundation of poles/stay and filling of mass concrete including providing necessary form work complete all as specified and as directed. |
| 38 | M&L for PCC 1:2:4 type B1 (20mm graded aggregate) as in coping of poles/stay including providing necessary form work complete all as specified and as directed. |
| 39 | S&F non metallic PVC medium grade conduit 20 mm dia, ISI marked for drawing aluminium/copper conductor cable between pole junction box and light fitting including fixing clamp made of GI strips and nut bolt (minimum 3 clamps in each pole to be provided), complete all as specified and as directed. |
| 40 | S&F in replacement of new generation LED 25 W post top lantern, energy saving, environment friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with IP66 protection high power LED as light source by using 2 core PVC insulated cable aluminium conductor 2.5 Sqmm approx 2m length, complete all as specified and as directed. |
| 41 | Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine for HDPE pipe upto 150mm dia suitable for 0.4 Mpa working pressure, complete all as specified and as directed. |
| 42 | M&L for earthing complete with galvanised steel earth plate 600mm x 600mm x6mm thick elecrode and 4 mm dia galvanised iron wire as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to GI wire 4mm dia as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and connected to board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 15mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I (2009) complete all as specified and directed. |
| 43 | S&F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 2 Way, 2 Modules, including 01 SPN 20 Amps, 10 KA, 230 Volt, 'C' Curve, single door without bus bar, enclosure made up of CRCA sheet steel RAL 9003 powder coated, IP 30, IEC-61439, IS-13032 & IS-8623, complete all as specified and as directed. |
| 44 | Note:- Schedule of cedit (Sch 'A' Part- II) amount of Rs 2,45,450.00 shall be deducted from the total quoted amount of BOQ. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender