Tender For special Repair Of Bldg No P-2054, P-2059 & P-2060 At Mh Hisar Under Ge (W) Hisar
Tender Value
38.54 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
16 days left
EMD
77100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Bldg No P-2054, P-2059 & P-2060 At Mh Hisar Under Ge (W) Hisar
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutter, without taking off shutter from the frames not exc 1.5 Sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) complete all as specified and directed. |
| 2 | Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) complete all as specified and directed. |
| 3 | S&F Powder coated Anodised aluminium frame for doors, frame and shutter for sliding windows (Three panels, two for glass pane and one for wire mesh), ventilators with one or more rebates including joining cleat and rubbers as required for fixing etc complete all as specified and directed. |
| 4 | S&F Powder coated Anodised aluminium sliding windows shutters, aluminium section weighing 0.45 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing,, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed.Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid separately. |
| 5 | S&F Powder coated Anodised aluminium door, shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc complete all as specified and directed.Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid separately. |
| 6 | S & F Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in windows and wooden shutters complete all as specified and directed. |
| 7 | S&F powder coated aluminium deco grill fixed to powder coated windows complete all as specified and directed. |
| 8 | S&F door closer Aluminium (Die cast) body hydraulic regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed. |
| 9 | S&F Floor door stopper of aluminium alloy body 150 mm long with rubber shoes fixed in repair complete all as specified and directed. |
| 10 | S&F 4.8mm thick tinted sheet glass ordinary quality and glazing with oil putty/ rubber bidding in square exc 0.5sqm in each pane complete all as specified and directed. |
| 11 | S&F 4.8 mm thick tinted sheet glass ordinary quality and glazing with oil putty/ rubber bidding in square n exc 0.5sqm in each pane complete all as specified and directed. |
| 12 | S&F as in brass Mortice lock,vertical type, 4 lever size 100 mm suitable for aluminium door complete all as specified and directed. |
| 13 | S&F in Repairs 20 mm dia Curtain Rod stainless steel Decorative pattern colour including all fittings like knobs, hooks etc) as approved by GE complete all as specified and directed. |
| 14 | S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the hold fast notch/disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregate) and making good the plaster of wall in CM 1:6 complete all as specified and directed. |
| 15 | S & F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the hold fast notch/disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregate) and making good the plaster of wall in CM 1:6 complete all as specified and directed. |
| 16 | M&L 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003. The shutter shall be fitted to chowkhats complete all as specified and directed. |
| 17 | M&L 35mm Glazed and skeleton shutters second class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters complete all as specified and directed. |
| 18 | M&L for Preparing new wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 19 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed 150 mm complete all as specified and directed. |
| 20 | S&F aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clip of sheet,cast or extruded section, bolt not less than 16 mm dia, 300 mm long complete all as specified and directed. |
| 21 | S&F aluminium handles extruded fabricated type anodized of size 125mm complete all as specified and directed. |
| 22 | S&F 100mm Butt hinges medium weight, cold rolled SS and fixed complete all as specified and directed. |
| 23 | M&L plain HDHMR (High Density High Moisture Resistant) solid Board ,18/19 mm thick , balancing white lamination including 1mm thick approved sunmica on external visible faces and as directed by Engr-in-charge, including pasting with solvent chemical as required at site or fixed with screws complete as in Kitchen Cupboard, room cupboard ,shelves / partition including fixing arrangement on walls and including taking down of old unserviceable cupboard complete all as specified and directed. |
| 24 | S&F for stainless steel modular Kitchen basket as required size for 17”x20” ht 6” for cutlery (bowl, tumbler and like) with wired bottom using 6mm rod of grade 304 stainless rod as per approved design and pattern incl necessary drawer slides of required size and chromium plated folding handles 75mm size for drawers complete all as specified and directed. |
| 25 | Description all as per item 24.00 above but with plain bottom for ht 4\\" cutlery (spoon, knife and like) complete all as specified and directed. |
| 26 | Description all as per item 24.00 above but ht 8” for plates/thali complete all as specified and directed. |
| 27 | M&L, 20mm thick granite stone slabs over and including 15 mm thick screed layer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone including rubbing & polishing, including dismantling of existing stone, complete all as specified and directed. |
| 28 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 , including dismantling of existing stone, complete all as specified and directed. Note : Single piece tiles will be placed on the surface of stair case tread area. |
| 29 | Grinding and polishing of existing kota stone floor as directed by Engineer-in-Charge complete all as specified and directed. |
| 30 | M&L for 100mm Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified and directed. |
| 31 | M&L Providing and laying 60mm thick factory made hamfered edge cement concrete paver block of M-30 grade with approvedcolour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness& size/ shape, made by table vibratory method using PU mould, laid in requiredcolour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ layingof inter locking paver blocks into the sandbedding layer through vibratory compaction by using plate vibrator, fillingthe joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; including dismantling of existing stone or tiles, complete all as specified and directed. |
| 32 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 33 | S&F Anodised aluminium snap grid framed work for false ceiling and including hangers 6mm dia G.I (upto 1200mm long ) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40x3mm size 60mm long and expansion hold fastener 12.5mm dia 40mm long, including dismantling of old frame work, complete al as specified and directed. |
| 34 | S&F False ceiling with calcium Silicate board, perforated type, and acoustic purpose, factory made matt finish surface, 600mm x 600mm in size and 12mm thick, including dismantling of old board any type, complete all as specified and directed. |
| 35 | S&F hollow PVC wall paneling, super strong quality single side prelaminated with flat or fancy patterned on laminated side, incl PVC 'L' and 'U' sections for finishing of corners and ends etc inclusive of fixing with screw or with solvent cement required at site on walls, including dismantling of old wall paneling any type, complete as specified and directed. |
| 36 | Dismantling of Brick tiles or terracing tiles, single layer on roof and removing complete all as specified and directed. |
| 37 | Demolition of Mud in roofs, any thickness,including plastering and leeping (whether full thickness removed or only a part there of) complete all as specified and directed. |
| 38 | M&L for cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate in padding ,levelling course and the like finish even and Fair 50mm average thickness or as required at site including preparation of RCC roof surface(old or new) with wire brush , drying and cleaning top remove loose particles, filling the cracks by crack filler complete all as specified and directed. |
| 39 | M&L for 15 mm thick plaster on roof floor with CM 1:3 with WPC having proper smooth finish and proper slop complete all as specified and directed. |
| 40 | M&L of five layered 3mm thick APP ( Atactic Polypropylene) modified prefabricated bituminous water proofing membrane reinforced with glass fibre matt treatment and upperside of memberane thermally insulated with white mineral gravel finish, uniformly embedded during manufacturing process shall be laid dry torch application, side coverlaps shall be 75 mm and end slab shall be 100 mm and all over laps and joints shall also be sealed by torch application , complete all as specified and directed. |
| 41 | M&L for Providing, cement concrete of 1:3:6 of Type C-1 20mm Graded aggregate in roof kerbs (Coving) , rounded or chamfered on edges complete all as specified and directed. |
| 42 | S&F Factory made powder coated Steel windows/ventilators (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed. |
| 43 | S&F Factory made powder coated Steel windows/ventilators (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed. |
| 44 | S&F Acrylic transparent sheets 3mm thick in square / rectangular area of each pane not exc 0.5 sqm and fixed /lock with window frame by using PVC snap beading with necessary self-tapping riveting / screwing and suitable method with and including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 45 | Providing of guard bars in window and ventilator of mils steel or iron Fe-290 Gde E-165, complete all as specified and directed. |
| 46 | M&L glazed ceramic coloured tiles, (350x450)x7mm / (350x250)x7mmthick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:4 set & joined in neat cement slurry and pointed in coloured cement to match, including dismantling of existing tiles, complete all as specified and directed. |
| 47 | S&F non skid ceramic coloured tiles 7 to 8 mm thick, joint free (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors, over and including 15mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match, including dismantling of existing tiles, complete all as specified and directed. |
| 48 | M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.3 sq, and not exceeding 1 sqm, light shade, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, with 15mm screed in CM 1:6, including dismantling of existing tiles, complete all as specified and directed. |
| 49 | M&L for chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigments in floor complete all as specified over and including 15mm thick screed bed in CM 1:4, including dismantling of existing tiles, complete all as specified and directed. |
| 50 | M&L for 75mm Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed. |
| 51 | M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 52 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 53 | Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 54 | Brickwork with old size flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed. |
| 55 | M&L, 10 mm thick rendering in CM 1:6 to brick/concrete wall surfaces trowelled to even & smooth withour using extra cement, including taking down of existing plaster, complete all as specified and directed. |
| 56 | Description all as per item No 55.00 above but in 15mm CM 1:4 includind WPC complete, including taking down of existing plaster, all as specified and directed. Note:- WPC shall be measured and paid separately. |
| 57 | Supply only water proofing compound complete all as specified and directed. |
| 58 | M&L, 10mm thick rendering in CM 1:3 to brick/concrete ceiling surfaces trowelled to even & smooth without using extra cement, including taking down of existing plaster, complete all as specified and directed. |
| 59 | M&L two coats of Oil bound distemper on new plastered or unplastered surfaces over and including 2 mm thick acrylic wall care (Birla / JK white / Asian / Berger) putty s including preparation of surfaces complete all as specified and directed. |
| 60 | M&L one coats of Oil bound distemper on old plastered or unplastered surfaces over and including 1 mm thick acrylic wall care (Birla / JK white / Asian / Berger) putty and including preparation of surfaces complete all as specified and directed. |
| 61 | M& L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over one coat of alkali resistant paint complete all as specified and directed. |
| 62 | M& L for preparation of old surfaces of wall and applying one coat of cement base paint complete all as specified and directed. |
| 63 | M&L of three coat of white wash on newly plastered surface as on celing including preparation complete all as specified and directed. |
| 64 | Dismantling wrought iron or mild steel work of any description not otherwise provided, for MS railing at passage, stair and rear sitouts complete all as specified and directed. |
| 65 | M & L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 66 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including welding etc Fe-410-W(gde-E-250) quality B complete all as specified and directed. |
| 67 | S&F mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but nexc 10cm long and diameter of neck in mm 11 to 15 complete all as specified and directed. |
| 68 | M&L Painting steel/concrete surface of any description over 10 cm width and girth including preparation, primer with red oxide and two coats of synthetic enamel paints complete all as specified and directed. |
| 69 | S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to iron angle as chajja, fixed with self tapping screws complete all as specified and directed. |
| 70 | Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 meter in depth and getting out in soft/loose soil complete all as specified and directed. |
| 71 | Returning, filling in, including spreading,levelling, watering and well ramming in layer not exe 25 cm complete all as specified and directed. |
| 72 | Removing excavated materials(soils) to a distance exc 250m but not exc 500 M and depositing where complete all as specified and directed. |
| 73 | S&F, 150 mm nominal dia (6'') PVC pipe of working pressuere of 4 kg/cm2 single socketed in any length and jointing pipes with ahesive solution in laid in trenches or in floors complete all as specified and directed. |
| 74 | M&L of type C-2,1:3:6 using 40mm nominal graded agregate for Concrete bed to drain pipes of size 150 mm including packing under, and haunching :against the sides of pipes after they are laid complete all as specified and directed. |
| 75 | M&L providing cement concrete type B1 1:2:4(20 mm graded aggregate) as in coping, water troughs and the like including weathering, slightly rounded or chamafered angles and throating complete all as specified and directed. |
| 76 | M&L for PCC (1:4:8) type D-2 using40mm graded stone aggregate in foundation / filling and mass concrete complete all as specified and directed. |
| 77 | M&L for precast reinforced cement concrete type B1, 1:2:4 using 20mm graded stone aggregate in cover slabs (for manholes etc), water (tank/drain) cover, shelves, landing and similar articles with plain faces including necessary moulds and setting in CM 1:4 complete all as specified and directed.Note: Reinforcement to be measured separately. |
| 78 | High strength deformed TMT steel bars as in reinforcement 10mm dia and over cut to length, bent to shape required, including cracking, bending spirally for hooping for columns, hooking endsand binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 79 | Cutting into existing manholes for connecting new drains 150mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed. |
| 80 | Taking down eaves gutter or RWP of any description including fittings complete all as specified and directed. |
| 81 | S&F, 110mm dia PVC SWR pipe of single socketed with rubber joint, jointed with solvent joint fixed to wall/ floor complete all as specified and directed. |
| 82 | S&F, 110mm dia PVC bend any radius complete all as specified and directed. |
| 83 | S&F , 110mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 84 | S&F , 75mm dia PVC (SWR) junction double, (Single T) equal or unequal complete all as specified and directed. |
| 85 | S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls/ floor complete all as specified and directed. |
| 86 | S&F PVC (SWR) bends 75mm bore with/without access door any radius complete all as specified and directed. |
| 87 | S&F PVC (SWR) single junction 'T' 75 mm bore with access door any radius complete all as specified and directed. |
| 88 | Taking up or down 15mm bore dia, steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 89 | Taking up or down for 20mm bore steel water tubing galvanised with connection complete all as specified and directed. |
| 90 | Supplying and laying of CPVC pipes, class-1 (SDR 11) & 20mm Nominal dia with fittings in wall/ceiling complete all as specified and directed. |
| 91 | Supplying and laying of CPVC pipes, class-1 (SDR 11) & 25mm Nominal dia with fittings in wall/ceiling complete all as specified. |
| 92 | S&F Brass Elbow for special fitting of 20 mm Nominal bore CPVC,class-1 (SDR 11) pipe complete all as specified and directed. |
| 93 | S&F Brass Elbow for special fitting of 25 mm Nominal bore CPVC,class-1 (SDR 11) pipe complete all as specified and directed. |
| 94 | S&F Brass Tee for special fitting of 20 mm Nominal bore CPVC,class-1 (SDR 11)pipe complete all as specified and directed. |
| 95 | S&F Brass Tee for special fitting of 25 mm Nominal bore CPVC,class-1 (SDR 11) pipe complete all as specified and directed. |
| 96 | S&F in repair One piece WC with 10 litre capacity interal cistern with floor mounting frame, installation kit, drain pipe connection set, including necessary cuttingcutting to wall / floor making good to walls / floor complete all as specified and directed. |
| 97 | S&F in repair Vitreous china wash basin white flat back size 550 x 400mm size, of padestal type including cutting for and pinning in ends of brackets or erecting stand but including of fixing of supply and waste pipe, 32mm PTMT waste coupling, all as spd and dir. |
| 98 | S&Fin repair 15 mm bore brass CP basin mixer long shank / pop up for mixing hot &cold water screwd down for iron pipe and fixed in repair complete all as specified and directed. |
| 99 | S&F in repair Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed ® 15mm chromium plated cast copper alloy bib taps complete all as specified and directed. |
| 100 | S&F in repair fancy type chromium plated Angle valves, cast copper alloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule complete all as specified and directed. |
| 101 | S&F in repair Bevelled edge mirror of 5 to 6 mm thick selected quality glass, 600 x 450 mm size, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with Chromium plated brass screws and cup washers, complete all as specified and directed. |
| 102 | S&F in repair Wall Mixer 3-in-1 System with telephonic shower rose with 115 mm Bend Pipe & Aerator complete all as specified and directed. |
| 103 | S&F in repair PVC Connection 15mm size with PTMT nuts of Length 600mm complete all as specified and directed. |
| 104 | S&F Sheet glass shelf assembly consisting of 5.5mm thick heet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 105 | S&F in Repair Towel Rail 600mm long of CP fixed and including chromium plated brass screws and wooden/plastic cleats, (Minimum weight 190gms) complete all as specified and directed. |
| 106 | S&F Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. |
| 107 | S&F in repair rotational moulded polyethylene water storage tanks (tripple layer White in colourcylindrical vertical with closed top) of 1000 litres capacity, hoisted and fixed in position including connecting up pipes i.e. nipple socket / unions etc. complete all as specified and directed. |
| 108 | S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 20mm bore complete all as specified and directed. |
| 109 | S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipe complete all as specified and directed. |
| 110 | S&F in Repair PVC Floor trap 75mm bore with grating including jointing using solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed and making good damage portion with same material of existing floor etc complete all as specified and directed. |
| 111 | S&F made single extruded WPC (Wood Polymer composite)) Solid door/ window/ceosetory windows & other Frames/ chowkhat of size 45 X 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade) calcium carboante and natural fibers (Wood powder/roce hisk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100 gms)fabricated with miter joints after applying PVC Solvent cement and screwed with full body threaded star headed SS screwes having minimum frame density of 750 Kg/cim screw withdrawal strength of 2200 N (Face) & 1100 N (Edge) minimum compressive strength of 58 N/mm2 modules of elasticty 900 N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water/ moisyure proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasterners of required dia and lentgh complete all as specified and directed. |
| 112 | Factory made single extruded WPC (Wood Polymer Composite) Solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspensio Grade) calcium carbonate and natural fibers (Wood powder/rice husk/wheat husk) and non toxicity additive (maximum toxicity index of12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Eage) minimum compressive strength 50 N/mm2 modulus of elastcity 850 N/mm2 and reistance to spread of flame of class A category with property of being termite/borer proof, water /moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 113 | Removing all disintregated and loose concrete of any thickness incl plaster if any in RCC Colmn, Chajjas, Slabs, Beams, Lintels etc, removing all loose rust/scale from exposed reinforcement bars by using wire brushes and sand paper including cleaning of exposed surfaces of reinforcement with protective anti corrosive epoxy bonding chemical (Mate Pidilite) and tide reinforcement bars/IRC fabric 50mm x 50mm x 12 gauge if required to reinforcement concret bond primer to exposed surfaces and applying cement mortar 1: 3:4 with WPC and average thikness note less than 20mm including IRC 50mm x 50mm x 12mm gauge or reinforcement bars in the removing debris, complete all as specified and directed.Note : Upto the hight of 3(Three) storey building including necessory scaffolding to execute the work and IRC 50mm x 50mm x12 guage or reinforcement bars shall be paid separatly. |
| 114 | Supply only IRC 50mm X 50mm and12 gauge mess complete all as specified and directed |
| 115 | S&F Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 116 | S&F CP Sink Mixer with Swinging Casted Spout with Aerator complete all as specified and directed. Note:- Cost of taking down of existing bib taps included in the unit rate of this item and nothing extra is payable on this account. However unserviceable bib taps shall be considered in the schedule of credit. |
| 117 | Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete including taking out existing unserviceable terminal boxes and conduit with swithces/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed. |
| 118 | Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/ fan/bell point in existing PVC rigid non metallic new concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per exisitng treatment complete all as specified and directed. |
| 119 | Description all as per item No 118.00 (here-in-before) but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed. |
| 120 | Description all as per item No 118.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed. |
| 121 | Description all as per item No 118.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed. |
| 122 | Description all as per item No 118.00 above but point wiring with 4 sq mm single core FRLS cables and earth continuity wire with 4 Sq mm single core cable connected to earth plug socket for AC complete all as specified and directed. |
| 123 | S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts complete all as specified and directed. |
| 124 | S&F Modular switch 1 way 16A 1 module complete all as specified and directed. |
| 125 | S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed. |
| 126 | S&F Modular socket 6A/16A -2/3 pin combined 2 module type 230 Volts, AC complete all as specified and directed. |
| 127 | S&F Modular lamp holder, insulated body with back plate including LED Bulb of 9 watt suitable for batten fittings complete all as specified and directed |
| 128 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 129 | M&L Buzzer, Ding Dong AC 230 volts, single pole ISI Marked, complete all as specified and directed. |
| 130 | Supply and fixing modular bell push 6A 1 module complete all as specified and directed. |
| 131 | S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed |
| 132 | Supply & fixing Modular type (1/2 module as per site requirement) ceiling fan regulator electronic step type suitable for 1200mm/1400mm sweep fan complete all as specified and directed |
| 133 | S&F for decorative wall light stainless steel rust free fixture with white glass diffuser including 10 Watt capacity minimum filament lamp, complete all as specified and directed. |
| 134 | S&F in repair LED light fitting 40watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any crack. The fitting should have following technical specification complete all as specified and directed :- (i) surge protection of minimum 2 KV (ii) power factor should be more than 0.90 (iii) cool white colour, (iv) total hormonic distoration (THD) should not be more than 15% (v) lumen output should not be less than 1700 lumens, (vi) can withstand with input voltage range 140-280V AC, (vii) colour rendering index should not be less than 80, (viii) Corelated colour should be minimum 6000 degree Kelvin (ix) Minimum warranty period of 2 Years |
| 135 | S&F Sheet metal enclosure distribution board SP&N,12 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632, BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed. |
| 136 | S&F Sheet metal enclosure distribution board SP&N,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed. |
| 137 | Supply and fixing MCBs SP 6 to 32Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB |
| 138 | Supply and fixing MCBs SPN 32Amps to 63 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB |
| 139 | S&F Sheet metal enclosure distribution board TPN,4 way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB as incoming and MCB's as outgoing in DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar and grouting, fixing on wall with nut bolts wasshers proper with PCC works complete all as specified and directed. |
| 140 | S&F TPN 63 Amps, 415 volts, 16 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCCB should be the same as that of DB |
| 141 | Supply & fixing in replacement of Bldg security light fitting LED 30 W, pressure die cast housing epoxy powder coating IP -65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40 mm bore light grade, 1.5 mtr length and fixed with MS Calmps of size 40x5 mm- 02 nos ,nuts, bolts and washers on wall. complete all as specified and directed. Make Bajaj/Halonix/Orient |
| 142 | Taking down carefully copper/aluminium Submain wiring from battan /conduit from DBs, MCBs, etc) and making good to disturbed surfaces of walls, floor etc complete all as specified and directed. |
| 143 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable for phase, one run of 6 sqmm cable for earthing and one run of PVC conduit will be measured as one unit. |
| 144 | Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 AMP complete all as specified and directed. Please Enable Macros to View BoQ information |
| 145 | Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 AMP complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender