Tender For Provision Of Hard Standing For ‘B Vehicle Repair Area Of 184 (I) Fd Work Shop Coy Eme At Nimu Mil Station Under Age (I) Nimu.
Tender Value
44.40 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
4 days left
EMD
89000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Hard Standing For ‘B Vehicle Repair Area Of 184 (I) Fd Work Shop Coy Eme At Nimu Mil Station Under Age (I) Nimu.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Jul-2026 | BOQ | BOQ | 29-Jul-2026 |
| 2 | 29-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means in all kind of soils (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) includinggetting out and disposal ofexcavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and as directed by Engineer-in-charge. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard and dense soil complete all as specified and as directed by Engineer-in-charge. |
| 3 | Rolling and consolidating formation surfaces in cutting with power roller exc 5 tonne but not exc 8 tonne complete all as specified and as directed by Engineer-in-charge. |
| 4 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by Engineer-in-charge. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by Engineer-in-charge. |
| 6 | Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by Engineer-in-charge. |
| 7 | Material and labour for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-charge. |
| 8 | Material and labour for PCC 1:4:8 type D2 using 40mm graded crushed agg 150 mm thick over rammed earth as in sub base of hard standing complete all as specified and as directed by Engineer-in-charge. |
| 9 | Sand cushioning 25mm thick under paving blocks incl watering and consolidation complete all as specified and as directed by Engineer-in-charge. |
| 10 | Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment complete all as specified and as directed by Engineer-in-charge. |
| 11 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of jointsexcept at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by Engineer-in-charge. |
| 12 | Material and labour for cement concrete foundations, filling and mass concrete type D 2 (1:4:8) complete all as specified and as directed by Engineer-in-charge. |
| 13 | Material and labour for Pre-cast cement concrete block( using PCC 1:3:6 type C1) masonry with solid blocks, exc. 10 cm in width and setting in mortar complete all as specified and as directed by Engineer-in-charge. |
| 14 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces. C:M 1:6 complete all as specified and as directed by Engineer-in-charge. |
| 15 | Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-charge. |
| 16 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed by Engineer-in-charge. |
| 17 | Material and labour for reinforced cement concrete (nominal mix) M-15 ( 1:2:4) as in chajjas/ shelves complete all as specified and as directed by Engineer-in-charge. |
| 18 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces. C:M 1:4 on celing/soffit complete all as specified and as directed by Engineer-in-charge. |
| 19 | Material and labour for painting on newly prepare surface of any description over 10cm girth or width, not otherwise described with one coat of primer and two coat of cement based paint on ceiling / soffits complete all as specified and as directed by Engineer-in-charge. |
| 20 | Material and labour for painting on newly prepare surface of any description over 10cm girth or width, not otherwise described with one coat of primer and two coat of cement based paint on walls complete all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
| 21 | Material and labour for painting on newly prepare surface of any description over 10cm girth or width, not otherwise described with one coat of primer and two coat of cement based paint on walls complete all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 05, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender