Defence Statutory Bodies & Commissions/Committees Closing in 18 days TDR #56370321

Tender For Repair/Replacement Of Chain Link Fencing, Barbed Wire, Concertina Coil, Hard Standing, Chequered Tiles And Interlocking Tiles ,Drain At installation Virbahu, Iu, Mmt And installation Satavahana And Ge Office Area Under Age B/R-I Of Ge (Nb)

Issued by Statutory Bodies & Commissions/Committees · Visakhapatanam, Andhra Pradesh
Tender Value
45 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
18 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair/Replacement Of Chain Link Fencing, Barbed Wire, Concertina Coil, Hard Standing, Chequered Tiles And Interlocking Tiles ,Drain At installation Virbahu, Iu, Mmt And installation Satavahana And Ge Office Area Under Age B/R-I Of Ge (Nb) Visakhapatnam

BOQ

Name of Work:- REPAIR/REPLACEMENT OF CHAIN LINK FENCING, BARBED WIRE, CONCERTINA COIL, HARD STANDING, CHEQUERED TILES AND INTERLOCKING TILES ,DRAIN AT INS VIRBAHU, IU, MMT AND INS SATAVAHANA AND GE OFFICE AREA UNDER AGE B/R-I OF GE (NB) VISAKHAPATNAM
Sl. No. Item Description
1Disamntling RCC post or struts any section, including taking out embedded portion in concrete and making good disturbed ground including cleaning and cutting of grass, shrubs, bushes, etc complete all as specified and directed.
2M&L for running welding in repairs of thickness of metal exc 9mm but n.exc 20mm complete all as specified and directed.
3Dismantling fencing wire mesh, any type complete complete all as specified and directed.
4Excavating in post holes (or similar holes) each n. exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil complete all as specified and directed.
5M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.
6M & L for Mild Steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and directed.
7M & L for 40 mm thick, plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in Flooring, Hard standing, Path etc finished the surfaces even and fair without using extra cement complete all as specified and directed.
8M & L for hardcore of gauge n.exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
9Taking out of damaged interlocking paver block from its existing position and stacking at site complete all as specified and directed.
10M & L for Sand filling under floors or in foundations including spreading, levelling, watering and consolidation complete all as specified and directed.
11M & L for Machine pressed precast conctete coloured interlocking paver block with glossy finish ,any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment
12M & L for glazed designer Chequered cement concrete tiles of size 30cm x 30cm x 23-25mm thick, as in floors etc, including 15 mm thick screed bed in cement mortar 1:6 and set & jointed in neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and directed.
13M & L for plain cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed.
14Supply only chain link MS galvanisd fencing made of 5.5mm dia wire with and including PVC coating of 1.3mm thickness and mesh size 50mm x 50mm complete all as specified and directed Note : Per meter weight of chain link brought by the contractor shall be fixed through a BOO.
15Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed
16M & L for mild steel round bar 10mm dia and over cut into length, bend to shape required including cranking bending spirally for hoping as in tie bar for fixing chain link fencing complete all as specified and directed.
17S & F Mild steel screw bolts n.exe 12 mm of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 30cm long complete all as specified and directed.
18M & L for framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
19M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed.
20S & F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.
21S & F in repairs,1000 mm dia razor tape concertina coil made from High Tensile Spring Steel comprising of Aluminium base with zinc alloy @150 gm/sqm Conforming to IS 4454 {Part-I] of Grade- SM duly Hot dipped Galvanised and punched tape material as per IS-513 having 36 Nos rounds per 6 m length [before stretching], having medium barbs [Barb length: 24+/- 1 mm, Pitch between two barbs 35+/- 1mm,Barb width-18.60 mm,Barb Spacing- 36.00 mm ), Spring core Wire (2.5mm thick) of high tensile strength of 165 kg/ Sq.mm with tape (0.52 mm thick) and weight 43.478 Grams/Metre and fixing to 'Y' or Trapezoidal shaped angle iron brackets placed at 2.00m to 3.00m apart and with 6/9 horizontal RBT [Reinforced Barbed Tape] wire, stud tied with GI staples and GI clips to retain horizontal including necessary bolts and coating with PxCompound [Anti Rust] complete all as specified and directed(Note : Horizntal barbed wire and angle iron supports shall be measured and paid seperately under relevant items of BOQ. After stretching the coil, the length of the compound wall on which it has been stretched shall be considered for measurement.)
22Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal of debris and rubbish outside MD land as directed by the Engr-in-Charge.
23M & L for Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed.
24M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.
25M & L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and directed.
26Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish to outside MD land complete all as specified and directed
27M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.
28M&L for preparation of new platered surface of wall and applying two coats of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, having dart pick up resistant, silicon enhanced, UV resistant and PU enhanced property over a coat of alkali resistant primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces including all necessary scaffolding,complete all as specified and directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS
29Demolition of reinforced cement concrete in any position not otherwise specifically provided for and removing rubbish to outside MD land complete all as specified and directed.
30M & L for Precast Reinforced Cement Concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in cover slab (For manhole etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary form, moulds, etc complete all as specified and directed by the Engr-in-Charge. (Note : Reinforcement shall be measured and paid separately)
31S & F high strength corrosion resistant TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.
32Dismantling of stone slabs & tiles of any description or thickness laid, bedded and pointed in cement mortar, in floors, aprons etc., complete all as specified and directed.
33M & L for granite stone slab (of any type) as in vertical surfaces such as skirting/dado etc, 18 to 20 mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick screed bed in cement mortor 1:4 & cutting, polishing complete all as specified and directed.
34Demolition of un-reinforced cement concrete in ground floors and pavings n.exc 15cm thickness, (Below or above Ground level) and disposal of debris and rubbish to a distance upto outside MD land distance exc 1.5 km but nexc 5.00 km complete all as directed by the Engr-in-Charge
35M & L for Plain cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in surface channel, drains etc complete all as specified and directed.
36Extra for forming fair finished to concrete surface of drain 30cm inner girth in cement including forms, mould, mitred/stopped etc complete all as specified and as directed.
37Cleaning/de-silting of lose mud, rubish etc from covered drain bed after removing and re-placing in its existing poistion of covers including uprooting of vegetation growth thoroughly and wire brushing including flushing with water so as to achieve smoth flow of water in drain of bed width upto 60 cm (soil mud upto 10cm depth) and removing rubish outside MD land and depositing in low laying area complete directed by the Engr-in-Charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56370321
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 45 Lakhs
LAST DATE 29-07-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/Replacement Of Chain Link Fencing, Barbed Wire, Concertina Coil, Hard Standing, Chequered Tiles And Interlocking Tiles ,Drain At installation Virbahu, Iu, Mmt And installation Satavahana And Ge Office Area Under Age B/R-I Of Ge (Nb) Visakhapatnam
Basic Detail
Tender No C/8708/26-27/E8 TOKEN 41 OF 2026-27
Bidding Type Tender
Location
City Visakhapatanam
State Andhra Pradesh
Key Dates
Publish Date 08 Jul 2026
Submission Date 29 Jul 2026
Open Date 01 Aug 2026
Finance
Tender Value 45 Lakhs
Tender Fee 500
EMD 90000
Exemption Available
Document List
BOQ_870473.xls
fcdd6ee4-1c1c-41c6-a15d-99944ac7c61c.html
Tendernotice_1 (5).pdf
Tender_8708.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 08, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 29, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Aug 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 21 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_870473.xls

html

fcdd6ee4-1c1c-41c6-a15d-99944ac7c61c.html

pdf

Tendernotice_1 (5).pdf

pdf

Tender_8708.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders