Tender For Provn Of Special Repair To Bldg No T-01 (Bn Kote) In The Loc Of 155 Inf Bn (Ta) Jak Rif At Naya Raipur Mil Stn Under Special Repair For The Fy 2026-27
Tender Value
9.67 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
19 days left
EMD
19400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raipur → Chhattisgarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Special Repair To Bldg No T-01 (Bn Kote) In The Loc Of 155 Inf Bn (Ta) Jak Rif At Naya Raipur Mil Stn Under Special Repair For The Fy 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as specified and directed. |
| 2 | M&L 75 mm thick PCC 1:4:8 type D2 Using 40 mm graded stone aggregate as in floor finished even and fair surface complete all as specified and directed. |
| 3 | M&L for cement concrete 1:3:6 type C2, 75mm thick (40 mm graded stone agg) as in plinth protection complete all as specified and directed. |
| 4 | M&L 40 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in floors finished even and fair surface complete all as specified and directed. |
| 5 | Dismantling of wall and ceiling boards(fibre, pulp,insulation etc) or insulation board/slabs/blankets any thickness including cover fillets all as specified. |
| 6 | Supply & fixing 'E' board (Everest make) 605 x 605 x 4 mm thick white prelaminated set & embosed, reinforced, designer ceiling board tiles of approved texture fixed at all height laid on hot dipped galvanised iron imposed grid with 24 mm wide T-section exposed flanges which shall be powder coated, white,.the frame work shall comprises of main runner made from 0.33 mm thick galvanised steel sheet and of size 24 x 32 x 300 mm and spaced at 1200 mm center to center fixed to be structural soffits by approved hangers at 1200 mm rawl center, hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level and fasteners and screws etc., the last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall, flush fitting of 120 mm long cross tee (with double stiching) to be interlocked between main runners at 600 mm center to center, size 1200 x 600 mm modules, cross tee longer than 600 mm to be supported independently on 600 x 600 mm moduler to be formed by fitting 600 mm long cross tee centrally between the 1200 mm cross tee. Tee, perimeter wall angle shall be of 0.45 mm thick GS sheet of size 19 x 19 mm and 300 mm long of white colour all as per manufacturer's instructions complete all as directed. |
| 7 | M&L for 8 mm thick Non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws complete all as specified and directed. |
| 8 | Dismantling wrought iron or mild steel work of any description not other wise provided complete all as specified and as directed. |
| 9 | M&L Rolled MS sections as in framing for cladding, glazing and the like including door frames/chowkats, roof trusses Joist, channel, angle, or tee sections fixed with angle cleats and connecting plates of grade Fe 410-W (Gde E-250) quality -A complete all as specified and directed. |
| 10 | S&F FE-410-W (Gde E-250) quality A plates (Plain or chequered channels,squares cut or notched (ordinary and counter sunk) forming holes,without any attachement complete all as specified and directed. |
| 11 | S&F FE-410-W (Gde E-250) quality A roof truss (framed,trussed,purlins,crane gantries,rails and fastening and heavy bracket framing(Beam,tee angle,channel or flat sections) including distance pieces ,cleats etc. complete all as specified and directed. |
| 12 | Taking down chowkats or frames not exceeding 1.5 Sqm and with shutter (Without taking off shutters from the frame) & removing from site complete all as specified and directed. |
| 13 | S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 14 | S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 15 | M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes framed guard bars iron doors.ladders framed balusters , walk ways. Railings, frame work of water tanks and similar work conforming to Fe410.complete all as specified and directed. |
| 16 | S& F for sheet glass 4mm thick, ordinary quality and glazing fixed with aluminium section in squares not exceeding 0.5Sqm in each pane complete. |
| 17 | S&F aluminium anodised barrel tower bolt 200 mm complete all as specified and directed. |
| 18 | Aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete. |
| 19 | S&F MS 100 mm size butt hinges medium wt. of cold rolled complete and all as specified and directed. |
| 20 | S&F Aluminium handles, cast type anodised150mm size complete all as specified and directed. |
| 21 | S&F in repair fancy type curtain rails harisson rails,mild steel , chormium plated with fixing bracket,stops,rollers etc for hangging curtain rod complete all as specified and directed. |
| 22 | Dismantling plain or corrugated steel sheeting, any gauze, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed. |
| 23 | S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 24 | S&F plain black mild steel sheeting 0.80mm thick in ridge, valley gutter & fascia,drip and straight flashing as directed by Eng-in-charge. |
| 25 | Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 26 | M&L for Rendering 10 mm thick plaster on brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified & directed. |
| 27 | M&L of two coat of synthetic enamel paint over one coat of zinc chrome on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces. |
| 28 | M&L one coat of synthetic enamel paint on old steel surfaces of any description not otherwise described over 10cm width or girth including preparation of old surfaces complete and all as specified and directed |
| 29 | S&F for 600mm x 450 mm bevelled edge mirror of selected quility glass, mounted on 6 mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screwes and cup washers complete all as specified and as directed. |
| 30 | Demolition of stone slab and tiles of any description or thickness in floor, aprons etc. complete all as specified and directed. |
| 31 | M&L for machine cut mirror polish kota stone slab flooring 20-25mm thich over 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shad of the slab including round nosing at corners rubbing and polishing .complete all as specified and directed. |
| 32 | M&L for machine cut mirror polish kota stone slab 20-25mm thich in riser of step,skirting,dado and pillers over and including 10mm thick rendering in CM 1:6 including rubbing and polishing .complete all as specified and directed. |
| 33 | M&L for Sand filling under floors/ paver block or in foundation including watering and consolidation complete all as specified and directed |
| 34 | M&L for machine pressed precast conctete interlocking paver block any shape and any size confirming to IS 15658-2006 of 60mm thickness ,M -35 grade with grey cement and pigment complete all as specified and directed |
| 35 | Total contract sum shall be calculated after deduction of schedule of credit amount of Rs. 42,380.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender