Tender For Repair/ Maintenance To Compound/ Boundary Wall, Fencing, Gate And Certain Allied Works In Residential And Tech Area At Vrde Ahmednagar
Tender Value
30 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
18 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance To Compound/ Boundary Wall, Fencing, Gate And Certain Allied Works In Residential And Tech Area At Vrde Ahmednagar
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work/blockwork in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed. |
| 2 | M & L for Brick work with common burnt clay F.P.S. (non modular) bricks of class,designation 7.5 in 1:4 Cement mortar complete all as specified and directed. |
| 3 | M & L for factory made Precast concrete solid blocks of 200 mm thickness of grade M10 from approved manufacturer in Cement mortar 1:6 complete all as specified and directed. |
| 4 | M & L for random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 with cement mortar 1:6 complete all as specified and directed. |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed. |
| 6 | M & L for removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as specified and directed. |
| 7 | M & L for external 12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) complete all as specified and directed. |
| 8 | M & L for repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 Sqm meters and under with cement mortar 1:4, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground complete all as specified and directed. |
| 9 | M & L for finishing walls with Acrylic Smooth exterior paint of required shade over new work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm including preparation of surfaces complete all as specified and directed. |
| 10 | M & L for finishing walls with water proofing cement paint of required shade over new work (Two or more coats applied @ 3.84 kg/10 sqm) over and including prming coat and including preparation of surfaces complete all as specified and directed. |
| 11 | M & L for finishing walls with Acrylic Smooth exterior paint of required shade over old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface over and including prming coat and including preparation of surfaces complete all as specified and directed. |
| 12 | M & L for finishing walls with water proofing cement paint of required shade over old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat over and including prming coat and including preparation of surfaces complete all as specified and directed. |
| 13 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead complete all as specified and directed. |
| 14 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead complete all as specified and directed. |
| 15 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. complete all as specified and directed. |
| 16 | M & L for PCC 1:4:8 (40 mm nominal size derived from natural sources) complete all as specified and directed. |
| 17 | M & L for plain cement concrete of 1:3:6 (using 20mm graded stone aggregate) cement concrete complete all as specified and directed. |
| 18 | M & L for providing and laying cement concrete 1:2:4 (using 20mm graded stone aggregtes) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level including necessary formwork complete all as specified and directed. |
| 19 | M&L precast RCC 1:2:4 type B1 ( using 20 mm graded stone aggregate) as in cover slab set in CM 1:4 incl necessary form work complete all as specified and directed. |
| 20 | S & F for Thermo-Mechanically Treated bars of grade Fe-500D or more steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding complete all as specified and directed. |
| 21 | S & F in repairs 60mm thick factory made cement concrete paver block of approved shape and colour of M -35 grade by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. complete all as specified and directed. |
| 22 | M&L in repairs hardcore of broken stone or boulders with gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 23 | Dismantling tile work in floors and roofs laid in cement mortar thickness of tiles above 10mm and upto 25mm, including stacking material within 50 metres lead complete all as specified and directed. |
| 24 | M& L for chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with dark shade pigment using ordinary cement to match the shade of tiles, including rubbing and cleaning etc. over and including 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). complete all as specified and directed. |
| 25 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed. |
| 26 | M & L for providing and fixing 18 mm thick granite stone slab of colour black, cherry/ Rubby red over 0.50 sqm, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, columns,walls, steps and similar locations of required size, approved shade, colour and texture laid over and including 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete all as specified and directed. |
| 27 | Excavating holes in all kinds of soil more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m complete all as specified and directed. |
| 28 | Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead complete all as specified and directed. |
| 29 | Dismantling post or post struts (wood steel or RCC) any section, including taking out embedded portion and making good posts embedded in concrete complete all as specified and as directed complete all as specified and directed. |
| 30 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead complete all as specified and directed. |
| 31 | Supply, Fabricate and fix steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete all as specified and directed. |
| 32 | Supply, Fabricate and fix structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete all as specified and directed. |
| 33 | M & L for painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture including preparation of forefaces complete all as specified and directed. |
| 34 | S & F in repairs concertina coil (razor edge) fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) complete all as specified and directed. |
| 35 | S & F in repairs G.I. chain link fencing made of G.I. wire of dia 4 mm of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete all as specified and directed. |
| 36 | S & Fixed galvanised 2 strand steel barbed wire 2.24 mm dia of barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to angle fencing above compound wall and any type, including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed. (each line of wire to be measured) |
| 37 | Supplying and fixing in repairs rolling shutters of approved make, made of 80x1.20 mm M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and 1.20 mm thick M.S. top cover of required thickness for rolling shutters complete all as specified and directed. |
| 38 | Supplying and fixing in repairs rolling shutters of approved make, made of 80x1.20 mm M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and 1.20 mm thick M.S. top cover of required thickness for rolling shutter provided with mechanical device chain and crank operation for operating rolling shutters exceeding 10.00 sqm and upto 16.80 sqm in the area complete all as specified and directed. |
| 39 | S & F ball bearing for rolling shutters complete all as specified and directed. |
| 40 | Taking down and refixing of top hood cover of existing rolling shutter, including greasing and over-oiling of all components for smooth operation, realignment of guide channels, bearing and tension spring, making good locking arrangement, cleaning, and all other connected works, complete all as specified and directed for shutters not exceeding 20.00 sqm. |
| 41 | Taking down and refixing of top hood cover of existing rolling shutter, including greasing and over-oiling of all components for smooth operation, realignment of guide channels, bearing and tension spring, making good locking arrangement, cleaning, and all other connected works, complete all as specified and directed for shutters exceeding 20.00 sqm but not exceeding 30.00 Sqm. |
| 42 | Taking down and refixing of top hood cover of existing rolling shutter, including greasing and over-oiling of all components for smooth operation, realignment of guide channels, bearing and tension spring, making good locking arrangement, cleaning, and all other connected works, complete all as specified and directed, for shutters not exceeding 30.00 sqm but not exceeding 40.00 Sqm. |
| 43 | Taking down and refixing rolling shutter of any description, complete with all components, including removal from site and refixing after necessary easing and adjustment, for shutters not exceeding 15.00 sqm area, complete all as specified and directed. |
| 44 | Taking down and refixing rolling shutter of any description, complete with all components, including removal from site and refixing after necessary easing and adjustment, for shutters exceeding 15.00 sqm but n exc 25.00 Sqm area, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender