Tender For Special Repair To Khukri Auditoriumt To Incl Air Conditioning System At 14 Gtc Subathu Under Ge Kasauli .
Tender Value
43.70 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
19 days left
EMD
87400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Khukri Auditoriumt To Incl Air Conditioning System At 14 Gtc Subathu Under Ge Kasauli .
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Jul-2026 | Date Corrigendum amendment to critical dates | Date | 05-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Section - I |
| 2 | Dismantling plain or corrugated steel sheeting any guage thickness incl Nainital pattern as in roof covering complete all as specified. |
| 3 | Supply and fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges etc. fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm, all as specified & directed by Engr-in-Charge. |
| 4 | Same as item No 2.00, above but plain steel sheet as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape, cut to designed shape (Jhhallar) etc all as specified. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 6 | Supply and fixing Rolled mild steel sections used as in frames, main and cross beams, Pillars, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates; ladders; water tank staging; railings etc Fe-290 (Gde E-165), complete all as spd. |
| 7 | Dismantling PVC water storage tank of capacity exceeding 250 litre but not exceeding 500 litre, complete all as specified and directed. |
| 8 | Supply and fixing Rotational moulded PVC, Triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with inlet & outlet connections with 15/20mm ball valve & including all fittings such as GI tank nipple 150 mm long with washer & plug etc, complete all as specified and directed. |
| 9 | Supply and fixing in repair, ball brass valve 20mm dia, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 10 | Material & Labour for cleaning existing RCC/PVC Tank of capacity exc 250 ltrs but n.exc 500 Ltr by mentioned process all as directed by Engr-in-chrge. |
| 11 | Same as item No 9.00 above, but capacity exc 500 ltrs but n.exc 1000 Ltr all as directed by Engr-in-chrge. |
| 12 | Note:- For above items No. 9.00 & 10.00, Tank cleaning process includes (a) Dewatering & Removing all settled silt, scale & Dust from inside of tanks using brush manually and applying bleaching power, allowed to rest for 1 hour. (b) Cleaning and rinsing the tank using fresh water to wash out complete and allowed to dry for 30 min. (c) Writting detals of 7 cm height using synthetic enamel paint(white/black colur) to mention date of cleaning including rubbing out old letters written over the tank, complete as specified. |
| 13 | Taking down/dismantling old eaves gutters and rainwater pipes, SWR pipes, sewage pipes, CI pipes of any dia (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories. |
| 14 | Supply and fixing PVC (SWR) pipes in any length with rubber ring joints fixed to walls or laid in trenches, 150mm single socketed |
| 15 | Supply and fixing PVC (SWR) bend 150 mm complete. |
| 16 | Demolition of cement concrete (unreinforced) as in ground, roofs, floors, beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed. |
| 17 | Material and labour for 55 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling courses laid and compacted in slope in floor, chajjas, roof complete all as specified and as directed. |
| 18 | Dismantling floor, hearth or wall tiling, terrazzo toping/ dado, including cement mortar bedding/backing and removing rubbish off the premises of MoD land, including preparation of dismantled surface area to receive backing coat/bedding layer for tiles, complete all as specified and directed. |
| 19 | Supply and fixing Virified Ceramic tiles Dark shade/Double Charged/Ultra Charged of 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 20 | Material & Labour Glazed ceramic coloured tiles 8 mm thick, area of each tiles not exceeding 1.00 sqm, as in vertical surfaces such as skirting/dado etc set & jointed in neat cement slurry & pointed in white or coloured cement to match and 10mm thick rendering on wall in CM 1:4 complete. |
| 21 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc, laid beded and pointed in any mortar complete. |
| 22 | Material & Labour 18-20 mm thick granite work (table rubbed and polished) in steps, floor, jambs, cooking platforms, window cill etc. and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including rubbing and polishing complete all as specified and directed. |
| 23 | Material & Labour for Rounding to edges of stone slabs any thick as in in steps, jambs, pillars, cooking plateforms and likes complete all as specified |
| 24 | Roughening surface of old concrete by picking,sweeping clean and washing down eith water to remove dust and brushing neat cement slurry with 3.0 kg of cement per sqm. Complete all as specified and directed. |
| 25 | Material & Labour for Screed bed or beding layer of morter 20mm thick in cement morter 1:4 for laying floor finishes to receiving the kota stone complete all as specified and directed. |
| 26 | Material & Labour for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with gray cement slurry mixed eith pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 27 | Material & Labour for Mirror/diamond polishing with rubbing on old marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete. |
| 28 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc. 1.50sqm & not exc 4.00 sqm each and removing from site all as specified. |
| 29 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exc. 1.5sqm each and removing from site all as specified. |
| 30 | Taking down shutters of any description having area exc. 1sqm but not exc. 2sqm each and removing from site all as specified. |
| 31 | Resecuring or easing & adjusting and refixing in same opening with taking down Shutters of Wooden/Aluminium type of any description exc. 1 sqm each and not exc. 2 sqm incl renewal of connecting hardware complete. |
| 32 | Supply and fixing 125 x 60mm pressed steel frames 1.25mm thick for doors, windows with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts etc. |
| 33 | Supply and fixing 105x60mm pressed steel frames 1.25mm thick for doors, windows, cupboards with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts etc. |
| 34 | Material & Labour for providing cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in filling/fixing chowkhats, plinth courses, copings, kneelers, apex stones, bed plates etc including necessary form work complete all as specified and directed |
| 35 | Supply and fixing for solid PVC door frame of size 50 mm by 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube S&F in opening as per specification and directed Engineer-in-charge. |
| 36 | Supply and fixing factroy made solid panel PVC door shutter 30mm thick (style), wood grain printed PVC sheet, consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded wood grain PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for style and wood grain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of wood grain colour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvetn cement supplying and fixing in the frame at site, complete all as specified |
| 37 | Supply and fixing Flush shutters 35mm thick for door shutter, solid core construction, with block board core and plywood face panels, commercial type on both side. |
| 38 | Supply and fixing Decorative laminate type 1, thickness 0.9mm, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete. |
| 39 | Material & Labour for 35mm thick glazed and Skelton shutter of 2nd class hardwood (Hollock) open rebated and prepared to receive glass,gauge etc divided into squares(04 Nos) with plain chamfered or rounded mitred and rebated sash bars any number, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. Size of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified. |
| 40 | Supply and fixing Powder coated (Colour & Texture as directed) aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) frames with extruded built up standard tubular sections/ appropriate Z sections and other sections (Size as directed) of approved make conforming to IS: 733 and IS:1285, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 41 | Supply and fixing Powder coated (Colour & Texture as directed) aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators (of any type i.e. side hung, top hung, slidling & fixed type etc.) of approved make conforming to IS: 733 and IS:1285 all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 42 | Note for Srl Item No 40.00: For above item includes the providing and fixing necessary stainless steel hinges/ Al. hangles/ Al. Tower bolts/ spivots/ fasteners/ stays/ rollers with its channels and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 all complete as per architectural drawings and the directions of Engineer-in-charge. Note: Prelaminated board, wire mesh and glass to be measured & paid separately. |
| 43 | Supply and fixing in repairs Door closer hydraulically regulated of aluminium (extruded section body), designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed all as specified. |
| 44 | Supply and fixing 5.5mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil puty (or beading, any type) in squares n.exc. 0.5 sqm in each pane complete all as specified and dircted by Engineer-in-Charge. |
| 45 | Supply and fixing stainless steel hinges, medium weight cold rolled mold steel, size 100mm, ISI marked, complete all as specified and directed . |
| 46 | Supply and fixing Aluminium alloy, anodised sliding door bolts 250mm long with hasp and staple(bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, ISI marked, complete all as specified and directed. |
| 47 | Ditto as per item No. 45.00 but fixed in repair |
| 48 | Supply and fixing, aluminium anodised barrel tower bolts of extruded section, 150mm, ISI marked, complete all as specified and directed . |
| 49 | Supply and fixing, aluminium anodised barrel tower bolts of extruded section, 150mm as in repair |
| 50 | Supply and fixing, extruded aluminium alloy handles with plates, fabricated type, anodised 125mm size, ISI marked, complete all as specified and directed . |
| 51 | Supply and fixing, aluminium handles, cast type anodised, 125mm size as in repair |
| 52 | Supply and fixing Hasp and staple Size of 100mm, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, ISI marked, complete all as specified and directed. |
| 53 | Ditto as per Item No. 51.00 but fixed in repair |
| 54 | Supply and fixing double leaged floor door stopper of over all length of cover plate 140 mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified |
| 55 | Ditto as per Item No. 54.00, but fixed in repair |
| 56 | Supply and fixing stainless steel steel wire cloth 0.36mm nominal dia of wire and 1.40mm aparture fixed with tinned tackes or galvanised wire staples or iron flates . |
| 57 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.50 sqm complete all as specified and as directed by Engineer-in-Charge. |
| 58 | Supply and fixing Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-Charge. |
| 59 | Supply and fixing sheet glass 4mm thick ordinary quality and glazing with oil putty and securing pins n.exc 0.50 sqm each panes complete all as specified and as directed by Engineer-in-Charge. |
| 60 | Material & Labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface over 10cm width or girth including preparation complete all as specified and as directed by Engineer-in-Charge. |
| 61 | Material & Labour for preparation of new wooden surfaces & applying two coats of synthetic enamel paint over a coat of pink primer after complete filling, complete all as specified and as directed by Engineer-in-Charge. |
| 62 | Material & Labour for Preparation of old steel surface, of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge. |
| 63 | Material & Labour for Preparation of old wooden surface, of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge. |
| 64 | Demolition of brick work built in cement mortar including all quoins arches pillars all as specified. |
| 65 | Material & Labour for brick work sub class “B” bricks straight or curveted in plan exc. 6mtr mean radius with old size bricks Iin CM 1:6 all as specified. |
| 66 | Same as item No 64.00, above but except bricks all as specified. |
| 67 | Taking down cement plaster on brick or concrete surfaces including racking out jointshacking for keys scrubbing down with water etc. |
| 68 | Material & Labour for rendering 15mm thick in cement mortar 1:4 as on walls of brick/concrete surfaces & over Chajjas for double storey bldg, finished the surface even & smooth w/o using extra cement incl. necessary using scafolding/padding all as specified. |
| 69 | Material & Labour for preparation of new or previously untreated surfaces of wall and applying two coat of acrylic emulsion exterior quality (Apex painting) over a coat of primer, complete all as specified. |
| 70 | Material & Labour for Rendering 5mm thick on ceiling surface in CM 1:3 finished even and smooth complete all as specified and directed by Engr-In- Charge. |
| 71 | Material & Labour for preparing newly plastered surfaces and applying two coats of coats of white wash on ceiling surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 72 | Material & Labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement (Internal surfaces), complete all as specified and directed by Engr-In- Charge. |
| 73 | Material & Labour for 3mm thick wall care putty (laid in 2 layers/coats) on wall surface for making complete smooth surface using sand paper, complete all as specied and directed. |
| 74 | Material & Labour for preparation of new decorated plastered surfaces of walls by applying two coat of oil bound distemper over a coat of primer, complete all as specified and directed by Engineer-in-charge. |
| 75 | Material & Labour for preparation of old decorated plastered surfaces of walls or ceilings by complete removal of old existing treatment of surfaces and after that 3mm thick Birla/ JK wall care putty to obtain smooth regular/ even finish using sand paper and applying two coat of oil bound distemper, complete all as specified and directed by Engineer-in-charge. |
| 76 | Supply and fixing 15mm bore tubes \\"medium grade\\" galvanized with and incl all fittings complete to walls and ceiling or laid in floors and taking down old, complete all as specified & directed. |
| 77 | Supply and fixing 20mm bore tubes \\"medium grade\\" galvanized with and incl all fittings complete to walls and ceiling or laid in floors and taking down old, complete all as spd & directed. |
| 78 | Re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling incl refixing existing water metre to tube and taking down old tubes but refixing old water metres, complete all as specified. |
| 79 | Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling and taking down old but refixing old water metres, complete all as specified and as directed by Engineer-in-Charge. |
| 80 | Supply and fixing in repair cast iron 100mm bore sand cast soil waste or vent pipe as in any length with or w/o ears with cement joints fixed to wall and laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge. |
| 81 | Supply and fixing in repair cast iron 75mm bore sand cast soil waste or vent pipe as in any length with or w/o ears with cement joints fixed to wall and laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge. |
| 82 | Supply and fixing in repair, Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed by Engineer-in-Charge. |
| 83 | Supply and fixing in repair 100mm dia ‘P’ or ‘S’ CI trap complete all as specified and as directed by Engineer-in-Charge. |
| 84 | Supply and fixing CI Bend/elbow 100 mm dia with duck's foot or heel rest complete all as specified and as directed by Engineer-in-Charge. |
| 85 | Supply and fixing CI 'T' junction 100 mm dia with or without oval acess door complete all as specified and as directed by Engineer-in-Charge. |
| 86 | Supply and fixing CI socket(double) collars 100 mm complete all as specified and as directed by Engineer-in-Charge. |
| 87 | Supply and fixing Branch pieces 100mm, single (equal or unequal),ordinary or inverted (spigot or socket type)or with parallel branches complete |
| 88 | Supply and fixing CI Bend/elbow 75 mm dia complete all as specified and as directed by Engineer-in-Charge. |
| 89 | Supply and fixing CI Bend/elbow 75 mm dia with oval access doors complete all as specified and as directed by Engineer-in-Charge. |
| 90 | Supply and fixing CI socket(double) collars 75 mm complete all as specified and as directed by Engineer-in-Charge. |
| 91 | Supply and fixing Branch pieces 75mm, single (equal or unequal),ordinary or inverted (spigot or socket type)or with parallel branches complete |
| 92 | Supply and fixing CI 'T' junction 75 mm dia,double with or without oval acess door complete all as specified and as directed by Engineer-in-Charge. |
| 93 | Supply and fixing Cast Iron soil cowl 75/100 mm dia complete all as specified and as directed by Engineer-in-Charge. |
| 94 | Material & Labour Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) 75 mm dia fixed in repair complete all as specified and as directed by Engineer-in-Charge. |
| 95 | Supply and fixing 15mm bore bib taps long body (fency type) brass cast copper alloy (CP) with crutch or butterfly handles, screwed down, screwed for iron pipes or for brass ferrules and fixed in repairs complete all as specified and as directed by Engineer-in-Charge. |
| 96 | Supply and fixing fency table mounted tall boy, Pillar tap, stainless steel, chrome finish, 15 mm with long screwed shanks and fly-nuts, screwed down high pressure for iron pipe fixed in repairs complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar, Hindware and other equivalent. |
| 97 | Supply and fixing angle valves, cast copper alloy CP 15mm, screwed down, high pressure,with crutch or butterfly andle,screwed both ends for iron pipe or for unions and fixed In repair. Make: Jaquar, Hindware and other equivalent. |
| 98 | Supply and fixing in repair Gun metal, globe or gates valves, with iron wheel head, screwed down, high pressure, heavy duty, ISI marked, screwed both ends for iron pipe or for union of 20 mm bor dia, including taking down old & removal, complete all as specied and directed. |
| 99 | Supply and fixing in repair Gun metal, globe or gates valves, with iron wheel head, screwed down, high pressure, heavy duty, ISI marked, screwed both ends for iron pipe or for union of 15 mm bor dia, including taking down old & removal, complete all as specied and directed. |
| 100 | Supply and fixing in repair, vitreous china, Table-Top wash hand basin for bathroom, ceramic glossy Rectangle Countertop vessel sink , white, fency decorative type, approx size 600mm x 400x 120mm fixed over granite incliding CP waste coupling, waste pipe but exclusive of pillar tap/mixer, PVC connection, complete all as specified and as directed by Engr-in-Charge. |
| 101 | Supply and fixing wall hung, rectangular/trapezodial shaped curved edges urinal partition plate of frosted glass 8mm thick, approx min. size 900x450mm incl stainless steel hinges, brackets & installation accessaries for easy set up and normally about 40cm above floor line complete. |
| 102 | Supply and fixing in repair Vitreous China urinals, Half stall type (back or corner wall type) of size 420x395x635mm of white with incl CP brass coupling, PVC flexible discharge pipe including chromium plated water spreader, connection pipe and discharge down pipe, complete all as directed. |
| 103 | Supply and fixing in repair, vitreous china wash down water closet (pedestal pattern) inbuilt connectivity to syphonic action type flushing cistern (One-Piece EWC, floor mounted) with PVC in let ball valve, float and push button, 10 ltrs capacity, of colour snow white, of approx size 720(H)x405(h)x635(L)x350(B)mm and including slim soft close seat cover of same colour & pressure jet spray and all necessary fittings etc. complete all as specified and as directed by Engr-in-Charge. |
| 104 | Supply and fixing in repair, stainless steel, chorme finish, bottle trap for urinals or WHB, complete all as specified and as directed by Engineer-in-Charge. |
| 105 | Supply and fixing Towel rail 600 mm long, 20 mm dia, ‘D’ type, chromium plated, fixed to walls with screws and plastic cleats, fixed in repairs, complete all as specified. |
| 106 | Supply and fixing in repair, mild steel chromium plated Health faucet (ABS Body) suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 107 | Supply and fixing in repair, brass, chromium plated or stainless steel toilet paper holder colour, in repair, complete all as specified and as directed. |
| 108 | Supply and fixing PVC connections 450mm long including back nuts and washers fixed to 15 mm bore of pipe fixed in repairs. |
| 109 | Supply and fixing 10 mm thick, Toughned glass used as toughned looking mirror as in wall mounted, hinged doors, partitions automatic doors and similar work including cutting to required shape (rectangular or curve edge rectangular or square or circular), fitting & fixing by standoffs/spacers holding it off the wall through pre-drilling holes in mirror or by clips/brackets and cup washers complete all as specified. |
| 110 | Supply and fixing CP grating doom (openable type) 100mm dia with or without waste hole both.(minimum weight 25 gms) as in repair complete all as specified and as directed by Engineer-in-Charge. |
| 111 | Supply and fixing fency type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed in repair complete all as specified and as directed by Engineer-in-Charge. |
| 112 | Supply and fixing Fancy type elegant corner glass shelf of radius 300 mm with 300x600 mm size including 02 Nos. metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, complete all as specified and directed. |
| 113 | Supply and fixing in repair, soap dish size 160x160x90mm, vitreous china white, fixed to plugs with chromium plated brass screws, complete all as specified and as directed by Engineer-in-Charge. |
| 114 | Dismantling of wall, floor and ceiling boards (fiber, pulp, insulation, etc) or insulation ply/board/slab/blankets, any thickness, including cover fillets and removal from site complate all as specified and directed. |
| 115 | Supply and fixing GI metal or any other suitable materials suspended ceiling system (Plain or Perforated types same as existing ceiling or as directed by Engineer-in-charge) OREO GI lay in plain of make DEXUNE / HUNTERDOUGLS / LINDER 600 x 600x 0.5mm (TEGULAR) Edge tiles in global white colour (if required incl. black profile sound absorbing cloth back to ceiling board) to be laid on strong 24mm T-section flanges colour white having rotary stitching on the main runner with web height of 38mm. the tiles should have humidity resistance of 100% with light reflection of 62% and fix to roof ceiling area/ vertical walls etc.Note:-(i) To comprise main runner spaced at 1200mm centres securly fixed to the structural soffit at 1200 mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200 mm long cross tees to be interlocked between main runners at 600 mm centre to form 1200 x 600 mm module. Cut cross tees longer tahn 600mm require independant support. 600 x 600 mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angles of size 3000 x 19 x 19mm, secured to walls at 450mm maximum centres(ii) Suspension system accessories consisting of HLC sleeve anchor fasterners of thread size 6.5mm x 25/5 with soffit cleat made of galvanised steel of size 27 x 37 x 25 x 1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire. |
| 116 | Material & Labour for Plywood 6mm thick (No of ply 5), grade BWP, type BB with decorative laminate 1.5 mm thick on both faces surface (matte or glossy) finish, scratchless, colour and pattern as approved, jointless locking ply tiles fixed with approved adhesive as per manufacturer's instructions, fixed to floor over 1mm foam or with screws to timber frame work as in floor panelling/lining/wooden flooring, fixed in repairs, complete all as specified and directed by Engineer-in-charge. |
| 117 | Supply and fixing aluminium flat sections (thickness & width as directed by Engr-in-Charge) as at edges of stair steps incl screws or any necessary fitting complete all as specified and as directed by Engineer-in-Charge. |
| 118 | Material & Labour for external decorative fency teak wood lipping, 6mm thick of Ply/board fixed with nails complete all as specified and as directed by Engineer-in-Charge. |
| 119 | Supply and fixing for Prelaminated Medium density fibre board 18/19mm thick, interior grade pre laminated one side with decorative choice laminations and other side balancing white lamination, fixed to timber framework with screws as in walls panelling, almirah, kitchen cabinates etc, fixed in repair, complete all as specified and directed by Engineer-in-charge. |
| 120 | Material & Labour for design cover fillets of standard hard board, 15 to 40mm wide and 4.5mm thick, and fixing with screws, complete all as specified and directed by Engineer-in-charge. |
| 121 | Material & labour piano hings, mild steel bright finish width of flap 30mm fixed in repair including taking out the existing complete all as specified and directed by Engineer-in-Charge. |
| 122 | Supply & fixing magnetic catches 75 mm brass body for use in cup boards of kitchen, ward robes etc. fixed as in repairs complete all as specified and directed by Engineer-in-Charge. |
| 123 | Supply and fixing 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, bright finished, fixed in repair complete all as specified and as directed by Engineer-in-Charge. |
| 124 | Demolition of reinforced cement concrete of any description in any position as in chajja/shelves, RCC Tank, kitchen chimney etc., including removal taken to any lead of rubbish outside MoD land, complete all as specified. |
| 125 | Material & Labour for RCC 1:2:4 in slabs supported on walls, beams, deck slabs and in shelves (as at kitchen, WHB, Sink etc) and the like, incl necessary formwork, complete all as specified and as directed by Engineer-in-Charge. |
| 126 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required as in lintels, shelves etc including cranking, bending etc., and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified. |
| 127 | Material & Labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers chajjas, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. |
| 128 | Taking down copper/ aluminium point wiring(light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc complete. |
| 129 | Material & Labour for point wiring with PVC insulated and unsheathed cable single core multistranded FRLSH copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including medium grade PVC rigid non metalic conduit concealed in any type wall should be (cutting wall using electric driven cutter) conforming to IS-9537 with all accessories including modular cover plate, base plate and MS metal box of thickness 1.2mm as per site, 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for :- |
| 130 | One light/fan/Ext Fan point controlled by one switch |
| 131 | One switch socket outlet 3 pin,5 Amp on the independent board |
| 132 | One switch socket outlet 3 pin,5 Amp on same board |
| 133 | All as per item No. 128.00 above but with 2.5 sqmm (Nominal cross sectional area) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed. |
| 134 | All as per item No. 129.00 above but with 2.5 sqmm (Nominal cross sectional area) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on same board complete all as specified and directed. |
| 135 | All as per item No. 129.00 above but with 4 sqmm (Nominal cross sectional area) cable with 4 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed. |
| 136 | Supply and fix modular switch, 6 Amp, one way complete all as specified and as directed by Engineer-in-Charge. |
| 137 | Supply and fix modular switch, 16 Amp, one way complete all as specified and as directed by Engineer-in-Charge. |
| 138 | Supply and fix modular socket 6 Amp 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge. |
| 139 | Supply and fix modular socket 6/16 Amp 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge. |
| 140 | Supply and fix ceiling rose, 3 phase/ PVC/ polycorbonate complete all as specified and as directed by Engineer-in-Charge. |
| 141 | Supply and fix Switch socket combination flush type 6/16 Amps with PVC gang box complete all as specified and as directed by Engineer-in-Charge. |
| 142 | Supply and fix 25 A DBOXx SRCD is ready plug & play all-in-one device that provides protection to humans from electric shock due to direct or indirect contact as well as provides protection from overload and short circuit faults. It is designed such that user can easily upgrade his installation by replacing existing socket boxes and get built-in protectioin. |
| 143 | Supply and install hi wall 2 TR split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 4 star rating and EER.of capacity and connected accessories as per ground required at site complete all as specified and as directed by Engineer-in-Charge. |
| 144 | Supply and fixing in replacement 20 W Inverter LED batten with square profile & polycarbonate channel Lithium Ion battery with charging time 8 hours-10 hours and back up time upto 4 hours. |
| 145 | Supply and fix 20 watt LED light new generation, energy saving, aesthetically designed, recessed mounted down light pressure die-cast aluminum heat sink & high efficiency long life COB LED mounted on MCPCB with high efficacy of 140 lm/W used for enhanced lumen output with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. |
| 146 | Supply and fix 7 watt step LED light construction in die-casted aluminum powder coated, its integrated LED ensures long-lasting and energyefficient with IP65 Protected. with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. |
| 147 | Supply and fixing TPN DB 6 Way, 240 Volt, sheet metal enclosure with double door for DBs confirms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector complete all as specified and directed |
| 148 | Supply and fixing TPN DB 4 Way, 240 Volt, sheet metal enclosure with double door for DBs confirms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector complete all as specified and directed |
| 149 | Supply and fixing SPN DB 8 Way, 240 Volt, sheet metal enclosure with double door for DBs confirms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector complete all as specified and directed |
| 150 | Supply and fix MCB single pole 6 to 32 Amps 240 volts, C series, 10 kA rupturing capacity complete all as specified and as directed by Engineer-in-Charge. |
| 151 | Supply and fix MCB single pole & neutral 40 Amps 240 volts, C series,10 kA rupturing capacity complete all as specified and as directed by Engineer-in-Charge. |
| 152 | Supply and fixing MCB Four Pole 100 Amps 240 volts, 10 kA rupturing capacity providing in DB complete all as specified. |
| 153 | Material & Labour for submain wiring with 2 single core PVC insulated FRLS cable 2.5 Sqmm copper conductor PVC sheathed in and including rigid medium grade PVC concealed conduit heavy duty of suitable size incl cutting chiseling of wall and making good to disturbed surface of walls / floor etc with plastering painting etc so as to match with the existing finishes, drawn with 2.5 Sqmm PVC insulated FRLS copper conductor cable for earth wire fixed with shaddle and connecting to common earth teriminals complete all as specified. |
| 154 | Material & Labour for submain wiring with 2 single core PVC insulated FRLS cable 4 Sqmm copper conductor PVC sheathed in and including rigid medium grade PVC concealed conduit heavy duty of suitable size incl cutting chiseling of wall and making good to disturbed surface of walls / floor etc with plastering painting etc so as to match with the existing finishes, drawn with 4 Sqmm PVC insulated FRLS copper conductor cable for earth wire fixed with shaddle and connecting to common earth teriminals complete all as specified. |
| 155 | Material & Labour for submain wiring with 2 single core PVC insulated FRLS cable 6 Sqmm copper conductor PVC sheathed in and including rigid medium grade PVC concealed conduit heavy duty of suitable size incl cutting chiseling of wall and making good to disturbed surface of walls / floor etc with plastering painting etc so as to match with the existing finishes, drawn with 6 Sqmm PVC insulated FRLS copper conductor cable for earth wire fixed with shaddle and connecting to common earth teriminals complete all as specified. |
| 156 | Material & Labour for submain wiring with 2 single core PVC insulated FRLS cable 10 Sqmm copper conductor PVC sheathed in and including rigid medium grade PVC concealed conduit heavy duty of suitable size incl cutting chiseling of wall and making good to disturbed surface of walls / floor etc with plastering painting etc so as to match with the existing finishes, drawn with 10 Sqmm PVC insulated FRLS copper conductor cable for earth wire fixed with shaddle and connecting to common earth teriminals complete all as specified. |
| 157 | Material & Labour for submain wiring with 4 single core PVC insulated FRLS cable 10 Sqmm copper conductor PVC sheathed in and including rigid medium grade PVC concealed conduit heavy duty of suitable size incl cutting chiseling of wall and making good to disturbed surface of walls / floor etc with plastering painting etc so as to match with the existing finishes, drawn with 10 Sqmm PVC insulated FRLS copper conductor cable for earth wire fixed with shaddle and connecting to common earth teriminals complete all as specified. |
| 158 | Material & Labour for submain wiring with 4 single core PVC insulated FRLS cable 16 Sqmm copper conductor PVC sheathed in and including rigid medium grade PVC concealed conduit heavy duty of suitable size incl cutting chiseling of wall and making good to disturbed surface of walls / floor etc with plastering painting etc so as to match with the existing finishes, drawn with 16 Sqmm PVC insulated FRLS copper conductor cable for earth wire fixed with shaddle and connecting to common earth teriminals complete all as specified. |
| 159 | Taking down old and unserviceable, Main Panel/Switch board any type Supply, installation, testing & commissioning factory made CPRI approved powder coated LT panel board cubical type, front openable wall mounted, indoor, weather and vermin proof, made out of 1.6mm thick MS Sheet and Section complete painted with two coats of synthetic enamel paint (spray painting) over a coat of primer. Panel shall be suitable for housing and including aluminium bus bar 04 Nos 200 Amps rating, MCCB 125 Amps FP 25 KA-01 No, MCB TPN 100 Amps -04 Nos, MCB SPN 63 Amps - 05 Nos, Digital voltmeter (0-500V) with selector switch -01 No, Digital ammeter (0-200 A) with CTs and selector switch -01 No, indicator lamp (set of three) -01 set. Panel shall be complete in all respects, including internal connections and control wiring with suitable size of copper wire, 05 Nos holes with rubber bushing on top of the panel for sub-main entry and 02 holes in bottom of the panel with cable glands for cable entry should be provided. Panel shall be fabricated in such a way that the MCCB and MCBs shall be operated in door closed position. All cable connections shall be done using suitable size lugs. The size and shape of panel shall be as directed and approved by Engr-In-Charge including supply and fixing temperproof electronic energy meter - 01 No of 100 Amps 440 Volts all inlet and outlet connection to the meter using suitable size copper conductor cable and lugs, with locking provision complete all as specified and directed. |
| 160 | Earthing complete with and including galvanised steel earth plate electrode 60 cmx 60cm x 6 mm thick surrounded by mixture of charcoal and salt in alternate layers, buried directly in ground vertically in a pit of depth not less than 2.25 meter deep below ground level with top as of the plate at a depth of not less than 1.5 mtrs below normal ground level connected to galvanized iron or steel earth lead wire 4.0 mm dia,( NO 8 SWG) by means of bolts ,nuts, check nuts and washers of galvanised iron or steel earth wire protected by galvanised steel pipe 15 mm bore (light grade) and connected to main switch or main control board all as shown in electrical plate No. 3 of SSR - 2009(Pt I) & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers, 20 mm bore GI pipe (Light grade ) for watering , protection pipe funnel, wire mesh , PCC 1:2:4 type B1 chamber in cement concrete ,50 mm thick precast RCC M-25 ( Normal mix) cover duly reinforced with XPM (weight not less than 3 kg /sqm ) and CI frame etc , and including provision of test point , connecting to test point and testing on completion etc, complete all as specified. NOTE : The unit rate include earthing lead and protection pipe upto 7.5 metre from top of earth plate. |
| 161 | Amount of credit of Rs. 77480.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 19 daysAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender