Tender For Repair/ Replacement Of Aluminium Joinerries, Plastering And Wall / Floor Tiling Work Repair At Rrrc In The Area Of Age B/E-I Under Ge (Central) Delhi Cantt-10
Tender Value
40 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
15 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Aluminium Joinerries, Plastering And Wall / Floor Tiling Work Repair At Rrrc In The Area Of Age B/E-I Under Ge (Central) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame) |
| 2 | Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) |
| 3 | Taking down shutters of any description not exc 2 Sqm each. |
| 4 | M&L Mild steel frame work as in door chowkhats with angle iron welded together ends of angle shouldered and fixed to opening and welding 3 Nos mild steel butt hinges 100 mm size, and 6 nos hold fasts made out of FI 25x3 mm 30 cm long for fixing of chowkhats( Butt hinges paid sep) all as spd. |
| 5 | S&F 35 mm thick 2nd class hard wood glazed and skelton shutter devided into square with plain, chamferred or rounded sash bar and fitted with cut and mitred beads for securing glass, size of members as per SSS Part - I section 8 clause 8.24 (b). |
| 6 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing complete all as specified and as directed. |
| 7 | S&F solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with a solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either sides and as gap inserts for top and bottom rail panneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement as per specification and drawing complete all as specified and as directed. |
| 8 | S&F Floor door stopper of aluminium alloy body and tongue, overall length of cover plate 150 mm , anodized, with hard drawn steel spring, fixed to shutters, complete all as specified and as directed. |
| 9 | M&L aluminium alloy powder coated door including frame and channel of section (Door frame single grove 101.6mm x44.45 mm x2.1,shutter top section 47.62mm x44.45x1.95mm thick shutter bottem vertical section 85 mm x44.45 mm x1.80mm yhick ,shutter middle section 83.50mm x 44.45 mm x1.80mm thick shutter glazing clips weighing not less than 0.097 kg/Rm as directed and approved by GE and as per IS specification including provn of 5.5mm thick tinted glass/12mm thick thick prelaminated particle board as required including alu handle 150 mm ,tower bolt 150 mm ,floor spring heavy duty \\"SAMRAT\\" ,looking arrangement \\"GODREJ\\" rubber gasket and door stopper complete all as specified and directed. |
| 10 | M&L aluminium alloy powder coated windows including aluminium coated frames, silding track frame and bottom weighing not less than 1.015 kg/Rm ,sides and top not less than 0.826 kg/Rm double revated and 0.55 kg/Rm for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter silding type with aluminium sectins as per series-A (15mm) 3 track of jindal section number for silding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrngement spring action and glazing clips joint cleats rubber gaskets etc inclding provision of 5.5 mm thick tinted frosted glass of superior quality and stainless steel jail including all standard fittings complete all as specified and directed |
| 11 | S&F aluminium ventilator partly glazed/ gauzed including including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. provision for fixing the exhaust fancomplete all as specified and as directed |
| 12 | Servicing and greasing of aluminium door including replacement nut , screws rubber gaskets, pivot, taper clip etc including taking down carefully of door shutter for replacing unserviceable parts/components by new parts /components for smooth functioning of door and refixing the same in existing opening/position, complete, all as specified and directed. |
| 13 | S & F in repair Steel window (Factory made) double rebate, with side hung, shutter incl hinges, tower bolt, steel handle and peg stay complete with glaze and gauge shutters (both are complete) devotailed or welded including making good to cutting holes with PCC 1:2:4 and complete finishing to cill and jamb corners with plaster and match all as specified |
| 14 | S & F in repair mild steel framed work such as grillsn gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders freamed balusters, walk ways, railings, framework of watertanks and similar work including aldrop and hinges holdfast etc conforming to Fe 290. Gde-E-165. |
| 15 | Cutting holes in Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 complete, all as specified and directed. |
| 16 | S&F aluminium body hydraulically Door closer regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repairs complete, all as specified and directed. |
| 17 | S&F MS butt hinges medium weight 100 mm size fixed with MS screws. |
| 18 | S&F aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws. |
| 19 | S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with mS screws. |
| 20 | S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut. |
| 21 | M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer |
| 22 | S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed. |
| 23 | Taking up or down Galvanised steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm |
| 24 | Taking up or down Galvanised steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm |
| 25 | Supply and fix galvanized steel tubing, 15 mm bore medium grade all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors compsite fitting such as (Nipple, Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc complete all as directed. |
| 26 | Supply and fix galvanized steel tubing,20 mm bore medium grade all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors compsite fitting such as (Nipple, Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc complete all as directed. |
| 27 | Supply and fix in repair figured glass pin head type 4mm thick ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary, complete all as specified |
| 28 | Dismantling floor, hearth or wall tilling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 29 | Demolition of PCC in ground floors and paving not exc 15cm thickness (below or above ground level) |
| 30 | S&F non skid coloured ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm screed bed in CM 1:6 complete all as specified and as directed. |
| 31 | S&F coloured glazed ceramic tiles of size 350 x 250 x 7/450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster in cement mortar 1:4 complete all as specified and as directed. |
| 32 | M&L Vetrified Ceramic tiles 8 to 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match ,light shade, incl 15 mm thick screed bed in CM (1:6) complete all as specifeid and directed. |
| 33 | Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc up to 10m height complete all as specified and directed. |
| 34 | M&L for rendering 10mm thick in CM 1:6 other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete. |
| 35 | M&L for rendering 5 mm thick in CM 1:4 on ceiling other than fair faces of brick work or concrete surfaces finished without using extra cement complete. |
| 36 | M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper over one coat of wall care putty complete all as specified. |
| 37 | M&L preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 38 | Schedule of Credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender