Tender For Welcome Maintance, Repair To Roof, Joinery, Tiling, Plumbing And Connected Work At Md Accn Of Sanjay Vihar , 1 Ahq Signal Enclave, 500 Sig Coy And 5 Sig Gp And Other Adjoining Units Of Age B/R-Ii Under Ge (Central) Delhi Cantt-10
Tender Value
50 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
20 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintance, Repair To Roof, Joinery, Tiling, Plumbing And Connected Work At Md Accn Of Sanjay Vihar , 1 Ahq Signal Enclave, 500 Sig Coy And 5 Sig Gp And Other Adjoining Units Of Age B/R-Ii Under Ge (Central) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar in any description and position, upto G+5 storey bldg complete all as specified.. |
| 2 | Brick work with old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 (1 cement : 6 coarse sand), upto G+5 storey bldg complete all as specified. |
| 3 | All as per serial item No 2 but except bricks, all as specified. (Servicable bricks retrieved from Serial Item No 01 shall be used).upto G+5 storey bldg complete all as specified. |
| 4 | Taking down cement plaster in any thickness from brick or stone etc including raking out joints, hacking for key, scrubbing down with water etc upto G+5 storey bldg complete all as specified. |
| 5 | M & L for 15 mm thick internal rendering in cement mortar 1:6 other than fair face of brick walls/ concrete surfaces finished complete all as specified. |
| 6 | M & L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and like surface even and fari finished d complete all as specified. |
| 7 | Preparation of newly plastered surfaces of walls and applying two coats of distemper over a coat of primer, complete all as specified and as directed. |
| 8 | M&L Preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 9 | Preparing old decorated plastered or un-plastered surfaces of walls by scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, mass and efflorescence salts and trading oil and greasy spots complete removal of existing treatment etc and applying one coat of washable distemper on wall surfaces including preparation of surfaces by primer and filling cracks/holes with putty, up to G+5 storey bldg complete all as specified. |
| 10 | Description all as per serial item No. 9 above, but two coats of washable distemper, complete all as specified and directed. |
| 11 | M&L for complete removal of existing treatment from internal surfaces of wall by mechanical sander of berger paints or equivalent makes viz xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying a coat of primer over already prepared surfaces of walls applying uniform thickness (avg 2mm thick ) wall care putty on internal surfaces of wall whereever required for preparaing the surface even and smooth and providing two coats of Oil Bound Distemper on wall surface using roller brush complete all as specified and directed by Engineer-in-Charge. |
| 12 | Preparing old decorated plastered or un-plastered surfaces of walls by scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, mass and efflorescence salts and trading oil and greasy spots etc and applying two coat of white wash on wall surfaces including preparation of surfaces by filling cracks/holes with white putty, up to G+5 storey bldg complete all as specified. |
| 13 | Description all as per serial item No. 12 above, but on ceiling, complete all as specified and directed. |
| 14 | Preparation of old painted wood or wooden based surfaces of any description not otherwise described over 10cm width or girth, and applying one coat of synthetic enamel paint, upto G+5 storey bldg complete all as specified. |
| 15 | M&L for Preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, upto G+5 storey bldg complete all as specified. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed |
| 17 | M&L for 595mm to 605mm x 595 mm to 605 mm x7-8 mm rectified coloured ceramic tiles, joint free, as approved by Garrison Engineer in floors over 15mm thick screed bed in CM 1:6, G+5 storey bldg complete all as specified. |
| 18 | M&L for 595 mm to 605 mm x 100 mm x 7-8 mm thick rectified coloured tiles as skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 G+5 storey bldg complete all as specified.. |
| 19 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match laid over and including 15mm thick screed bed or bedding layers in cement mortar ( 1:6) G+5 storey bldg complete all as specified. |
| 20 | M&L for coloured glazed ceramic tiles 300x450x6 to 8mm or (300x600mm)x8 to 10mm thick on vertical surfaces on skirting /dados and risers to steps laid and over including rendering 10mm thick cement mortar in CM 1:4 G+5 storey bldg complete all as specified. |
| 21 | S&F of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed complete to walls, ceilings or in floors with suitable clamps/bracket including taking down old pipes and necessary cutting through RCC roof and brick work etc and making good all as specified. |
| 22 | S&F of 110mm dia PVC (SWR) bends any radius with solvent joints, complete all as specified. |
| 23 | Taking up or down 20 mm GI tubing medium grade with all fittings and connections incl cleaning for refixing or removal to store complete all as specified. |
| 24 | All as per item no 23 here-in-before but dia of GI pipe is 15mm. |
| 25 | S&F 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings and fixed to wall or ceiling or laid on floor etc incl cutting chasing where required complete all as specified an directed. |
| 26 | All as per item no.25 here-in-before but dia of GI pipe is 15mm. |
| 27 | Cutting chases,pinning for concealed water tubing and making good to facing where required and pointing in cement mortar 1;3 ,cutting exc 10cm but n.exc 20cm girth complete all as specified and directed. |
| 28 | S&F 500 ltr capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position with 20mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule Minimum wt 20mm-210grm and s&f in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed incl Dismantling of PVC water tanks of exc 250 litres and n.exc 500 litres capacity of any condition or type incl complete all as specified and directed. |
| 29 | S & F in repairs vitreous China coloured European type WC with \\"P\\" or \\"S\\" trap and Seat cover for 100 mm bore , including connection to drain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete all as specified and directed by Engineer-in-Charge. |
| 30 | S & F in repairs vitreous chinaware coloured wash hand basin of size 540mm x 400mm complete including , CP Waste coupling , PVC waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Engr in charge |
| 31 | S&F in repair vitreous china squatting pan of orissa pattern long pan size 580 x 440 mm white with \\"p\\"or \\"S\\" trap front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge. |
| 32 | S & F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed by Engineer-in-Charge. |
| 33 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge. |
| 34 | S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F in repair PVC connection pipe of 1/2\\"x18\\" size with 2 Nos brass check nuts with washers, complete all as specified and directed by Engineer-in-Charge. |
| 37 | Taking down shutter Not.exc 2 sqm each of any description complete all as specified. |
| 38 | Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame) |
| 39 | M&L 19mm thick MDF boards, grade 1 quality, exterior grade, commercial type, shutter of cupboard/kitchen cup board/loft board complete all as specified and directed. |
| 40 | Factory made signle extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows and other frames/ chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/ cum, screw withdrawl strength of 2200N (Face) and 1100 N (edge), minimum compressive strengthy of 58N/ mm2, modules of elasticity 900 N/ mm2 and resistance to spread of flame of being termite / borer proof, water/ moisture proof and fire retardant and fixed with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS hold fast/ lugs or SS dash fasteners shall be paid for separtely).Note: For WPC solid door/ Window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but not extra payment on this account shall be made. |
| 41 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdral strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistace to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction Engr-in-Charge. |
| 42 | S&F butt hinges medium weight, cold rolled SS and fixed size of hinge 100mm complete all as specified. |
| 43 | S&F 150mm long anodised aluminum barrel tower bolt, extruded section complete all as specified. |
| 44 | S&F aluminum alloy handles extruded fabricated type, anodised of 125 mm size complete all as specified. |
| 45 | S & F 4.00 mm thick plain sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane, complete all as specified and directed. |
| 46 | S & F false celling using plain galvanised steel celling system consisting of 600X600 mm lay in tiles of pre coated glavinished steel sheet 0.50mm thick in white or coloured to be laid on grid system with 15mm wide T section of size 600X45X15 mm flanges having rotary stiching on the main runner. The main runner spaced 600mnm centre flush fitting 600mm long cross tees to be interlocked between runner at 600 mm center to from 600X600mm moulule perimeter trim to wall angle of size 3000X45X15 mm secured to wall and including suspension system as per manufacture instruction complete all as specified and directed. |
| 47 | M&L for 8.5mm thick prelam pvc coloured profile panelling with all thickness of 1.25 mm each pannel 250mm wide with interlocking joints, coloured ,shed, pattern/designs approved fixed to wall or celling with solvent/screw including similar pattern moulding at all around of opening , junction including dismantling complkte all as per manufacture instruction all as per specified and directed |
| 48 | S&F for Drappery curtain rods decorative type stainless steel 25mm nominal dia of approved quality (Make-VISTA) (3mm wall thickness) including fixing of two number decorative brackets fixed in brick/concrete wall, two number of latto on both end s of curtain rods, complete all as specified and directed by Engr-in-Charge. |
| 49 | S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position with 20mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fiexed 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed incl Dismantling of PVC water tanks of exc 250 litres and n.exc 500 litres capacity of any condition or type incl complete all as specified and directed. |
| 50 | Schedule of Credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender