Tender For Maintenance Of Joints, Painting And Other Connected Works Related To Rigid Portion Of Runway/Ptt/Dispersal At Af Stn Tezpur
Tender Value
40 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
15 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Joints, Painting And Other Connected Works Related To Rigid Portion Of Runway/Ptt/Dispersal At Af Stn Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for repair to cracks (1mm-3mm wide) in existing rigid/ flexible pavement of dispersal/ runway/ PTT by cleaning the cracks with hand brushes or water under pressure and drying with compressed air etc. filling in the cracks with epoxy mixture of araldite and hardener, araldite 02 (Two) parts and hardener 01 (One) part, complete all as specified and directed. Note: Running length will be used for measurement. |
| 2 | Material and labour for raking out existing sealing compound from joints with using appropriate tools and mechanical means for joints of size 10-20mm wide and 30mm deep, cleaning the joints from sides, bottom and removing the loose particle of sealant dust, foreign matters etc. with suitable tools and mechanical driven machine, drying the joints surface of moisture completely by means of mechanical driven air blower, including putting in sealing compound Grade 'B' of approved make in joints as per manufacturer's instruction and cleaning the surface, complete all as specified and directed. Note: In case of additional depth beyond 30mm, the same shall be filled with dry sand before joint filling. |
| 3 | Materials and Labour for raking out existing old sealing compound Grade ‘B' with using appropriate tools and mechanical means for joints of size 20-35 mm wide and 45-50 mm deep, cleaning the joints of sides and bottom by diesel operated mechanical air blower incl. removing the loose particles of sealant, dust outside runway,dispersal, PTT etc drying the joints surface of moisture completely by means of mechanical driven air blower, applying one coat of primer and insert compressible cross linked polyurethane form backer rod of dia 25-40 mm, closed cell, medium density of appropriate dia as per site condition, putting in polyurethane joint sealant of approved make in joints as per manufacturer's instruction, and cleaning the surface, complete all as specified and as directed. |
| 4 | Material and labour for racking out existing joint sealant from expansion joints with using appropriate tools and mechanical means for joints of size 20-25mm wide and 20mm deep of sealant, including taking out compressible backer rod of dia 25-30mm (Total depth 45-50mm) from joints, cleaning the joints of side, bottom and removing the loose particle of sealant dust etc, with suitable tools and mechanical driven machine, drying the joints surface of moisture completely by means of mechanical driven air blower, applying one coat of primer and insert compressible cross linked polyurethane form back up rod, closed cell, medium density of appropriate dia as per site condition, putting in polyurethane joints sealant of approved make in joints as per manufacturer's instructions and cleaning the surface, complete all as specified and directed. |
| 5 | Material and labour for racking out existing joint sealant from Construction/Dummy joints with using appropriate tools and mechanical means for joints of size 10-12mm wide and 10mm deep of sealant, including taking out compressible backer rod of dia 12-15mm (Total depth 22-25mm) from joints, cleaning the joints of side, bottom and removing the loose particle of sealant dust etc, with suitable tools and mechanical driven machine, drying the joints surface of moisture completely by means of mechanical driven air blower, applying one coat of primer and insert compressible cross linked polyurethane form back up rod, closed cell, medium density of appropriate dia as per site condition, putting in polyurethane joints sealant of approved make in joints as per manufacturer's instructions ans cleaning the surface, complete all as specified and directed. |
| 6 | Material and labour for cutting out defective portion of existing rigid pavement for depth 25mm to 50mm from top surface of slab by mechanical means / manually by chiseling, make regular shape and size, removing all debris to a distance exceeding 100 metres but not exceeding 200 metres from starting point, cleaning loose particle thoroughly with mechanical air blower, applying a coat primer uniformly on the horizontal and vertical faces with bristle brush, filling with epoxy resin mortar (1:5), one part of epoxy resin and five parts of Quartz sand as per manufacturer's instructions, on primed surface and finished by means of trowels and flats, finished true levelled with existing adjoining rigid pavement, complete all as specified and directed. |
| 7 | Material and labour for racking/cutting out defective portion of existing rigid pavement for depth 25mm from top surface of slab by mechanical means / manually by chiseling, make regular shape and size, removing all debris to a distance exceeding 100 metres but not exceeding 200 metres from starting point, cleaning loose particle thoroughly with mechanical air blower, applying a coat primer uniformly on the horizontal and vertical faces with bristle brush as per manufacturer's instructions, pouring in pre-mixed elastomeric concrete (self levelling) on primed surface and finished by means of trowels and flats, complete all as specified and directed. |
| 8 | Material and labour for preparation of old painted surfaces of rigid/ flexible pavement (concrete or asphaltic) of runway, taxi track, links etc., painting lines, dashes, arrows, figures, letters etc. on roads, pavements and the like exceeding 10cm wide with one coat of water based acrylic paint (white/ yellow/ orange/ black) as per manufacturer's instructions, complete all as specified and directed. |
| 9 | Materials and Labour for preparation of old painted surfaces of rigid pavement (concrete or asphaltic) of runway,taxi track,links etc., painting lines, centre line,dashes, arrows,figures, letters,etc. on roads pavements and the like not exceeding 10cm wide with one coat of water based acrylic paint (Yellow / black colour) as per manufacturer's instructions, complete all as specified and directed. |
| 10 | Materials and Labour for preparation of surfaces of rigid/flexible pavement (concrete or asphaltic) of runway,taxi track,links etc., painting lines, dashes, arrows, figures, letters, etc. on roads, pavements and the like exceeding 10cm wide with two coats of water based acrylic road marking paint (white/yellow/orange/gre) as per manufacturer's instructions,complete all as specified and directed. |
| 11 | Materials and Labour for preparation of old painted surfaces of rigid pavement (concrete or asphaltic) of runway,taxi track,links etc., painting lines, centre line,dashes, arrows,figures, letters,etc. on roads pavements and the like not exceeding 10cm wide with one coat of water based acrylic paint (Orange colour) as per manufacturer's instructions, complete all as specified and directed.Note:- (Applicable for BOQ Serial Item No 09 to 11) Preparation of surface and painting of the existing runway painthig shall be done carefully and the Debris to be removed simultaneously leaving No FOD so as to ensure that the Runway is available for operation immediately. |
| 12 | Repair to pot holes in existing rigid/flexible pavement of dispersal/ runway/ PTT upto 20 mm depth and superficial area not exc.320 sqmm each, cleaning the pot hole with hand brushes or water under pressure and drying with compressed air etc. filling the pot holes with epoxy mixture of araldite and hardener, araldite 02 (Two) parts and hardener 01 (one) parts, complete all as specified and as directed. |
| 13 | Repair to pot holes in existing rigid/flexible pavement of dispersal/ runway/ PTT upto 30 mm depth and superficial area not exc.1260 sqmm each, cleaning the pot hole with hand brushes or water under pressure and drying with compressed air etc. filling the pot holes with epoxy mixture of araldite and hardener, araldite 02 (Two) parts and hardener 01 (one) parts, complete all as specified and as directed. |
| 14 | Removal of paintings from rigid/flexible pavement of dispersal/ runway/ PTT surface carried out through mechnical method without use of any chemical and without any damage to the existing runway/dispersal/PTT surface, complete all as specified and directed. Note:- (i) The Debris to be vacuumed simultaneously, leaving No FOD so as to ensure that the Runway is available for operation immediately. |
| 15 | Cleaning shrubs, vegetation, grass, bush, weed etc. from sides of runway, PTT links and dispersal area, including disposal of rubbish/ useless materials to a distance not exceeding 50m and depositing where directed at a level not exc.1.5m from the starting point, complete all as specified and directed. Notes:- (i)The work will be executed by providing minimum 03 (Three) Mazdoor (unskilled category of worker).(ii) Duty hours register of the workers shall be maintained. Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender