Tender For Repair / Replacement To Joinery,Flooring In Salyarchatta And Shashitar Under Ge Af Jammu
Tender Value
32 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
16 days left
EMD
64000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement To Joinery,Flooring In Salyarchatta And Shashitar Under Ge Af Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc bu exc cluding ashlar facings, dressed stone work and precast concrete articlescomplete all as specified and directed by Eng-in charge .(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri)Add Note : Including removal demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same. |
| 2 | M&L for brick work with sub class 'B' bricksstraight or curved on plan exc. 6.00m meanradius built in cement mortor 1:6 complete all as specified and directed by Eng-in charge .(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 3 | Material & labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by Eng-in charge ..(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 4 | M&L RR stone masonary uncoursed well bonded bedded and solidly hearted build in CM 1:6 including demoliton of any wall /stone work complete all as specified and directed by Eng-in charge . Add Note : Including removal demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same.(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 5 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level).complete all as specified and directed by Eng-in charge ..(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri)Notes:-Demolished material should be thrown out of the defence line at govt approved dumping area. |
| 6 | M&L PCC Type C- 1 (1:3:6 ) using 20 mm greaded crushed stone aggregate, as in bond stone in CM 1:6 complete all as specified and directed by Eng-in charge .(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 7 | Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level complete all as specified and directed by Eng-in charge . |
| 8 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls as in weep holes complete all as specified and directed by Eng-in charge . |
| 9 | M&L raised pointing RR masonary in CM 1:4 complete all as specified and directed by Eng-in charge . |
| 10 | Dismantling wrought iron or mild steel work of any description as provided for Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) complete all as specified and directed by Eng-in charge . |
| 11 | M&L for MS framed structure mild steel hollow section, trussed, purlins,water tank stand, crane gantries and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats of Grade Fe 410 -W (Gde- E- 250) quality- A etc. complete all as specified and directed by Eng-in charge . |
| 12 | Taking down chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as spd and as directed.(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri)Note:- Including make good the Jam of window/Door to receive new door/window by brick work,plaster and matching finishes as required also no extra payment should be made to the contractor against the same. |
| 13 | Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed by Eng-in charge .Note:- Including make good the Jam of window/Door to receive new door/window by brick work,plaster and matching finishes as required also no extra payment should be made to the contractor against the same. |
| 14 | S&F Pressed steel frames (Factory made) made out of 1.25mm thick mm black MS sheet for doors, with double rebates including necessary lugs, Butt hinges, lock strike plate, etc complete, size of frame 125x60mm incl one shop coat of red oxide zinc chrome primer,incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkahts with PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate after applying and including one coat of black paint to prevent from corrosion complete all as specified and directed by Engr-in-Charge.(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 15 | S&F Pressed steel frames (Factory made) made out of 1.25mm thick mm black MS sheet for doors, with one or more rebates including necessary lugs, Butt hinges, lock strike plate, etc complete, size of frame size 105x60mm incl one shop coat of red oxide zinc chrome primer,incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkahts with PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate after applying and including one coat of black paint to prevent from corrosion complete all as specified and directed by Engr-in-Charge. |
| 16 | S&F 2 nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- wire mesh shall be measured and paid separately in respective supply only item. |
| 17 | S&F Solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing r&all as specified and directed by Engineer -in-Charge. |
| 18 | S&F Factory Made Solid PVC Moulded door shutter, 288 to 30 mm thick (stiles)with 2,4 or 6raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing all as per and as directed by Engineerin charge. |
| 19 | Supply and fixing stainless steel wire cloth non- magnetic 0.63 mm nominal dia of wire and avg wide 1.40 mm aperture of tinned tacks of galvanised wire staple to steel windows/fixed with wooden beads of 2nd class HW to wooden doors/windows all as spd.complete all as specified and directed by Eng-in charge . |
| 20 | S&F IInd class hardwood panelled door shutters of 35mm thick (any number of panesl) with panels of timber flat on both sides (feathered edged0 or of veneeered particle boad medium density, wood particle board with commercial face veneers, complete all as specified and directed by Eng-in charge . |
| 21 | S&F A Factory made single extruded WPC (Wood Polymer Composite) solid WPC Moulded door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with 4 Nos of 100mm stainless steel butt hinges, 2 Nos 150mm stainless handle ,200 mm SS tower bolt and 150mm stainless steel door stopper of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge (Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 22 | M&L Preparation of New wood or previously untreated surfaces of any description , not otherwise description, over 10 cm width or grith apply two coat of synthetic enemel paint (ordinary tint) over a coat of pink primer complete all as specified and directed by Eng-in charge ..(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 23 | S&F 150 mm Stainless Steel non- magnetic barrel tower bolts of extruded section and fixed complete all as specified and directed by Eng-in charge . |
| 24 | S&F 200 mm Stainless Steel, non- magnetic barrel tower bolts of extruded section and fixed complete all as specified and directed by Eng-in charge . |
| 25 | S&F 300 mm Stainless Steel, non- magnetic sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed by Eng-in charge . |
| 26 | S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Eng-in charge . |
| 27 | S&F 150 mm Stainless Steel non- magnetic handles, cast type, anodised complete all as specified and directed by Eng-in charge . |
| 28 | S&F 125 mm Stainless non- magnetic Steel handles, cast type, anodised complete all as specified and directed by Eng-in charge . |
| 29 | S&F 75 size stainless steel non- magnetic butt hinges complete all as specified and directed by Eng-in charge . |
| 30 | All as per item No 29 hereinbefore above but 100mm size complete all as specified and directed by Eng-in charge . |
| 31 | S&F in repair stainless steel 25mm dia fancy type curtain rods fixed to wall with two no's of bracket,two no's of end ball and funnel including taking down of existing curtain rod.complete all as specified and directed by Eng-in charge .. |
| 32 | M&L floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm.complete all as specified and directed by Eng-in charge . |
| 33 | Dismantling of Wall Mounted cupboard any size & any boarding description fixed in any position with nails complete all as specified and directed by Eng-in charge . |
| 34 | Dismantling of frame work timber scantling 40 Sq cm and over in section in any position complete all as specified and directed by Eng-in charge . |
| 35 | All as per item No 34 above but under 40 Sqcm in sec |
| 36 | S&F WPC board 18-20mm thick,one side UV printed designing and back side plain colour printed(weight of board should be 11-12kg per sqm of board) for cup board or kitchen cabinet Front and sides of cabinate boxes and frame full size fitted under cooking platform and other platform including fittings etccomplete all as specified and directed by Eng-in charge . (Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 37 | S&F WPC board 18-20mm thick,both side plain colour printed(weight of board should be 11-12kg per sqm of board) for cup board or kitchen cabinet self ,drawer, fitted under cooking platform and other platform including fittings etc complete all as specified and directed (Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 38 | S&F WPC board 12mm thick,both side plain colour printed(weight of board should be 5-6kg per sqm of board) for cup board or kitchen cabinet back side shutter fitted under cooking platform and other platform including fittings etccomplete all as specified and directed by Eng-in charge . (Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 39 | S&F auto closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele (Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 40 | S&F Ball bearing runners 45 mm Telescopic channel (KTS-20) full extension load capacity 50 kgs, Make :Hexa, Hettich, Hafele |
| 41 | S&F for door/shutter catcher, magnetic stopper/holder with striking plate for WPC board cabinets, cupboard shutters complete all as specified and directed by Eng-in charge . |
| 42 | S&F for brass knobs 35-40mm dia complete all as specified and directed by Eng-in charge .. |
| 43 | S&F 100 mm long Extruded brass handles designer type, fabricated type polished complete all as specified and directed by Eng-in charge .. |
| 44 | S&F 75 mm long Extruded brass handles designer type, fabricated type polished complete all as specified and directed by Eng-in charge . |
| 45 | S&F in repair 5mm thick looking mirror of selected quality with and including stainless steel spacers and edging any size as directed by Engg-in-charge |
| 46 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and directed by Eng-in charge . |
| 47 | S&F in repair PVC wall mounted cabinate of size (55x35x14 inch) looking mirror of selected quality with and including stainless steel spacers and edging any size as directed by Engg-in-charge. Make-PRAYAG /SINTAX / SUPREME or any appr. In make |
| 48 | Dismantling of, stone slabs and tiles of any description or any thickness in floors,aprons including screed bed or flooring etc complete all as specified and directed by Eng-in charge .(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri)Notes:-Demolished material should be thrown out of the defence line at govt approved dumping area. |
| 49 | M&L for pre- polished granite slab machine cut of any shade as approved by GE of 18-20 mm thick inc over cement screed bed including edge Moulding,rounding to shape Cutting and nosing with suitable hole for cylender gas pipe, kitchen sink ,WHB, Grinding and Machine polishing to edge to give high gloss finish (Granite finish) with suitable grinding stones and set in 15mm thick CM 1:4 in single piece for platform including taking down of existing tile work including removal of debris out of the defence line at govt approved dumping area and no extra cost will be paid for the same complete all as specified and as directed by Engr-in-charge.(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 50 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations (Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 51 | M&L for Kota stone slab 20-25mm thick in floor,steps laid over set with neat grey cement slurry mixed with colour over 20mm thick screed in CM 1:4 pigment to match the shade of the slab including Grinding polishing to achieve granite finish including moulding to exposed edges. complete all as spd and directed.(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri)Note: Kota stone in steps should be provided in single piece & 2mm groove in treads. |
| 52 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete. Note :-Including Removal of debris or excavated material out of the defence line at govt approved dumping area and no extra cost will paid to the contractor against the same.(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 53 | M&L 2nd class hard wood plain fillets.square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 13 Sqcm and n.exc 25 Sqcm complete all as specified and directed.(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 54 | M&L 2nd class hard wood in scantling clean sawn, timber fixedcomplete all as specified and directed by Eng-in charge . |
| 55 | S&F plywood 6mm thick , ply, grade BWR, type BB, fixed to timber frames with nails complete all as specified and directed by Eng-in charge ..(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 56 | All as per item No 15 above but in ceiling.complete all as specified and directed by Eng-in charge . |
| 57 | M&L for 4mm thick non asbestos fibre cement building boards designer type fixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed in ceiling flat or slopingcomplete all as specified and directed by Eng-in charge ..(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 58 | S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 59 | S&F Hollow PVC Wall Lining consisting of PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site as per specifications and drawing |
| 60 | S&F 5mm thick PVC sheet fillet width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing.(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 61 | S&F5 to 8 mm thick interlocking PVC hollow false ceiling fixed with self tapping screw over and including aluminium hollow SECTION 40MMX40MM and hanging wire of approved colour and design grid with fasteners, supports, Hangers 4mm dia G.I (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I flat 40X3mm size 60mm longplugs to ceiling complete as per manufacturer instructions complete all as specified as per manufacturerer instruction and directed by Engr-in-Charge (Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri)Make:- Placopan,Sintex |
| 62 | Re fixing false ceiling at all heights with exsiting False ceiling2nd class hard wood plain fillets.square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 13 Sqcm and n.exc 25 Sqcm wall wood screws and plywood 6mm thick , ply, grade BWR, type BB, fixed to timber frames with nails . The kwork shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge (Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri). |
| 63 | S&F for PVC (SWR) floor trap 100/75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repairs.(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 64 | Dismantling water tanks & removing to store exc 1000 & n exc 5000 litres (Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 65 | S&FRotational moulded Polyethylene water storage tank - 2000 liters (Triple layer)capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I incl PTMT float valve 25mm dia.The kwork shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge. ( Location Shasitara, Veer Bhadreswar, Shalarchatta,Dharati) |
| 66 | S&FRotational moulded Polyethylene water storage tank - 5000 liters (Triple layer)capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I incl PTMT float valve 25mm dia.The kwork shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge.( Location Shasitara, Veer Bhadreswar, Shalarchatta,Dharati) |
| 67 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc) sheets in roof coveringscomplete all as specified and directed by Eng-in charge . |
| 68 | S&F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site complete all as specified and directed by Eng-in charge .. Note- Fixing of sheet can be done in any shape( round/semicircle etc) |
| 69 | S&F Pre-painted galvalum aluminium zinc coating steel based plain steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in ridges, all as directed at site complete all as specified and directed by Eng-in charge . Note- Fixing of sheet can be done in any shape( round/semicircle etc) |
| 70 | S&F in repair PVC cabinet 450x600mm overall size with looking mirror of selected qality 5mm thick glass mounted over PVC framing as per sample complete all as specified and directed by Eng-in charge . |
| 71 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes coupling and waste pipe; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 510mm x 510mm bowl size 460x460x230mm, complete all as specified and directed by Eng-in charge . |
| 72 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes coupling and waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm |
| 73 | S&F vitreous china rimless single piece WC of Size: 380x700x665 mm, Single Piece WC with PP Soft Seat cover, Hinges, Fixing Accessories, Accessories Set, and Cistern fittings, P /S trap-180mm complete all as specified and directed by Eng-in charge . Make Jaquar cat part No ONS-WHT-10853S300UFSM or equivalent in kohlar, grohe and Roca |
| 74 | S&F in repairs glazed earthen ware viterous china wash down water closet(pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device etc complete all as directed. Make somany Cat Part No. SMART EWC P or Equivelent in Cera/Hindware/Parryware |
| 75 | S&F in repair vitreous china Wash Basin counter Top 600x400x185mm including stainless steel bottle trap and 40 mm dia GI pipe up to Floor trap complete all as specified and directed by Engr-in-Charge Make : Cat Part No SLS-WHT-6601 & ALD-769L250x190 of Jaquar or equivalent in kohlar, grohe and Roca |
| 76 | S&F Repair decorative type WHB Vanity floor mounted made out of coloured PVC board of size 900x600/900 complete all as specified and directed by Eng-in charge .and approved by GE Make: Cat part No. TRIUMPH of Somany or Equivalent in Hindware/Parryware/Cera |
| 77 | S&F in repairs glazed viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm and including CI brackets, outlet of 32 mm bore HDPE outlet pipe with necessary fittings ,32 mm bore brass CP waste couplings and bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed etc ccomplete all as specified and directed by Eng-in charge . |
| 78 | S&F in repair 15 mm bore, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No FLR- 5047 N of Jaquar or equivalent in kohlar, grohe and Roca |
| 79 | S&F in repair 15 mm bore, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No FLR-5053 N of Jaquar or equivalent in kohlar, grohe and Roca |
| 80 | S&F for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed. Make : Prayag or equivalent |
| 81 | S&F in repair Health Faucet (ABS Body) with 1.20 M Long PVC Tube and wall Hook screwed down to GI pipe or union/angle valve complete all as specified and directed by Engr-in-charge Make Jaquar Code No- ALD-CHR-583 or equivalent in kohlar, grohe and Roca |
| 82 | S&F in repair CP, soap dish complete all as specified and as directed by Engr-in-Charge. Make Jaquar Code No- AKP -35731 P or equivalent in kohlar, grohe and Roca |
| 83 | S&F in repair Overhead Shower 200X200mm Square Shape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System including showe arm of size 400x25x25mm sq shape for wall mounted showers with flange, fixing to steel pipe or union complete all as specified Make Jaguar (Cat part No : OHS-1619 & SHA 455L400 or equivalent in kohlar, grohe and Roca |
| 84 | S&F sheet glass corner shelf wall mounted shelf assembly consisting of 5mm thick sheet glass 220mmX220mm size with chromium plated bracket guard and railing 50mm high complete all as specified and directed by Eng-in charge .. Cat Part no CAN -1173 of jaquar or equivenet in Kohlar, grohe and Roca |
| 85 | S&F in repair Towel Rack with Lower Hanger (Stainless Steel) with hook complete all as specified and directed by Eng-in charge . Make Jaguar (Cat Part No: AHS-1581H) or equivalent in kohlar, grohe and Roca |
| 86 | S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges.complete all as specified and directed by Eng-in charge . |
| 87 | S&F in repair for 15 mm bore, fancy type, Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange and including Telephone Shower and shower stand complete all as specified and as directed by Engr-in-Charge Make Jaguar Cat Part No: FLR-5281N, Hand shower HSH 1715, flexible tube SHA-549D12 or equivalent in kohlar, grohe and Roca |
| 88 | S&F in repair 15mm dia brass chromium plated Single Lever Sink Mixer With Swinging Spout on Upper Side (Wall Mounted Model) With Connecting Legs & Wall Flanges for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: FLR-5165 or equivalent in kohlar, grohe and Roca |
| 89 | S&F in repair 15mm dia brass chromium plated Central Hole Basin Mixer single lever tall boy with 150mm extension body fixed spout without popup waste system with 600mm long braided hoses for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: FLR-5005NB or equivalent in kohlar, grohe and Roca |
| 90 | S&F in repair 15mm dia brass chromium plated two way bib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: ARI 39041 or equivalent in kohlar, grohe and Roca |
| 91 | S&F in repairs PVC valve less, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle, including brackets etc complete all as directed. |
| 92 | S&F in repairs 15mm size fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as directed. |
| 93 | Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 94 | M&L for Rendering in 10 mm thick Ready Mix Plaster of Make- ACC’s “ACCOPLAST” / CK Birla’s “AEROCON” / Speed Dry Mix’s “ECO PLASTER” / “MAGIC PLAST” / “BUILDWELL on brick work or concrete surfaces of any description in wall/ceiling etc finished surfaces even and smooth with sogol finish complete all as specifed and directed.(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 95 | M&L for Rendering in 12mm thick Ready Mix Plaster of Make- ACC’s “ACCOPLAST” / CK Birla’s “AEROCON” / Speed Dry Mix’s “ECO PLASTER” / “MAGIC PLAST” / “BUILDWELL on brick work or concrete surfaces etc finished surfaces even and smooth complete all as specifed and directed.(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 96 | M&L for Brickwork with fly ash Old size bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6 etc complete all as specified and directed by Eng-in charge .. (Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 97 | M&L for applying two coats of weather emulsion (APEX or Equivalent, white/red colour or as specified and directed by Engr-in-charge) \\" over two coat of primerincluding preparation of new decorated plastered surfaces of walls/ceiling complete all as specified and directed by Eng-in charge . |
| 98 | M&L for preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer and finally applying two coats of oil emulsion distemper etc complete all as specified and directed by Eng-in charge . |
| 99 | M&L for applying 3mm thick wall putty as directed after washing/rubbing down and stopping of distempered and painted surfaces as in preparatory work to give uniform and smooth finish & preparation of surface. complete all as specified and directed by Eng-in charge . |
| 100 | Taking up or down steel tubing for 15mm dia pipe and connections complete all as spd and directed by Engg-in-Charge (Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 101 | S&F 20mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings. with all fittings; (ISI marked) such as brass elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors including Cutting chases,pinning for concealed water tubing of size 15mm dia and making good to facing where required and pointing in cement mortar 1;3 ,cutting n exc 10cm girth all as specified and as directed by Engineer-in -Charge.(Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 102 | Taking up or down steel tubing for 20mm dia pipe and connections complete all as spd and directed by Engg-in-Charge (Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 103 | Taking up or down steel tubing for 25mm dia pipe and connections complete all as spd and directed by Engg-in-Charge (Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 104 | S&F 25mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings. with all fittings; (ISI marked) such as brass elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete including Cutting chases,pinning for concealed water tubing of size 15mm dia and making good to facing where required and pointing in cement mortar 1;3 ,cutting n exc 10cm girth all as specified and as directed by Engineer-in -Charge. |
| 105 | S&F 25mm dia Supplying and laying of3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 106 | S&F 20mm dia Supplying and laying of3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 107 | S&F 16mm dia Supplying and laying of3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (Location : Shasitara, Shalarchatta, PB, Dharati< Rajouri) |
| 108 | Dismantling existing unservicable floor/wall tiles of any description including bedding/screed layer complete all as specified and directed by Eng-in charge Notes:-Demolished material should be thrown out of the defence line including loading,transportation,unloading of debris at govt approved dumping area.Also no extra cost shall be paid to the contractor by department. |
| 109 | M&L for Cement concrete chequered tiles 30cm x 30xm x22mm thick, machine pressed; set, jointed and pointed in net cement slurry in floors, and cut and polished with grey cement and no pigment, laid over 20 mm thick bedding layer of cement mortar 1:4 all as specified and directed by Eng-in charge |
| 110 | Dismantling existing unservicable floor tile of any description including bedding/screed layer and M&L for colored non skid ceramic tiles 7to 8 mm thick, area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles at site.complete all as specified and directed by Eng-in charge |
| 111 | Dismantling existing unservicable wall tile of any description including bedding/screed layer and M&L for 300x450 x7 mm thick, of any design pattern as approved by GE/AGE, glazed ceramic tiles colored as in dado/ skirting and vertical surfaces set&jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles.complete all as specified and directed by Eng-in charge |
| 112 | Dismantling existing unservicable wall tile of any description including bedding/screed layer and M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) as in cooking plateforms, counter type WHB and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust admixture of pigment to match with shade of granite & moulding the edges complete all as specified and directed by Eng-in charge Note:- the work should be executed in patch work. |
| 113 | S&F Kitchen plate rack, including shelves, made of stainless steel not less than 1mm thick with fixing acessories, overall size 750 mm x 600mm x 250 mm, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. Make Bluestar,prayag ,Nirali or any equivalent as in approved makes |
| 114 | SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender