Tender For Special Repairs To Central Ac Plant Of Dbm 12 And 13 At Nad Karanja
Tender Value
1.68 Crore
Estimated cost
Bid Submission
05 Aug 2026
26 days left
EMD
2.42 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Central Ac Plant Of Dbm 12 And 13 At Nad Karanja
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE KARANJA NAME OF WORK : SPECIAL REPAIRS TO CENTRAL AC PLANT OF DBM 12 AND 13 AT NAD KARANJA CONTRACT AGREEMENT: CWE KJ(K) - OF 2026-2027 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Complete removal of existing water proofing treatment of any description and in any position including PCC padding any thickness and cleaning, wire brushing, watering & removal of debris outside MODNote :- 1. Taking down earthing strips incl insulators from roof for treatment and re-fixing of same with existing specification in the same |position after laid APP membrance including replacement of broken| |insulators, PVC rawl plus & screws etc are deemed to be inclusive of rate quoted by the contractor.2. Unit rate quoted shall also include for removal of PVC water storage| |tank wherever existing carefully and refixing at the same or otherl position after completion of roof repair work. |
| 3 | Material and Labour Cutting out cracks to V-section in existing roofs or terracing, |cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) |
| 4 | Roughening surfaces Of old concrete floors by picking, sweeping clean |and washing down with waters to remove dusts etc. complete all as specified |
| 5 | Brushing neat cement slurry with 3kg/sqm all as specified |
| 6 | Material and Labour PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in |concrete padding laid to required slope incl finishing the concrete surface fair and even without using extra cement complete all as specified and as directed. |
| 7 | |Material and Labour for 10 mm thick screed bed or bedding layer of mortar in cement| mortar (1:4) for laying roof finish as padding finished with WPC 3% by |weight of total cement, complete all as specified and directed NOTE :- Integral WPC shall be measured and paid separately |
| 8 | Apply oil bound bitumen primer @ 0.40 Litre / Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg / Litre at 25 |degree Celsius on the prepared dry roof surface. |
| 9 | Material and Labour APP based polymeric membrane min weighting 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric(wt not less than 150 gms/sqm laid on primed surfaces by forced application method all as specified. |
| 10 | Material and Labour for preparation of new surfaces of any description not otherwise described over 10cm width or girth and applying two coats of solar reflective aluminium paint @ 0.10 kg/sqm membrane surfaces. |
| 11 | Supply only liquid water proofing compound as pedicrete URP mix with cement concrete/ cement plaster as per manufacture instruction all as directed by Engr-in-Charge. Make : DR. FIXIT PIDE PROOF LW, FOSROC |
| 12 | Taking down roling shutters exc 4 sq. m but n exc 7 sqm each including guide bars all as specified and as directed |
| 13 | Supply and fix Steel rolling shutters, 1.00 mm thickness of lath with out ball Sqm bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated complete: push pull or manual type |
| 14 | Material and Labour Preparation of new previously untreated steel and iron surfaces of any description not other wise described over 10 centimetre width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed |
| 15 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Square Metre each, removing from the site including cutting holes required for taking out existing hold fast etc, complete all as specified and as directed. |
| 16 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 sqm not exceeding 4.0 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed. |
| 17 | Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete as specified by the manufacturer and as per directions of Engineer-in-charge |
| 18 | Supply and Fix factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 19 | Supply and fix solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and as directed by Engineer - in -Charge |
| 20 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed by Engineer - in -Charge |
| 21 | Supply and fix stainless steel dash fasteners of 8 mm dia and 75 mm long bolt for fixing item no. 16.00 above complete all as specified and as directed by Engineer - in -Charge |
| 22 | Supply and fix 100 mm long stainless steel Butt hinges. |
| 23 | Supply and fix 150 mm long Extruded aluminium alloy handles, fabricated type. |
| 24 | Supply and fix 200 mm long Aluminium anodised, barrel tower bolts of ex truded section and fixed. |
| 25 | Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 26 | Supply and fix Anodised aluminium grill(anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 27 | Supply and fix Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 28 | Supply and fix Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 29 | Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple. |
| 30 | Supply and fix 4mm thick sheet glass ordinary quality black glass colour, white, frosted or multicolour fixed in aluminium window/Door/Partition including rubber beading in square area n exc 0.5 Sqm in each panel complete all as specified and as directed by Engineer-in-Charge. |
| 31 | Supply and fix 4mm thick sheet glass ordinary quality black glass colour, white, frosted or multicolour fixed in aluminium window/Door/Partition including rubber beading in square area exc 0.5 Sqm in each panel complete all as specified and as directed by Engineer-in-Charge. |
| 32 | Chipping , removing carefully concrete work by low impact hammer breaker without damaging the structure & cleaning and disposal of debries out side the premises etc. complete as directed by Engr-in-Charge. Hard concrete should not be removed by force. |
| 33 | Material and Labour for Clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete and applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem or Roff rust cleaner of Piddilite or Dr. Fixit Rust removal or Shali Rust of STP Ltd. on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry. |
| 34 | Material and Labour for applying two coats of Epoxy based Zinc primer in a span of four hours over the treated rebars and allow to dry for six hours. The application shall be by brush. Epoxy primer for steel of make / brand - Corroseal-ZR of Krishna Conchem or Dr. Fixit Epoxy zinc primer. |
| 35 | Material and Labour for cleaning all loose laitance on the concrete substrate and applying one coat of epoxy bonding agent on exposed concrete surface to ensure bond between old concrete & new concrete by brush application. Make / brand Monobond SBR of Krishna Conchem or Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd. |
| 36 | Material and Labour for Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 = 1 monobond-5Cement-15 sand) -in damaged areas in 30mm thickness including leveling profliling etc complete. |
| 37 | Material and Labour for applying concrete protection coating on finished structural members exposed to atmosphere make or brand IPNET of Krishna Conchem or New Coat from Dr. Fixit. |
| 38 | Material and Labour for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes. Works shall be carried out as under :-(i) Cleaning of holes. Clean the holes by air blower prior to fixing nozzles. (i! Fixing of nozzles. Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun.Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (ii) Cutting of nozzles. Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2mm wide fix the injection nozzels directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzels in these holes with fast-setting epoxy putty & let it dry for 2 to 3 days. Also, seal the crack between the ports with epoxy putty. (v) In case where the crack is wider than 2mm upto 4 to 5mm, drill holes at the sides of the crack in a staggered fashion, at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also, seal the face of the crack with a liberal application of the epoxy putty. |
| 39 | Material and Labour for Injecting of site mixed cement slurry grout, mixed in specified proportion containing cement, sand water with addition of plasticizers (approved make) & migratory corrosion inhibitors, water cement ratio shall be varied between 0.5 to 1.0 for each hole, shrinkage compensating cement slurry mixed to a lump free fresh creamy consistency ,Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filing of grout in the holes drilled. Make / brand of Epoxy grout Dr. Fixit Epoxy injection or EPCO KP-HP-250 of M/s Krishna Conchem or Shaligrout El of STP Ltd |
| 40 | Material and Labour for Injecting low viscosity (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till refuses to accept the grout, Including, Mixing of nozzles materials: Mixing of material components(part a & b) in the required quantities as per manufacturer's instruction by weigh batching. Grouting: Fill the grouting gun with concrete penetrating corrosion inhibitor EPCO-KP-100/Protectsil CIT or Ferogard 903 Maintain desired pressure in the gun by air compressor; maintain the pressure at exit(2 to 3kg/cm2) by monitoring pressure guage at exit. Grout the material through prefixed nozzles in the structural elements@ 100ml per nozzle. Repeat the process for all the nozzles. |
| 41 | Material and Labour Mild TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed by Engr-in-Charge Note:-Replacement of steel reinforcement with TMT bars of appropriate size where 30% of cross section is reduced including dismantling of rusted steel complete all as specified and directed. |
| 42 | Material and Labour for Mild Steel sheet TMT bar of 5mm and over upto 10mm dia in or stirrups, spacers and binded of designed diameter in various structural elements like column , beams and foundations including drilling , bending welding and fixing the bars with epoxy putty etc. complete (Steel provided on the basis of 1% of volume of concrete) |
| 43 | Material and Labour for Providing and applying jacketing around columns with Micro concrete (Molith-MC) M40 including allifts, shuttering, drilling holes and fixing shear anchor as per specification complete. Note: Reinforcement shall bpe measured and paid separately. (Rates including jacketing formwork and micro concrete). |
| 44 | Supply and fix in repair to 500 ltrs capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in IS Code -12701-1996 including 25mm dia water tank nipple complete all as specified and directed. |
| 45 | Supply and fix of gun mental, globe or gate valves 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed. |
| 46 | Supply and fix 25 mm PVC float valve high pressure of PTMT with epoxy coated aluminium rod & hight density plastic ball complete screwed for iron pipe or brass furred and fixed with fittings such as (socket, nipple, union) etc Make : Prayag. |
| 47 | Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed. |
| 48 | Taking up or down steel tubing and connections 25 mm bore complete all as specified and directed. |
| 49 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings. heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 50 | Supply and fix CPVC water tubing outer dia 20mm bore pipe, SDR 11 including provision of all fittings and connected completed in concealed and surface, along with primer R slovent cement for joint as per ASTM D 2564, pipe material shall be as per ASTM D 1785, fitting/ flanges shall be as per ASTM D2467, all as specified and directed by Engr-in-charge. |
| 51 | Supply and fix CPVC water tubing outer dia 25mm bore pipe, SDR 11 including provision of all fittings and connected completed in concealed and surface along with primer & slovent cement for joint as per ASTM D 2564, pipe material shall be as per ASTM D1785, fitting/ flanges shall be as per ASTM D2467 all as specified and directed by Engr-in-charge. |
| 52 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing Or concealed conduit wiring, etc., and making good, cutting not Material and Labour PVC (SWR) floor trap plain with grating incl jointing with solvent exc 10cm girth. |
| 53 | Material and Labour PVC (SWR) floor trap plain with grating incl jointing with solvent cement 75mm bore complete all as specified and directed. |
| 54 | Supply and fix for 5.5 mm thick and 120mm wide sheet glass shelf assembly with chromium plated bracket guard and railing 500mm long as in repair complete all as specified and as directed. |
| 55 | Supply and fix 15mm bore Two bib taps screwed down high pressure with both ends for iron pipe 15mm bore fancy type chromium plated as complete Make Cera/Jaguar/Hindware. |
| 56 | Supply and fix in repair 15 mm bore Pillar tap in repair ast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with long screws shanks and nut complete. Make Cera/Jaguar/Hindware. |
| 57 | Supply and fix in repair 15mm bore stop cock or angle valve cast copper alloy chromium plated fancy type, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe. Make Cera/Jaguar/Hindware. |
| 58 | Supply and fix in repair PVC connection 15mm size with PTMT nuts of length 450mm. |
| 59 | Supply and fix in repair for designer bevelled edge looking mirror of selected quality glass of 6mm thick having four holes on corners fixed to walls with CP Brass screws with fancy type head top complete all as specified and directed by Engr-in-Charge. |
| 60 | Supply and fixing in repair PVC flushing cistern of 10 Itrs capacity including flush pipe PVC connection etc complete all as specified and directed. |
| 61 | Supply and fixing in repair white vitreous china wash down water closet pan (Pedestal pattern) with and including P or S trap, including plastic seat cover closed pattern, fixing bolt etc complete all as specified and directed. |
| 62 | Supply and fix in repair Vitreous china wash basin white , flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe. |
| 63 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 64 | Demolition of Brickwork or stone/ boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding asphalt facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 65 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge. |
| 66 | Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified. |
| 67 | Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed. |
| 68 | Material and Labour for 40 mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in Sub floors sub bases , floors and paving etc Complete all as specified and directed by Engr-in-charge. |
| 69 | Material and Labour for 100 mm thick Cement concrete type B-1,1:2:4 (40mm graded aggregate) as in flooring, finishing cement concretesurface even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 70 | Material and Labour plain cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed. |
| 71 | Material and Labour for glazed ceramic coloured difital tiles of size 300x600x7mm Size as in walls set and jointed in neat cement slurry over 10mm thick recuing in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface etc all as specified and as directed by Engr- in-Charge. Note:- Desinger concept tiles matching with existing tiles. |
| 72 | Material and Labour non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors over screed bed or bedding layer of mortar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed. |
| 73 | Material and Labour non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in skirting/dado over 10 mm thick cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed. |
| 74 | Material and Labour for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade y including 20mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as specified and directed. |
| 75 | Material and Labour for Providing edge moulding to 18-20mm thick granite/ marble stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed. |
| 76 | Material and Labour for pre-cast cement concrete block masonry with solid blocks in 10cm in width in type B1 1:2:4 (20mm graded aggregate) and setting in mortar (1:6) complete all as specified and as directed. |
| 77 | Material and Labour for rendering 15mm thick on fair faces of Sqm brick/concrete surfaces in CM (1:4), finished even and smooth without using extra cement (WPC to be measured and paid separately) complete all as specified and directed. |
| 78 | Material and Labour for rendering 10 mm thick on fair faces of Sqm brick work or concrete surfaces of walls in cement mortar 1:6 finished even and smooth (with out using extra cement) complete all as specified. |
| 79 | Material and Labour for rendering 5 mm thick on ceilings in Sqm cement mortar 1:3 and finishing the surface even and smooth without using extra cement complete all as specified. |
| 80 | Material and Labour three coats of white wash on newly plastered surfaces of ceilings Sqm including preparation of surface complete |
| 81 | M & L for preparation of new or previously untreated plastered surfaces Sqm of walls and applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern on one coat of primer complete all as specified and as directed. |
| 82 | Material and Labour applying 1mm thick wall are putty on new or old plastered surface Sqm and prepare the smooth surface with sand paper and applying two coats of oil bound distemper on walls complete all as specified and as directed by Engineer-in-Charge. |
| 83 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 84 | Material and Labour PCC 1:4:8 type D-2 40mm graded stone aggregate in foundation filling and mass concrete etc as specified and directed. |
| 85 | Supply and fix towel rail 600mm long of stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats all as specified and directed by Engr-in-Charge Make:- Nixo/ Jaguar cat part No Cat Part No CAN-CHR-11 11SM or equivalent our of makes specified and directed by Engr-in-Charge. |
| 86 | Supply and fix 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid on wall or in trenches or in floors all as specified and directed. |
| 87 | Supply and fix 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid on wall or in trenches or in floors all as specified and directed. |
| 88 | Supply and fix PVC (SWR) bends ISI marked any radius of 110 mm bore complete all as specified and directed. Make : Finolex/ Kisan/ Supreme/Prince. |
| 89 | Supply and fix PVC (SWR) bends ISI marked any radius of 75 mm bore complete all as specified and directed. Make : Finolex/ Kisan/ Supreme/Prince. |
| 90 | Supply and fix PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe with access door complete all as specified and directed Make : Finolex/ Kisan/ Supreme/ Prince. |
| 91 | Material and Labour for complete preparing old plastered surfaces of walls and applying one coats of oil bound distemper on plastered surfaces complete all as specified and directed. |
| 92 | Material and Labour for preparation of old plastered surfaces of walls and applying one coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern complete all as specified and as directed. |
| 93 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft loose soil. |
| 94 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar. |
| 95 | Returning, filing in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 96 | Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for |
| 97 | Material and Labour for PCC 1:4 :8 type D2 (using 40 mm graded aggregate) Concrete bed to drain pipes of 150 mm dia including packing under, and hunching against the sides of pipes after they are laid and tested. |
| 98 | Material and Labour for 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars. |
| 99 | Taking down carefully copper /aluminum point wiring ( light,fan,socket or power) complete, with wiring acessories such as bend boards Elbows only, ceiling fittings etc and removing material to store for safe coustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified. |
| 100 | Point wiring with single core 1100 volts grade 1.5 sqmm size FRLSH PVC insulated unsheathed stranded copper conductor cable using color code drawn through conceiled conduit in brick/stone wall & including PVC conduit with all accessories Complete all as specified in and including 1.5Sq mm FRLSH PVC insulated unsheathed copper conductor cable for continous earth conductor (using green colour)to commen earth and connecting to earth dolly for the following:(a) One light / Buzzer point controlled by one switch 5 Amp, SP, one way 240 volts.Note :- (I)Necessary cutting and chasing of wall surafce including making good surface deemed to be included in quoted rates.(II) Modular white cover plate with frame & modular metal flush box measured and paid separately of respective items in schedule. |
| 101 | (b) One fan/exhaust fan point controlled by one switch |
| 102 | (c) One 5 pin socket outlet 5 Amps on same board |
| 103 | (d) One 5 pin socket outlet 5 Amps on independent board |
| 104 | All as per item No 99 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with FRLSH PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board. |
| 105 | Supply and fix switch modular single pole one way, 6 Amp (ISI marked) all as complete all as specified and directed by Engineer-in-Charge |
| 106 | Supply and fix modular bell push flush type 6 Amp (ISI marked) all as specified and directed Engineer-in-Charge. |
| 107 | Supply and fix modular socket outlet 15 Amp, 5-in-1, controlled by one switch (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 108 | Supply and fix switch modular single pole one way,16 Amp (ISI marked) all as complete all as specified and directed by Engineer-in-Charge |
| 109 | Supply and fix modular socket 2 in 1, 3 pin, 6 Amp flush type (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 110 | Supply and fix modular fan 5 step regulator for ceiling fan complete all as specified and directed by Engineer-in-Charge. |
| 111 | Supply and fix modular ding dong door bell electric suitable for AC 230 volt, single pole complete a all as specified and directed by Engineer-in-Charge. |
| 112 | Supply and fix modular ceiling rose, 3 phase/PVC/polycarbonate, isolated body, three terminals complete all as specified and directed. |
| 113 | Supply and fix modular dummy type switch cover 1 module complete all as specified and directed. |
| 114 | Supply and fix modular white cover plate with frame 1/2 module all as specified and directed |
| 115 | Supply and fix modular white cover plate with frame 3 module all as specified and directed |
| 116 | Supply and fix modular white cover plate with frame 4 module all as specified and directed |
| 117 | Supply and fix modular white cover plate with frame 6 module all as specified and directed |
| 118 | Supply and fix modular white cover plate with frame 8 module all as specified and directed |
| 119 | Supply and fix modular white cover plate with frame 12 module all as specified and directed |
| 120 | Supply and fix modular MODULAR METAL FLUSH BOX with frame 1/2 module all as specified and directed |
| 121 | Supply and fix modular MODULAR METAL FLUSH BOX 3 module all as specified and directed |
| 122 | Supply and fix modular MODULAR METAL FLUSH BOX 4 module all as specified and directed |
| 123 | Supply and fix modular MODULAR METAL FLUSH BOX 6 module all as specified and directed |
| 124 | Supply and fix Modular MODULAR METAL FLUSH BOX 8 module all as specified and directed |
| 125 | Supply and fix modular MODULAR METAL FLUSH BOX 12 module all as specified and directed |
| 126 | Supply and fix LED batten with 20/22W LED tube light (4\\") , 220V,AC ,50Hz in wall/surface connecting with all required accessories like PVC box base,flexible cable from ceiling rose etc,suge protection, high power factor, Surface and wall mounted LED batten, Engineering plastic batten with accessories complete all as directed and specified by engr-in-charge. |
| 127 | Supply and fix LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 128 | Supply and fix double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 8 way double door open able, including taking out old unsv MCB DB any size/type. |
| 129 | Supply and fix double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 4 way ,including taking out old unsv MCB DB any size/type. |
| 130 | Supply and fix replacement MCB SP 240 V, 50 Hz, 10 KA conforming to IS 8828 of rating 5 to 32 Amp, 'C' series complete all as specified and directed by Engineer-in-Charge. |
| 131 | Supply and fix MCB double pole RCBO 240 volts AC 40 Amps (C-series) OF 100MA all as specified and directed by engr-in-charge |
| 132 | Supply and fix in repair/replacement SPN 32 AMP MCB DP 240 V 10 KA (C-Series) complete all as specified and directed. |
| 133 | Material and Labour for wiring for circuits/sub main wiring with FRLSH PVC insulate sheathed 2 x 6 sqmm stranded copper conductor cable 1100 volts grade heavy duty drawn into new concealed PVC conduit with 6 sqmm FRLSH PVC insulated green copper cable for continues earth with suitable dia of PVC pipe with all accessories complete all as specified and directed by Engr-in-Charge. |
| 134 | Supply and fix exhaust fan of sweep size 300mm ,220V,50 Hz all specified and directed in charge. |
| 135 | Supply and fix ceiling fans 1200mm sweep size ,bldc type ,220V,AC,50 Hz all specified and directed in charge. |
| 136 | Supply and fixing LED building security light fitting with suitable size bracket/angle to fit security light of 45w IP 66 protection LED complete all as specified and directed by Engr-in-charge. |
| 137 | Supply & fixing, jointing, connecting & testing in trenches XLPE/PVC insulated PVC sheathed cable heavy duty 2 core 10 Sqmm ,1100 volts grade, aluminum conductor in trenches / ducts/ of the including taking out cable cover & cable all as specified and directed . |
| 138 | Material and Labour for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised iron strip 32X6 mm dia by means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion. Note : The unit rate includes for protection pipe and lead wire from top of earth plate up to 7.5 meter above ground level. |
| 139 | Supply & fixing in repairs/replacement air termination single pointed aluminium rod 12 mm dia and 300 mm long with necessary fixing arrangement on blocks on roof, all as specified and directed |
| 140 | Supply and fix aluminium strip of size 25 x 3.15 mm fixed with suitable saddleSupply and fixixing screw etc on roof with rubber & bitumen washer & fixed to insulator on wall for down conductor as fixed in repairs, complete all as specified and directed |
| 141 | Supply and fix test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm thick drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws fixed to GI strip bracket fixed to porcelain insulator in wall as in repairs, complete all as specified and directed Note :- Porcelain insulator will be measured & paid for separetly. |
| 142 | Supply and fix vitreous china porcelain insulator with busbar support white type, complete all as specified and directed |
| 143 | Supply and fix 40 mm dia GI pipe medium grade for post not exceeding 3 mtrs in length truly vertical position embbed in PCC including n.exc and earth work as in repairs, complete all as specified and directed. Note : PCC of of pole embeded will be measured and paid separately under relevant items of Sch. |
| 144 | Material and Labour PCC (1:2: 4) type BO, using (12.5 mm graded stone aggregate) of blocks size and IE rules including necessary use and waste of form work as in grounting of porcelain insulator, all as specified and directed |
| 145 | Material and Labour for PCC (1:2:4) type B1, using (20 mm graded stone aggretgate) for earth chambers as in repairs, coping for GI pipe post including necessary form work, excavation in soft loose soil, returning in filling and removing surplus soil to a distance n. exc 50 mtr and deposing where directed. |
| 146 | Supply and fixix in repair GI strip 32mm x 6 mm burried in ground for loop earthing and ground grid including excavation and earth work in any type of soil complete all as specified and directed |
| 147 | Dismantling the existing DX Type central AC plant 78 TR (3 x 39 TR) capacity complete set at DBM 12-13 workshop AC plant alongwith the following machineries and assessaries:-(a) compressor(03 Nos) (b) condenser(03 Nos),(c) compressor motor(03 Nos),(d) condensor pump motor(02 Nos), (f) AHUs (02 Nos),(g) FRP cooling tower (01 Nos),(h) connected all ducting , (j) steel support of AHU ducting (approx 75 KG), (k) Main Control Panel board (01 Nos),(i) AHU control panel board (01 Nos) (m) All connected sizes of LT cable approx (50 RM) (n) all connected GI pipe line (approx 50 RM), (o) Connected valve (20 Nos), (p) connected pressure gauge (20 Nos) and foundation of compressors, motors, cooling tower,complete all as specified and direted. Note:- Old dismantled plant with all equipments and accessory complete shall be deposited to AGE E/M-II store yard. |
| 148 | CENTRAL AIR CONDITIONING SYSTEM Supply, Install, testing, balancing and commissioning of central air-conditioning plant as per scope of work given in the following items and sub items of work to maintain design temperature of 22 ± 2°C and humidity of 55 ± 5% at the given building and based on other conditions as given in the User Data sheet and all as required as per the standard code of practice in the given field. Care has been taken to include all items as per below given detail however in case any item of work civil or electrical or mechanical not specifically specified but essentially required for successful and efficient completion and commissioning of air conditioning system shall be procured and fitted in the system to achieve the targeted and optimum performance, the cost of which is deemed included in the quoted tender rates against each item and as a whole of the system. |
| 149 | WATER-COOLED INVERTER SCROLL TYPE CHILLER UNIT (2w+ 1S) Supply, installation, testing and commissioning of factory designed, pre-fabricated and floor-mounted hermetically sealed Inverter scroll type water cooled chiller machine of at least 39 TR nominal capacity and complete with scroll compressors having independent refrigerant circuits & automatic stepless capacity control, water-cooled type condenser, horizontal flooded type evaporator with MS shell and seamless copper tubes with elastomeric insulation, suitable numbers of herrmatically sealed Inverter compressor/s, lubrication system as per manufacturer's design required for smooth and trouble-free operation of the chiller package, common base frame, interconnected copper refrigerant piping along with elastomeric insulation, fittings, valves, expansion valves and accessories to interconnect compressor, condenser, chiller and expansion valve, microprocessor based control panel comprising of controls including sensors and equipped with a keyboard, LCD touchscreen min 7\\" access input system, protection and monitoring devices to perform control functions, wiring, vibration isolators, gauge panel, automatic safety controls, flow switch at evaporator and condenser and ozone friendly, CFC-free refrigerant R- 410A/R407A all complete as specified and directed by the engineer-in-charge and accessories complete to maintain inside condition as under :first charging of lubricating oil and refrigerant etc of minimum capacity 39 TR. |
| 150 | Temp - 22 ± 2°CRH - 55 ± 5 % Air changes - 2.0/HourOperational period 24 Hrs and comprising of the following :- (a) Restrained Spring Isolators Vibration Isolator Of Approved Make and specifications - Spring elements shall have a lateral stiffness greater than 1.2 times the rated vertical stiffness and shall be designed to provide a minimum of 50% overload capacity. Non-welded spring elements shall be polyester powder coated, and shall have a 1000 hr rating when tested in accordance with ASTM B-117. Springs shall be deflections as per operating load design of equipment.(b) Single Arch Rubber Bellow for Chillers as per requirement complete with Control Guide Assembly(c) Initial / first charge of refrigerant gas & compressor (d) Necessary civil work viz. foundation for placement of chillers, etc. shall be deemed to be included in the scope of work. The scope of work. The chiller shall conform to the following requirements / specifications:[i] Chilled water inlet/outlet temperature: 12/7 ˚C[ii] Evaporator fouling factor: 0.000018 ⁰Fft²hr/Btu[iii] Condenser water inlet/outlet temperature: 32/37 ˚C[iv] Condenser fouling factor: 0.000044 ⁰Fft²hr/Btu[v] Refrigerant (Ozone friendly type): R410A/R407C[vi] Test standard: In Accordance with ISEERNOTES:[i] Mapping shall be required for all critical points displayed on the chiller control panel. The chiller shall be BMS compatible and shall have RS485 / RS232 serial communication protocol.[ii] The unit shall be suitable for 3- Phase, 415 V ± 10%, 50 Hz AC electric supply,with a built-in microprocessor based control panel. |
| 151 | CHILLER PLANT MANAGERSupply, installation, testing and commissioning of Chiller Plant Optimizer (CPO), controlled by IP based (UL listed) Chiller Plant Controller (CPC) unit(s) having a library of factory designed and tested algorithms to operate, supervise and improve operational efficiency of the individual Product Integrated Controller (PIC) for each chiller, allowing dynamic interaction between the supervisory software, towers, pumps, and the chiller PIC(s) to create a complete Chilled Water Plant System complete including software programming and related calibration all as specified and directed by the Engr-in-Charge. |
| 152 | The CPO shall conform to the following technical specification / functional requirements.[i] The CPO software shall have a Perpetual Software License and shall not be subscription based. It shall be given to the Owner at the time of handover.[ii] The CPO software shall provide a web-based platform for monitoring, controlling, and optimizing HVAC systems. It must support BACnet/IP communication, offer real-time data visualization, and allow remote access via any standard browser. The software should facilitate easy integration with existing building management systems, support data logging, and provide customizable alarms and reports. It should also enable scheduling, trend analysis, and system diagnostics without the need for additional software installations. It should support unlimited users login support.[iii] The CPO software should allow (1) Scheduling reports to run during specific date periods and run frequencies.(2) Specifying file storage options for scheduled reports.(3) The owner shall have the ability to install software on a minimum of five additional owner furnished computers without additional licenses or fees.(4) Exporting reports to save to your PC as CSV, HTML, or PDF files.(5) Editing scheduled reports.(6) System shall allow an unlimited number of concurrent users and unlimitted points.[iv] The CPO software should allow users to receive, view, acknowledge and make comments on building alarms and events. It should automatically generate system-created data logs (for equipment and standard applications) on a 15-minute interval and then stores that data for seven days.[v] The CPO software should be capable of creating, editing, and deleting schedules, creating, editing, and deleting calendars & exception schedules and viewing all effective schedules in a facility. It should allow temporary overrides; permanent overrides, etc.[vi] The CPO software shall have a built-in, on primases FDD and cloud connectivity features for data analytics. The web server application shall support Transport Layer Security (TLS) 1.3 capable of encryption of up to 256-bit elliptical curve for transmitting private information over the Internet using HTTPS. Additionally, the web server shall have SHA-2 certificate support capability.[vii] Web server and controllers shall communicate using BACnet protocol. Communication between the web server and client (workstation) shall be HTTP or HTTPS protocol utilizing HTML5 language. |
| 153 | [viii] The control system shall consist of a high-speed, peer-to-peer network of DDC controllers, a control system server, and a web-based operator interface.[ix] The Operator Interface (web server with client devices) shall conform to the BACnet Operator Workstation (B-OWS) or BACnet Advanced Workstation (B-AWS) device profile as specified in ASHRAE/ANSI 135 BACnet Annex L.[x] Building Controllers (BCs): Each BC shall conform to BACnet Building Controller (B-BC) device profile as specified in ANSI/ASHRAE 135, BACnet Annex L and shall be listed as a certified B-BC in the BACnet Testing Laboratories (BTL) Product Listing.[xi] Advanced Application Controllers (AACs): Each AAC shall conform to BACnet Advanced Application Controller (B-AAC) device profile as specified in ANSI/ASHRAE 135, BACnet Annex L and shall be listed as a certified B-AAC in the BACnet Testing Laboratories (BTL) Product Listing.[xii] Application Specific Controllers (ASCs): Each ASC shall conform to BACnet Application Specific Controller (B-ASC) device profile as specified in ANSI/ASHRAE 135, BACnet Annex L and shall be listed as a certified B-ASC in the BACnet Testing Laboratories (BTL) Product Listing.[xiii] Encrypted Security Data. Store system security data including operator passwords in an encrypted format. System shall not display operator passwords.[ixv] Database: System shall support any JDBC (Java DataBase Connectivity) compliant engine. This includes: MS SQL, My SQL, Apache Derby, PostgreSQL and Oracle.NOTES:[i] The make of Chiller Plant Optimizer (CPO) shall be as per the chiller OEM recommendation.[ii] All microprocessor should be BTL listed & UL certified. [iii] The chiller plant manager shall work on BACnet/IP protocol. [iv] The workstation shall be of latest specification at the time of execution. |
| 154 | ANTI-FOULING CONDENSER SYSTEM (AFCS)Supply, installation, testing and commissioning of chemical-free intelligent Anti-Fouling Condenser System (AFCS) having continuous descaling mechanism at 10 minutes interval (customizable as per operational requirement), inline ball trap suited for high pressure rating as applicable in hydraulic equipment with leak-proof raised face flange gasket, rust-free fastener and SS-304 mesh, touch panel HMI (human machine interfaces) with high resolution touch display, PLC controller having BMS connectivity and Ethernet, single module with interchangeable relay card and other features viz., motorized valves / solenoid valves, pressure booster pumps as required, high quality sponge balls, energy meter, flowmeter, sensors, common skid piping, etc. suitable for automatic condenser cleaning up to four chiller with a common skid for the required number of chillers in the Plant Room complete all as specified and directed by the Engr-in-Charge NOTES:[i] The AFCS shall be compatible to be operated through the Chiller Plant Manager. |
| 155 | CHILLED WATER CIRCULATION PUMP (2W + 1S) THERMALLY INSULATEDSupply, Installation, Testing and Commissioning of Monoblock type, IE-3 motor rating, Cast Iron casing & bronze Impeller & Shaft seals with TEFC motor suitable for 3 Phase, 415 V + 10 %, 50 c/s, AC Power supply, Necessary Cabling & Earthing Strip, mounted on common base frame etc. The pump shall be duly insulated, as per specifications. NOTES: [i] Necessary civil work viz. foundation for placement of pump and pump accessories shall be covered in the scope of work. [ii] Single Arch rubber bellow for pumps shall be provided as required as as per standard specification. Water Flow Capacity - 65 GPM, Static Head - 30m, Impeller - Bronze.[iII] The contractor shall verify pump head before placing the purchase order of pumps.[iv] The pump assembly shall be suitable for speed regulation through VFD / VSD drive.[v] Necessary civil work viz. foundation for placement of pump and accessories shall be covered in the scope of work. [vi] Pressure gauges, thermometers and drains shall be measured and paid for separately. |
| 156 | COOLING TOWER: FRP INDUCED DRAUGHT COOLING TOWER -Supply, installation, testing and commissioning of CTI certified, factory assembled, industrial duty, induced draft, counter-flow type, film-fill FRP cooling tower suitable to cool 500 USGPM water from 36 ºC to 32 ºC (∆T 4 ºC) at entering wet bulb temperature 27.5 °C , 90 TR actual heat rejection] having uniform water distribution and optimal heat transfer having casing of at least 3 mm thick UV stabilised fiberglass reinforced plastic (FRP) panels, laminated to each other providing a watertight seal, with HDG steel support structure of sufficient structural strength to withstand vibrations and wind velocity up to 50 m/s, 5 mm FRP fan deck acting as mechanical access platform, FRP hot water basin for water distribution with gravity-fed nozzles and a splash box for each hot water basin, open ended connection(s) for inlet to cooling tower, cross corrugated film type thermoformed PVC counter flow fill suitable for entering water temperatures up to 55 °C (supply water from chiller should not reach temperature exceeding 52 °C), thermoformed UV resistant polypropylene cellular drift eliminators having drift losses ≤ 0.005% of the water flow rate, propeller type gear-driven fan incorporating wide-chord geometry and having FRP blades and aluminium / HDG steel hubs, energy efficient (IE4) TEFC squirrel cage induction motor(s) to be installed outside moist air stream, conforming to IS 12615: 2018, with class 'F' insulation complete with accessories all as specified and directed by the Engr-in-Charge.NOTES:[i] Necessary civil work viz. foundation, supporting structure, etc. for placement of cooling tower shall be deemed included in the scope of work. [ii] The fan motor shall be suitable for 3- Phase, 415 V ± 10%, 50 Hz AC supply. |
| 157 | CONDENSER WATER PUMP (2W + 1S)Supply, installation, testing and commissioning of Mono block, cast iron casing, enclosed type dynamically balanced bronze impeller, carbon steel pump shaft, gland packed sealing, deep groove ball bearings, etc. with TEFC squirrel cage induction motor having class 'B' insulation, IE3 efficiency, conforming to IS 12615: 2018 and suitable for operation on 3-Ph, 415 V±10%, 50 Hz AC supply, base plate, mounting channel frame, accessories and fittings, viz. pressure gauges, thermometers, drains, coupling, coupling guard, vibration isolation arrangement by means of spring / rubber type mounting complete all as specified and directed by Engr-in-Charge. NOTES: [i] Necessary civil work viz. foundation for placement of pump and pump accessories shall be covered in the scope of work. [ii] Single Arch rubber bellow for pumps shall be provided as required as as per standard specification. Water Flow Capacity - 150 GPM, Static Head - 20 m, Impeller - Bronze. [iii] The contractor shall verify pump head before placing the purchase order of pumps. [iv] Necessary civil work viz. foundation for placement of pump and accessories shall be covered in the scope of work. [v] Pressure gauges, thermometers and drains shall be measured and paid for separately. |
| 158 | AIR HANDLING UNIT - 02 NosSupply, installation, testing and commissioning of double-skin type horizontal, floor-mounted, top / side discharge air handling unit of the following capacity at 40/50 mm static pressure, Hollow profile, with air-tight casing using gaskets and self-adhesive tapes all as directed and as specified below of Make: Carrier, Edgetech, Zeco, National, VYHAN, NUTECH, BTS, Deltai) Capacity - not less than 25000 CFMii) Type - Indooriii) Frame structure - 46±5% extruded aluminium with hollow profileiv) Casing - Easily removable casing panels 50mm nominal thickness with cast-in-situ CFC free PUF insulation of density 40kg/cum mounted on aluminium extruded siderail base frame and vibration isolators/rubber pads (minimum 1\\" thick). Outer panel shall be pre-coated painted 0.8mm galvanized sheet steel and inner panel can be unpainted 0.60 mm GI sheet. All panels shall be sealed against against a full perimeter with nitrile rubber gasket.v) Mixing box section - double walled with return and fresh air dampers, with hinged doors and view port and marine light, Filter section - double walled with 50mm pre filters. The return air shall be closed loop entry into the extended mixing box.vi) Chilled water coil section - with 6/8 row deep coils of 12.7 mm or 9.5 mm OD copper tubes having aluminium fins with belled collorsvii) Fan section- solid double walled with necessary base for installation of suitable capacity and size DIDW backward curved, dynamically balanced and TEFC flame proof squirrel cage motor working on 3-ph 415 Volts 50 Hz power as per performance requirement with view port.viii) Heater section - complete with necessary fittings for heater installation, The electric heater element shall be constructed from 80/20 nickel chrome resistance wire which is connected to terminal pins and centered in SS304 stainless steel sheath tubes by compressed magnesium oxides.ix) Plenum or Access section - with view port and hinged door.x) Drain pan - shall be single wall, 1.5mm thick galvanized (and powder painted) or SS304 stainless steel construction as specified. The drain pan depth shall be 40mm with 500mm width and insulated with 3mm PE closed cell insulation underneath to prevent condensation. Drain pan shall have a side drainage design with MPT connection (43mm OD) for side discharge and trapping. |
| 159 | CHILLED WATER PIPING MS ERW CLASS- C PIPE WITH INSULATION- Material and Labour for chilled water piping including necessary fittings viz. flexible connections, bends, tees, reducers, flanges, air purge valves, drain valves, structural support, necessary clamps, vibration isolators, etc. including painting and supporting / fixing the pipe in excavated trenches or on floor / wall / ceiling with clamps, hangers, angles, channels (using anchor fasteners) with necessary accessories, duly insulated complete all as specified and directed by the engineer-in-charge.(a) 100 mm NB |
| 160 | (b) 80 mm NB |
| 161 | INSULATED VALVES (MANUAL) Material and Labour for PN 1.6 rated wafer type, short / medium pattern cast iron (CI) butterfly valve, conforming to IS 13095: 2020, having CI Gr. FG200 body conforming to IS 210: 2009, seat having EPDM / nitrile rubber lining, SG iron / ductile cast iron disc, SS AISI- 410 stem, flanged end connection, conforming to BS 10 Table D/E & ANSI B 16.1 CI- 125 with necessary accessories complete all as specified and directed by the Engr-in-Charge.(a) 100 mm NB |
| 162 | (b) 80 mm NB |
| 163 | BUTTERFLY VALVE : Supply, installation, testing and commissioning of PN 1.6 rated butterfly valve 80mm dia, conforming to IS 13095: 2020, and having CI body, SS disc, ‘O’ ring, etc., with IP55 rated actuator, capable of accepting up to 10 V DC and up to 20 mA electric signal and providing similar transduced feedback output to control system, duly insulated with flexible closed-cell elastomeric thermal insulation made of elastomeric foam based on synthetic rubber (NBR / PVC) complete with necessary accessories all as specified and directed by the Engr-in-Charge. |
| 164 | BALL VALVE : .Supply and fix of PN 1.6 rated forged brass ball valve,25mm dia having lever operated two piece design, renewable P.T.F.E. seat, brass ball, machined brass nickle plated stem, P.T.F.E. packings, full bore port opening, screwed female BSP parallel thread end connections, duly insulated with elastomeric thermal insulation with adhesives and other necessary accessories complete all as specified and directed by Engr-in-charge. |
| 165 | BALL VALVE :- Supply and fix of PN 1.6 rated forged brass ball valve, 32mm dia having lever operated two piece design, renewable P.T.F.E. seat, brass ball, machined brass nickle plated stem, P.T.F.E. packings, full bore port opening, screwed female BSP parallel thread end connections, duly insulated with elastomeric thermal insulation with adhesives and other necessary accessories complete all as specified and directed by engineer-in-charge. |
| 166 | 3 -WAY DIVERTING ON/OFF MOTORISED VALVE: Supply, installation, testing & commissioning of insulated 3 way ON/OFF valves 100 mm dia pipes of forged brass body in a single body, flow regulation cartridge assembly shall be precision ground, 304 SS and shall be available in three KPaD control range, minimum flow range shall be capable of being activated by minimum 10 KPa & shall be capable of controlling flow with in ± 5% of rated flow. The actuator shall be for ON/OFF operation of valve & shall be suitable for 230 ± 10% V & 50 ± 3% Hz. The valves shall be complete with thermostat control box with sensor in return air duct, contactors/breakers as required & control wiring to achieve the room temperature within the specified range. Make: Belimo / Honeywell / Schneider / Siemens |
| 167 | BALANCING VALVE :- Material and Labour for PN 1.6 rated precise balancing double regulation type cast iron (CI) balancing valve 80mm dia having CI Gr. FG200 body, EPDM / nitrile seal, stainless steel disc, ASTM A 276, Gr SS410 stem, EPDM / nitrile bush, MS gland nut, ASTM A 276 spindle, CI bonnet, SS304 baancing nut, MS bonnet cap, CI hand wheel, MS plug, stainless steel fastener, flanged end connection, etc., and duly insulated with elastomeric thermal insulation with necessary accessories complete all as specified and directed by the Engr-in-Charge. |
| 168 | NON-RETURN VALVE :- Supply, installation, testing and commissioning of wafer type PN 1.6 rated swing check type multidoor reflux valve (NRV) of 80mm dia, designed & tested as per IS 5312 (Part- 2): 1986, suitable to handle clear water having turbidity up to 5000 PPM, having CI body, door and diaphragm, leaded tin bronze seat rings and flange drilling standard end connection, etc, duly insulated and conforming to IS 1538: 1993 with necessary accessories complete all as specified and directed by the Engr-in-Charge. |
| 169 | 'Y'-TYPE STRAINER :- Supply, installation, testing and commissioning of cast steel bolted PN 1.6 rated cover Y-type strainer of 80mm size with CCS body conforming to ASTM A- 216 Gr. WCB, AISI 304 screen with 1.2 mm diameter perforation, 40 kg/cm2 body test pressure & 20 kg/cm2 maximum working pressure and standard flange end conforming to BS 10 Table F / Class-150, duly insulated complete all as specified and directed by the Engr-in- Charge. |
| 170 | PRESSURE GAUGE :- Supply and fix of 4\\" bourdon tube pressure gauge conforming to EN 837-1, having copper alloy process connection & pressure element, plastic black pointer & case, plastic crystal-clear window, snap-fitted in case, accuracy class 2.5, scale range 0- 25 bar with necessary accessories all complete as specified and directed by the Engr-in-Charge. |
| 171 | TEMPERATURE GAUGE :- Supply and fix of 6\\" dual scale (°F / °C), lower mount (radial), bimetal thermometer having 0.5 NPT process connection, Grade A accuracy class as per ASME B40.200, stem diameter 6.35 mm, laminated safety glass window, stainless steel 304 case, steam, process connection & joint, aluminium dial & pointer, IP67 protection, scale range 0- 60 °C with necessary accessories all complete as specified and directed by the Engr-in-Charge. |
| 172 | AIR VENT VALVE :- Material and Labour for PN 1.6 rated 25 mm air vent valve having brass body, cover, adopter, disc assembly & cap, stainless steel strainer, plastic float and 20 mm screwed threaded ends suitable for maximum operating temperature 100 °C installed on all high points in the water piping system to automatically remove the trapped air with necessary accessories all complete as specified and directed by the Engr-in-Charge. |
| 173 | EXPANSION TANK :- Supply and fix of ASME pre-charged vertical closed bladder Expansion tank 1000 Ltrs stamped for 125 psi (862 kPa) working pressure having carbon steel shell, conforming to ASME section VIII division 1 for Non-fired Pressure Vessels or IS 2825: 1969, coated (inside & outside) with anti-corrosion paint with a heavy-duty butyl replaceable bladder, ring base, lifting rings, and 20 mm NPT piping connection protected by strainer at the water inlet, air charging valve connection to facilitate adjusting pre-charge pressure to meet actual system conditions, along with pressurization unit consisting of 2# (1W + 1S) high pressure pumps of suitable pressure rating, mounted on M.S. frame, complete with interconnecting piping, isolation valves, NRV, Y- Strainer, pressure gauge, pressure transmitter, IP55 rated auto-logic panel with dry-run protection, electrical switchgear and interconnecting wiring complete with accessories as specified and directed by the Engr-in-Charge. |
| 174 | CONDENSER WATER PIPING :- Material and Labour for condenser water piping including necessary fittings viz., flexible connections, bends, tees, reducers, flanges, air purge valves, drain valves, structural support, necessary clamps, vibration isolators, etc. including painting and supporting / fixing the pipe in excavated trenches or on floor / wall / ceiling with clamps, hangers, angles, channels (using anchor fasteners) with necessary accessories complete all as specified and directed by the Engr-in-Charge. (a) 150 mm dia. |
| 175 | (b) 100 mm dia. |
| 176 | VALVES WITHOUT INSULATION (Manual) :- Material and Labour for PN 1.6 rated wafer type, short / medium pattern cast iron (CI) butterfly valve, conforming to IS 13095: 2020, having CI Gr. FG200 body conforming to IS 210: 2009, seat having EPDM / nitrile rubber lining, SG iron / ductile cast iron disc, SS AISI- 410 stem, flanged end connection, conforming to BS 10 Table D/E & ANSI B 16.1 CI- 125 with necessary accessories complete all as specified and directed by the Engr-in-Charge.(a) 100 mm dia. |
| 177 | (b) 150 mm dia. |
| 178 | BALANCING VALVE :- Material and Labour for PN 1.6 rated precise balancing double regulation type cast iron (CI) balancing valve 100 mm dia having CI Gr. FG200 body, EPDM / nitrile seal, stainless steel disc, ASTM A 276, Gr SS410 stem, EPDM / nitrile bush, MS gland nut, ASTM A 276 spindle, CI bonnet, SS304 baancing nut, MS bonnet cap, CI hand wheel, MS plug, stainless steel fastener, flanged end connection, etc., and duly insulated with elastomeric thermal insulation with necessary accessories complete all as specified and directed by the Engr-in-Charge. |
| 179 | NON-RETURN VALVE :- Material and Labour for PN 1.6 rated precise 80 mm balancing double regulation type cast iron (CI) balancing valve having CI Gr. FG200 body, EPDM / nitrile seal, stainless steel disc, ASTM A 276, Gr SS410 stem, EPDM / nitrile bush, MS gland nut, ASTM A 276 spindle, CI bonnet, SS304 baancing nut, MS bonnet cap, CI hand wheel, MS plug, stainless steel fastener, flanged end connection, etc., and duly insulated with elastomeric thermal insulation with necessary accessories complete all as specified and directed by the Engr-in-Charge. |
| 180 | POT STRAINER :- Supply, installation, testing and commissioning of PN 1.6 rated POT strainer 80mm, conforming to BS 6755-1, suitable for high capacity flow throughout full size inlet / outlet, having CI body & strainer bonnet, stainless steel perforated filter section, black rubber body / bonnet gasket, SS-410 valve and flange drilling standard end connections, etc., with accesories complete all as specified and directed by the Engr-in-Charge. |
| 181 | GALVANIZED STEEL SHEET DUCTINGSupply, installation, balancing and commissioning of factory fabricated galvanized steel sheet metal (G.S.S.) round / rectangular ducting of following sheet thickness having zinc coating of 180 g/m² total on both sides and complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, volume control dampers, hangers, supports, etc. as per approved drawings and conforming to the latest edition of IS 655: 2006 & HVAC Duct Construction Standards - Metal and Flexible of SMACNA along with required scaffolding work to install the ducts at site complete all as specified and directed by Engr-in-Charge.(a) 20 Gauge |
| 182 | (b) 22 Gauge |
| 183 | (c) 24 Gauge |
| 184 | Supply and fixix open cell nitrile rubber insulation of 19mm thickness for supply air complete all as specified and directed.Make : Armaflex / A-Flex / K-flex |
| 185 | Supply and fixix open cell nitrile rubber insulation of 13mm thickness for Return air complete all as specified and directed.Make : Armaflex / A-Flex / K-flex |
| 186 | AIR TERMINALS -Supply and fix of supply / return / exhaust air diffusers / grilles / louvers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core complete all as specified and directed by engineer-in-charge. Make: Ruskin Titus, Air Flow, Caryaire, System Air,Airmech,Airpro(a) Supply Air Grill/Diffuser Without Damper |
| 187 | (b) Return Air Grill/Diffuser Without Damper |
| 188 | Supply and fixing GI construction volume control dampers lever operated type to be mounted on duct complete all as specified and directed. Make: Ruskin Titus, Air Flow, Caryaire, System Air, Airmech, Airpro |
| 189 | Supply, erection, testing and commissioning of fusible link type fire damper as per UL555.Make: Ruskin Titus, Air Flow, Caryaire, System Air,Airmech,Airpro |
| 190 | HVAC PANEL -Supply, installation, commissioning and testing of factory made, CPRI type tested, indoor, cubical compartmental type \\"HVAC Panel\\" of suitable size, conforming to IEC 61439-1 &2, IEC 61641, having both sides openable with hinged double doors & locking arrangement and IP 42 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labeling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enameled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length & size, including fixing lugs, bolts, screws etc. complete with accessories as specified and directed by the Engr-in-Charge. Make: Any CPRI approved panel. The HVAC Panel shall comprise of the following: Busbar Chamber : [i] 01 Set (3L + N) of Al busbar of rated capacity 900 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete. INCOMING [i] 630 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having Micro-procesor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 No. [ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts - 01 No. [iii] LED phase indicators (Red, Yellow, Blue) - 01 Set |
| 191 | OUTGOING: [i] 125 A, 415 V, Ics = Icu = 25 kA, conforming to IEC 60947- 2, 50 Hz, FP MCCB with adjustable thermal settingSupply and fixixed magnetic settings with compression lug connectors and thermal magnetic trip unit (TMD)- 03 Nos. [for chillers] [ii] 125 A, 415 V, Ics = Icu = 25 kA, conforming to IEC 60947- 2, 50 Hz, FP MCCB with adjustable thermal settings (0.70- 1 X In) & fixed magnetic settings with compression lug connectors and thermal magnetic trip unit (TMD)- 02 Nos. [for AHU] [iii] 40 A, 415 V, Ics = Icu = 16 kA, conforming to IEC 60947- 2, 50 Hz, TP MCCB with adjustable thermal settingSupply and fixixed magnetic settings with compression lug connectors and thermal magnetic trip unit (TMD)- 11 Nos. [for chilled water supply pump, condenser water supply pump & cooling tower] , [iv] 32 A SPN MCB - for local light controls[v] LED phase indicators (Red, Yellow, Blue)- 12 Set [v] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts12 Nos. [vi] DOL Starter suitable for chilled water circulation pump - 04 Nos.[vii] DOL Starter suitable for condenser water pump -04 Nos. [viii] DOL Starter suitable for cooling tower motor -02 Nos.Size Not less than - 2000W X 2000H X 400 D. Note: The start/stop and sequencing/scheduling of pump motors shall be integrated with the CPM as per specifications |
| 192 | Supply, installation, testing and commissioning 3 phase and neutral, 415 volts indoor type, factory made free standing floor mounting or Wall mounting, dust and vermin proof cubical type, AHU panel fabricated from 2.0 mm Indoor type thick CRCA sheet duly compartmentalized for each switch gear, front hinged opening locking arrangement with chromium plated 19 mm dia locks, louvers and air vent gasket for natural air, `U` shape rubber gasket, voltmeter, ammeter, Frequency meter. Panel should be anti corrosive coating and finally epoxy polyester powder coating of Siemens Grey shade (RAL-7032), Protection class IP 43, fully compartmentalized design with 150 Amp Al. Busbars. and comprising following:-Incoming - 125 A MCCB FP 35 KA with MF meter and dispalysOutgoing:(i) 40 A MCCB TP 25 KA - for AHU fan(ii) 63 Amps, TP, MCCB, 25 KA – 01 No For Humidistat/ Heater control box (iii) 10 A SP MCB - for Thermosat and 3-way diverting valve(iv) FASD/DOL starter for AHU fanNote: Minor changes in control panel for any extra/additional provisions as may be essentially required for succesful commisioning and functioning of various plants and components as per the overall requirement to meet the specified air-conditioning perforamance shall be provided by the contractor without any additional cost to the department. |
| 193 | Humidistat & Strip Heaters: Fully autamated humidity control system consisting of 36 KW strip heater capacity in steps of 3 KW & control panel. The manufacturer shall furnish a control box containing contactors & relays of appropriate current capacity/size, circuit breaker and appropriate Airconditioning application Humidisat to ensure precise humidity control of 60 ± 5%. Heater control box shall be mounted on the designated hand side of the unit. |
| 194 | POWER CABLES -Material and Labour for ISI marked 1.1 kV grade , XLPE insulated armoured cables, conforming to IS: 7098 (Part 1)- 1988 having stranded aluminium compact shaped conductor as per Cl. 2, IS: 8130- 1984, PVC inner sheath, single armouring of galvanized steel strip/wire and PVC Type ST2 outer sheath conforming to IS: 5831- 1984, including termination complete as specified and directed. (a) 3.5 core, 25 mm² (for AHU) |
| 195 | (b) 3.5 core, 35 mm² ( for chillers) |
| 196 | (c) 4 core, 10 mm² ( for Heater) |
| 197 | (d) 3.5 core, 4 mm² (for pumps and Cooling tower) Cu |
| 198 | CABLE TRAY Supply, Installation, laying and erection of G.I. Perforated and Ladder Type cable tray with reducer, bends, tees, clamps and couplers for fixing of cable to complete the job. It should also comply load testing of IS 14927-1 (2001). (a) Material and Labour for GI Cable Tray (150x50x1.2), perforated and painted with powder coating including nuts, bolts, suspenders etc all as specified and directed by Engr-in-Charge. |
| 199 | (b) Material and Labour for GI Cable Tray (200x50x1.2), perforated and painted with powder coating including nuts, bolts, suspenders etc all as specified and directed by Engr-in-Charge. |
| 200 | Material and Labour for earthing complete with GI earth plate electrode of 60 cm x 60 cm x 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to copper strip of size 32 mm x 6 mm as earth lead, by means of bolts, buts, check nuts and washers of galvanised iron or steel, galvanized iron pipe of 40 mm diameter, connected to earthing test point, all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. complete as specified and directed by the Engr-in-Charge. Notes: (i) The cost of GI earth continuity conductor with GI pipe 40mm medium grade upto 7.5m is deemed to be included in r/o above item (ii) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement. The cost for the same is deemed to be included in above item. (iii) Earthing shall be meshed together and will be terminated on two diffrent wall mounted common bus/test link made of 32mm x 6 mm GI strip with round holes for bolting of earthing connections. |
| 201 | Material and Labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required GI strip of 32 mm x 6 mm diameter complete as specified and directed by the Engr-in-Charge. |
| 202 | HDPE MAKE-UP WATER TANK FOR COOLING TOWER- Supply and fix multilayered HDPE make-up water tank 3 layer type of 5000 litre capacity - 02 Nos made up of 100% virgin material, having 100% UV stabilized white outer layer, threaded lid, extra insert lid for protection against algae formation complete with inter-connection piping and non-return valve etc. complete all as specified and directed.- The HDPE tanks shall be placed on a sturdy PCC platform at appropriate height.- Inlet and outlet water connections as per design or as required shall be made in the tanks. Both tanks will be in parallel.- The HDPE tanks shall be secured on all four side with suitable MS framework up to a height of 4 feet to withstand a storm wind pressure.Note : Supply & Installation Of Structural Steel & Other Civil WksThe scope of work for air conditioning system also includes all kind of civil works and complete supply, transport, unloading, shifting & Fabrication of steel sections and erection of MS base frames, MS angle channels, flat,anchor fasteners etc. for supporting various items of equipment such as various panels/switchgear, dummy panels, adapter boxes addition support for proper cable termination, MS Fabricated cable trays, push button stations, junction boxes, DB etc. The scope include welding, bolting, chipping, grouting etc., including applying one anti-rust coat of approved primer and two finished coats of approved paint with primer & paint, breaking and finishing of walls, floors etc. Contractor has to apply one coat of anti-rust paint (Red-oxide ) before installation. The scope is inclusive of minor civil work as required, supply of GI hardware materials, consumables, tools & tackles and necessary labour with supervision but not limited to, and complete as per approved drawings, specification and directions of Engineer-In charge. The scope also includes transportation of material from owner’s issue point to actual place of work by contractor's own lifting and transporting arrangement.The cost of all these is deemed included in the quoted price against each item and nothing extra shall be payable to contractor. |
| 203 | Supply and fix in replacement of gun metal gate or globe valve of 50 mm dia with iron wheel head screwed both ends for iron pipes complete all as specified and directed. |
| 204 | Supply and fix in replacement of gun metal gate or globe valve of 25 mm dia with iron wheel head screwed both ends for iron pipes complete all as specified and directed. |
| 205 | Supply and fix in repairs steel water tubing galvanised iron 50 mm dia medium grade with all fittings ISI marked all as specified and directed by Engr-in-Charge. Make - Jindal/Tata/Prakash |
| 206 | Supply and fix in repairs steel water tubing galvanised iron 50 mm dia medium grade with all fittings ISI marked all as specified and directed by Engr-in-Charge. Make - Jindal/Tata/Prakash |
| 207 | General Notes for entire scope of work from item No. 146.00 to 189.00 :(i) Supply & Installation Of Structural Steel & Other Civil Wks(ii) The scope of work for air conditioning system also includes all kind of civil works and complete supply, transport, unloading, shifting & Fabrication of steel sections and erection of MS base frames, MS angle channels, flat,anchor fasteners etc. for supporting various items of equipment such as various panels/switchgear, dummy panels, adaptor boxes addition support for proper cable termination, MS Fabricated cable trays, push button stations, junction boxes, DB etc. (iii) The scope include welding, bolting, chipping, grouting etc., including applying one antirust coat of approved primer and two finished coats of approved paint with primer & paint, breaking and finishing of walls, floors etc. Contractor has to apply one coat of antirust paint (Red-oxide ) before installation. (iv) The scope is inclusive of minor civil work as required, supply of GI hardware materials, consumables, tools & tackles and necessary labour with supervision but not limited to, and complete as per approved drawings, specification and directions of Engineer-In charge. (v) The scope also includes transportation of material from owner’s issue point to actual place of work by contractor's own lifting and transporting arrangement. (vi) The cost of all these elements deemed to be included in the quoted rate against each item and nothing extra shall be payable. |
| 208 | AIR CURTAIN Supply, installation, testing and commissioning of commercial air curtain unit for prevention of dust and conditioned air losses, along with suitable flameproof motor single/three phase, 50 Hz, conforming to IS 12615: 2011, IS/IEC 60079-1: 2007, IS 3682: 1966, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of epoxy resin paint (oven baked) with MS - CRC 18 gauge square perforated suction grills, aluminium alloy fans, limit switch(es) and single/three phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5 m/s air velocity at floor level for door opening 70\\" X 96\\" complete all as specified and directed by Engr-in Charge. Total in Figures 0.0 23 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender