Tender For Welcome Maintenance For Offrs And Other Services To Jcos/Ors Md Accn In Zone A Area Under Age B/R-I Under Ge (Central) Khadki.
Tender Value
43 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
16 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance For Offrs And Other Services To Jcos/Ors Md Accn In Zone A Area Under Age B/R-I Under Ge (Central) Khadki.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 2 | Material and labour rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:6), finished with sagol finish on plastered surface of internal walls, complete all as specified and as directed. |
| 3 | Material and labour rendering 15 mm thick in two layers on stone masonry surfaces in CM (1:4), finished even and smooth without using extra cement complete all as specified and as directed. |
| 4 | Material and labour rendering 5 mm thick on concrete surfaces as in ceiling in CM (1:3), finished with sagol finish on plastered surface of internal walls, complete all as specified and as directed. |
| 5 | Material and labour for 1 mm thick wall care putty on walls/ceiling complete all as specified and as directed. |
| 6 | Material and labour for preparation of old plastered or unplastered surfaces of walls/Celing and applying one coat of oil bound emulsion distemper of approved tint complete all as specified and as directed. |
| 7 | Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil bound emulsion distemper of approved tint, including priming plastered and other surfaces with alkali resistant primer complete all as specified and as directed. |
| 8 | Material and labour for preparation of newly plastered surfaces of ceilings and applying two coats of oil bound emulsion distemper of approved tint, including priming plastered and other surfaces with alkali resistant primer complete all as specified and as directed |
| 9 | Material and labour for preparation of old plastered surfaces of walls/Ceiling and applying two coats of oil bound emulsion distemper of approverd tint, including priming plastered and other surfaces with alkali resistant primer complete all as specified and as directed. |
| 10 | Material and labour for one coat of synthetic enamal paint of approverd tint over wooden surfaces including preparation of old surfaces over 10 cm width or girth complete all as specified and as directed. |
| 11 | Material and labour for two coats of synthetic enamal paint of approverd tint over coat of primer over wooden surfaces including preparation of New surfaces over 10 cm width or girth complete all as specified and as directed. |
| 12 | Material and labour for one coat of synthetic enamal paint of approverd tint on steel surfaces including prepration of old surfaces of any description, over 10cm in width or girth complete all as specified and as directed. |
| 13 | Cleaning the surface with wire brush, detecting sources of leakages and removing / taking down unsound treatment / surface, Material and labour for carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instructions complete and as directed, the PU foam shall have 100% solids and solvent free, and shall expand 30-40 times of its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50 complete all as specified and as directed. |
| 14 | Material and labour for fixing the metallic packer for hydrophobic PU foam and sealer for Sl Item No. 15 above as per manufacturers specifications including making suitable holes, complete all as specified and as directed. |
| 15 | Material and labour for the tile joint chemical cleaning and re-grouting carefully by washing the existing tile with heavy duty tile cleaner preferably of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with white/matching colour)epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, curing, cleaning the surface etc, and as per the sample approved at site complete all as specified and as directed. |
| 16 | Material and labour for 25mm thick plain cement concrete (1:2:4), type B0, using 12.5 mm graded stone aggregate as in leveling course of floor including demolition of existing PCC floor, complete all as specified and as directed. |
| 17 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thickness (below of above ground level) and removing the debris outside the defence land complete all as specifed and as directed. |
| 18 | Material and labour for non skid ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm, as in floors etc. set in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15mm thick screed bed in CM (1:6) including dismantling existing floor of any type complete all as specified and as directed. |
| 19 | Material and labour for vitrified tiles light shade 10mm thick (square/rectangular) polished area of each tile 600mm x 600mm/605mm x 605mm over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including demolition and removing the debris outside the defence land complete all as specified and as directed. |
| 20 | Description all as per Ser item No 19 above but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including demolition and removing the debris outside the defence land complete all as specified and as directed. |
| 21 | Material and labour non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4), including demolition existing floor of any type complete all as specified and as directed. |
| 22 | Description all as per Ser item No 22 above but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including demolition and removing the debris outside the defence land. |
| 23 | Material and labour glazed ceramic tiles as in vertical surface 300 x 600 x 7mm / thick or equivalent set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in cement mortar (1:4) and dismantling existing floor of any type complete all as specified and as directed. |
| 24 | Material and labour 15-20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, win dow cills, cooking plat forms and like fixed over and including 10 mm thick backing coat in CM (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite of any type complete all as specified and as directed. |
| 25 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed |
| 26 | Material and labour machine cut cudappah stone slab 20-25mm thick over and including 15mm thick cement screed base in CM(1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and rounding to edge including dismantling existing floor of any type complete all as specified and as directed. |
| 27 | Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc, including taking down old un serviceable windows and making good the wall for fixing new window, complete all as specified and as directed. |
| 28 | Supply and fix aluminium louvered ventilators of section size 80mm x 20mm x 1.50mm including 5mm thick frosted glass fixed in half portion and adjustable type louvers in another half and stainless steel wire mesh fixed type on out side frame etc., including taking down old un serviceable ventilators and making good the jams and wall for fixing new window complete all as specified and as directed. |
| 29 | Supply and fix in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm, all specified in PS complete all as specified and as directed. |
| 30 | Taking down chowkats or frames with shutter without taking off shutters from frame of door/window of any description area n.exc 1.50 sqm sqm each and removing from the site complete all as specified and as directed. |
| 31 | Taking down chowkats or frames with shutter without taking off shutters from frame of any description area exc 1.50 sqm but n.exc 4.00 sqm each and removing from the site complete all as specified and as directed. |
| 32 | Taking down shutters of any description area exc. 1 sqm but n exc 2 sq. m each complete all as specified and as directed. |
| 33 | Supply and fix factory made internal PVC door frame of size 50x47mm single rebated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and as directed. |
| 34 | Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge. |
| 35 | Supply and fix 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specifed and as directed. |
| 36 | Supply and fix 35mm thick second class hard wood plain framed panelled factory made door shutters (two panels) with lock rail and panel of 12 mm thick veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 37 | Supply and fix 30mm thick second class hard wood glazed and skelton shutters, wire mesh, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of shutters including wire mesh as specified in SSR-I, Section 8.24(a) supplied and fitted to chawkats complete all as specified and as directed. |
| 38 | Supply and fix for 30mm thick flush shutter, solid core construction, with block board core plywood face panels, commercial type on both sides, chemically treated against termite infestation, complete all as specified and as directed. |
| 39 | Material and labour for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated both side side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including external teak wood lipping, 6mm thick fixed with nailse around the partical board etc complete all as specified and as directed. |
| 40 | Supply and fix 40mm Width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 41 | Supply and fix aluminium anodised barrel tower bolt 200mm long of extruded section with steel screws complete all as specified and as directed. |
| 42 | Supply and fix extruded aluminium alloy handles, fabricated type, anodised of size 150mm fixed with screws or welded complete all as specified and as directed. |
| 43 | Supply and fix extruded aluminium alloy handles, fabricated type, anodised of size 100mm fixed with screws or welded complete all as specified and as directed. |
| 44 | Supply and fix aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 45 | Supply and fix 100mm size stainless steel medium weight butt hinges for door shutters and frames fixed with bright screwes complete all as specified and as directed. |
| 46 | Supply and fix galvanised mild steel wire cloth, 036 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed. |
| 47 | Supply and fix in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in aluminium window/ wire mesh door / steel window complete all as specified and as directed. |
| 48 | Supply and fix floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, over all length of cover plate 150mm size complete all as specified and as directed. |
| 49 | Supply and fix in repairs harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc., complete all as specified and as directed. |
| 50 | Supply and fix galvanised tubing 15mm bore medium grade, galvanised, ISI marked with all fittings and fixed complete to walls and ceilings or laid in floors including taking down existing complete all as specified and as directed. |
| 51 | Supply and fix galvanised tubing 20mm bore medium grade, galvanised, ISI marked with all fittings and fixed complete to walls and ceilings or laid in floors including taking down existing complete all as specified and directed. |
| 52 | Supply and fix in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 53 | Cleaning of serviceable PVC water tanks capacity exc. 250ltrs and n.exc 500ltrs, removing all scales and dirt etc from tank and from mouth of circulating pipes etc complete all as specified and as directed. |
| 54 | Cleaning of serviceable PVC water tanks capacity exc. 500 ltrs and n.exc 1000 ltrs, removing all scales and dirt etc., from tank and from mouth of circulating pipes etc complete all as specified and as directed. |
| 55 | Supply and fix in repairs ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20mm bore dia of pipe complete all as specified and as directed. |
| 56 | Supply and fix in repairs cast iron floor trap / nahani trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joints, dia of outlet 100 mm, complete all as specified and as directed. |
| 57 | Supply and fix in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap 110/110mm bore dia, 110mm PVC (SWR) WC connector with lip ring and connection to flushing pipe anti syphonage pipe, complete including making good to floor fixed in repairs complete all as specified and as directed. |
| 58 | Supply and fix vitreous china wash down water closet pan (pedestal pattern), white, including fixing bolts, flushing cistern and flush pipe fixed as in repairs, complete all as specified and as directed. |
| 59 | Supply and fix in repair PVC valveless, syphonic action type, flushing cistern, 10ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, complete all as specified and as directed. |
| 60 | Supply and fix in repairs viterious china wash basin white flat back size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including necessary brackets CP wastes and other fittings all as specified and as directed. |
| 61 | Supply and fix in repairs swan neck pillar taps chromium plated, cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nuts screwed for iron pipes 15mm dia fixed in repairs complete all as specified and as directed. |
| 62 | Supply and fix in repair bib taps long body, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe15mm bore all fixed complete all as specified and as directed. |
| 63 | Supply and fix in repairs Two way bib taps long body, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe15mm bore all fixed in repairs complete all as specified and as directed. |
| 64 | Supply and fix in repairs wall mixer 3 in 1, brass chromium plated, for mixing hot & cold water screwed down for iron pipe and fixed al fixed in repairs complete all as specified and as directed. |
| 65 | Supply and fix in repairs brass chromium plated shower rose 150mm size with swivel joint including fixing to steel pipe 15mm dia fixed in repairs complete all as specified and as directed. |
| 66 | Supply and fix in repairs angle stop cock, chromium plated brass, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm dia fixed in repairs complete all as specified and as directed. |
| 67 | Supply and fix in repair brass chromium plated tubular towel rail, 20mm dia, D type, 500mm long between flanges a fixed in repairs complete all as specified and as directed. |
| 68 | Supply and fix in repairs health faucet with 1.50 meter SS braided connection pipe fixed in repairs complete all as specified and as directed. |
| 69 | Supply and fix in repair Soap dish, brass chromium plated, all as per Cat Part No BA-45 of Prayag or equivalent makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed. |
| 70 | Supply and fix in repair toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. |
| 71 | Supply and fix in repair 600mmx600mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as per Prayag Cat No 553-F or techno commercially equivalent makes specified in PS complete all as specified and as directed. |
| 72 | Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 73 | Material and labour for repairs in PVC connection 450mm long with 2 nos brass check CP nuts as suitable complete all as specified and as directed. |
| 74 | Supply and fix rotational moulded three layered polythene water storage tank (cylindrical vertical with closed top) with ISI mark embosed on it, white, hoisted and fixed in position complete all as specified in SSR part I, capacity of tank 500 ltrs including 20 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description.complete all as specified and as directed. |
| 75 | Supply and fix rotational moulded three layered polythene water storage tank (cylindrical vertical with closed top) with ISI mark embosed on it, white, hoisted and fixed in position complete all as specified in SSR part I, capacity of tank 1000 ltrs including 20 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender