Tender For Renovation And Construction Of Lwss Malyour From New Source Mani Khad In Tehsil Ghumarwin District Bilaspur (Sh: Construction Of Single Room Pump House 17.17 Sqmt Area Over Existing Foundation Of Lab Building At Sanoti Under Cv Malyour).
Tender Value
3.39 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
6 days left
EMD
6800
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bilaspur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Construction Of Lwss Malyour From New Source Mani Khad In Tehsil Ghumarwin District Bilaspur (Sh: Construction Of Single Room Pump House 17.17 Sqmt Area Over Existing Foundation Of Lab Building At Sanoti Under Cv Malyour).
BOQ
| Sl. No. | Item Description |
| 1 | Providing & laying c.conc. 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work & reinforcement for reinforced concrete work in. |
| 2 | Lintels,beams girders,bressumers & cantilevers upto floor level. |
| 3 | Columns, pillars posts and struts upto floor two level. |
| 4 | Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:4 (1cement : 4 sand) in all leads and lifts and to the entire satisfaction of the Engineer-in-charge |
| 5 | Providing & fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges,jump lock jamb,beed & if required angle threshold of mild sttel angle of section 50 x 25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means,adjustable lugs with split & tails to each jamb including steel butt hinges 2.5 mm thick with guards,lock strike plare & shock as specified & applying a coat of approved steel primer after pretreatment of the surface as directed by engineer in charge. ( profile \\"a\\" ) |
| 6 | Providing and fixing wood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40mm thick in all leads and lifts and to the entire satisfaction of the Engineer-in-charge |
| 7 | Prov. & fixing wire gauge shutters using wooden for doors,windows & clerestrey windows including bright finished black enameled iron hinges with necessary screws and to the entire satisfaction of the Engineer-in-charge |
| 8 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain. |
| 9 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness and to the entire satisfaction of the Engineer-in-charge. |
| 10 | Beams, cantilevers, girders & lintels, sides & soffits of beams, haunching, cantilevers,bressumers 1.00 mts. In depth in all heights from floor and to the entire satisfaction of the Engineer-in-charge |
| 11 | Columns,pillars,posts and struts in square,rectangular or polygonal in plan and to the entire satisfaction of the Engineer-in-charge |
| 12 | Providing and laying cement concrete work 1:1.5:3 (1cement: 1.5 sand: 3 graded stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 13 | (a) Suspended floors, roofs, landings and shelves and their supports, balconies, beams ,griders bressumers and cantilevers upto all floor level and to the entire satisfaction of the Engineer-in-charge. |
| 14 | Cement concrete flooring 1:2:4(1cement:2sand:4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement (40mm thick) in all leads and lifts and to the entire satisfaction of the Engineer-in-charge |
| 15 | 20mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar4 1:6(1cement:6sand) kin all leads and lifts and to the entire satisfaction of the Engineer-in-charge |
| 16 | 6 mm cement plaster to ceiling in CM 1:3 (1Cement :3 Sand) in all leads and lifts and to the entire satisfaction of the Engineer-in-charge |
| 17 | Providing plinth protection 50 mm thick in cement concret 1:3:6 (1cement :3 sand: 6 graded stone aggregate 20mm nominal size) including finishing of the top surface of concrete smooth in all leads and lifts and to the entire satisfaction of the Engineer-in-charge |
| 18 | Providing Tor steel reinforcement for RCC work including bending, cutting, binding & placing in position complete upto floor two level and to the entire satisfaction of the Engineer-in-charge |
| 19 | Applying two coat of wood preservative on new wood based surface after and including preparing the surface by thoroughly cleaning dirt, dust and other foreign matter and to the entire satisfaction of the Engineer-in-charge |
| 20 | Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil dirt grease and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink in all leads and lifts and to the entire satisfaction of the Engineer-in-charge |
| 21 | Painting two coats(excluding priming coat) on new wood and wood based surface with ready mixed paint brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads and lifts and to the entire satisfaction of the Engineer-in-charge |
| 22 | White washing with lime on undecorated walls surface (two coats) to give an even shade including thoroughly brooming the surface dirt dust mortar dirt and other foreign matter in all leads and lifts and to the entire satisfaction of the Engineer-in-charge |
| 23 | Finishing wall with water proofing cement paint of approved brand & manufacture & of required shade on undecorated wall surfaces (two coats) to give an even shade after thotoughly brushing the surface to remove all dirt & remains of loose powdered materials. |
| 24 | Providing and fixing M.S.fan clamp(Type-I of 16mm dial M.S. Bar bent to shape with hooked ends in RCC. Slab during laying including painting the exposed portion of loop all as per standard design complete and to the entire satisfaction of the Engineer-in-charge |
| 25 | Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dial meters bolts and nuts and wooden plug and embeding in cement mortar block 30x10x15cm (1:3:6(1cement:3sand:6 graded stone aggregate 20mm nominal size and to the entire satisfaction of the Engineer-in-charge |
| 26 | Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc.completeand to the entire satisfaction of the Engineer-in-charge |
| 27 | Sliding door bolts 250 x 16mm. |
| 28 | Tower bolts (Barrel type) leads and lifts. 200 x10 mm. |
| 29 | Tower bolts (Barrel type) leads and lifts. 150 x10 mm. |
| 30 | Handles 125mm dia |
| 31 | Providing and fixing of MS round bars in windows and ventilators. |
| 32 | Stone / Boulder filling under foors / behind retaining walls in all leads and lifts and to the entire satisfaction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender