Tender For annual repair & maintenance of Of Lwss Ratti Kotlu Galma In Gp Galma In Tehsil Balh Distt. Mandi (H.P). (Sh:- Construction of Reinforced Cement Concrete Sector Storage Tank 30,000 Liters Capacity At Kandhi). Rs. 316648 /- Only
Tender Value
3.16 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
6 days left
EMD
6400
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of Of Lwss Ratti Kotlu Galma In Gp Galma In Tehsil Balh Distt. Mandi (H.P). (Sh:- Construction of Reinforced Cement Concrete Sector Storage Tank 30,000 Liters Capacity At Kandhi). Rs. 316648 /- Only
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches etc. in earth work in all kind of soils such as pick work jumper work,saturated soil including blasting soft/hard rock, chiseling soft/hard rock where blasting is prohibited in all lifts including trimming and dressing of sides, levelling of bed, stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15cm. layers when required into plinths,side of foundations etc including consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated soil as directed with in all leads & lifts and shoring strutting, timbering and dewatering where ever required as per direction & entire satisfaction of the Engineer-in-Charge. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge. |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge. |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1½:3 (1 Cement: 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge. |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge. |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge. |
| 9 | Manufacturing, supplying, fabrication and fixing of MS Fabricated Protection Pannel 750mm x 750mm made with MS Angle 40x40x4 mm for frame, MS Angle 30x30x3mm for cover, MS Flat 25x5mm for fixing of sliding door bolt and MS Sheet (10 gauge) 3.15mm thick for protection of manhole covers of storage tanks including the cost of cutting and welding of MS Angle, MS Flat & MS Sheet, Embedding in RCC Slab By drilling holes in MS Angle & in RCC Slab, provision for providing and fixing sliding door bolt 300x16mm, MS Handle 100mm, Lock and applying a coat of red Lead paint & painting two coat with steel paint (Firroza Blue) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 10 | Laying, jointing, testing and Carriage of GMS tubes (Light Grade) in trenches including tube fitting such as bends, tees, air valves, unions and collars etc (Earth work to be measured and paid for seprately) complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge. |
| 11 | Inlet Pipe 80 mm dia |
| 12 | Outlet Pipe, Scour pipe 80 mm dia |
| 13 | Providing and fixing Gun Metal Bronze Wheel Valve (Heavy Duty) of reputed make IS: 778/1980, CL-1 complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge. |
| 14 | 80 mm dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender