Tender For Construction Of 3 Class Rooms Building At Kumara Gurupara Swamigal Primary School In Srivaikundam Town Panchayat In Thoothukudi District Under The Scheme Of Natural Calamities 2025-26
Tender Value
52.20 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
15 days left
EMD
52200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 3 Class Rooms Building At Kumara Gurupara Swamigal Primary School In Srivaikundam Town Panchayat In Thoothukudi District Under The Scheme Of Natural Calamities 2025-26
BOQ
| Sl. No. | Item Description |
| 1 | Name of Work: Construction of 3 Class Rooms Building at Kumara Gurupara Swamigal Primary Schoolin Srivaikundam Town Panchayat in Thoothukudi District under the Scheme of Natural Calamities 2025-26 |
| 2 | Earthwork excavation for Foundation to full depth as per designed in all soils and subsoils except soft distintegrated rock not requiring blasting and hardrock requiring blasting and bailing water wherever necessary refilling the sides of foundtionwith excavated earth other than sand in layers |
| 3 | Supplying and filling in foundations and basement with filling M-Sand in layers not exceeding 15cm thick well watered rammed and consolidered etc |
| 4 | Plain Cement Concrete 1:4:8 mix using 40mm gauge hand broken and hardbroken granite stone jely complying with standard specifications in foundations and basement |
| 5 | Refilling the approved good quality earth in plinths areadevelopment etc wherever specified in layers is not exceeding 200mm thick with available earth at side |
| 6 | Supplying and filling of good convey earth locally available earth transported from the outside including consolidation levelling specified in layers of not exceeding 200mm thick etc complete |
| 7 | Supplying and erecting shttering including necessary support and strutting upto 3M height for plane surface as detailed below in all floors with all cross bracings using mild steel sheets of size 90x60cm and 10BG stiffened with welded mild steel angle of size 25mmx 25mmx 3mm for boarding laid over silveroak joists of size10cmx6.5cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at not morethan 75cm centre to centre etc |
| 8 | Footing plinth beam etc |
| 9 | Plain surface such as roofslab floor slab beams lintels loft sill slab stair case waist portico slab and other similar works |
| 10 | Square and rectangular columns and small quntities such as sunshades parapet cumdrops window boxing fin projections and odther similar works |
| 11 | Upto basement |
| 12 | Groundfloor |
| 13 | Concrete |
| 14 | Providing and laying in postion M-20 Grade in accordance with IS 456-2000 using 20mm and down grade hardbroken granite stone jelly for all rcc items of works with minimum cement conctent of 350KG m3 and maximum water cement ratio of 0.50 including admixture in recommended propotions as per IS:9130 to accelerate rated setting of concrete improve workability without impairing stregth and durability |
| 15 | Foundation &Basement |
| 16 | Steel -Re 500D :supply fabrication and placing or reinforcement steel of high yield strength ribbed bars of various diameters and grade conforming to IS1786 for reinforced concretework thework includes recoiling straightening cutting bending fabricating and placing in position at all levels including lead and lift according to drawings specifications etc complete and supply use of 18G black annealed binding wire double fold to tie the bars in positions and providng precast cement PVC cover blocks for main reinforcement to ensure specified cover and complete including all labour charges etc |
| 17 | Brick work in following cement mortar 1:5 using best quality II Class table moulded bricks 8\\"3/4 x41/4\\"x23/4 for foundation and basement including curing etc complying with standard specification including scaffloding curing cost of reinforcement etc all complete as per specifications |
| 18 | Foundation &Basement |
| 19 | Brick partition walls of 11.50cm thickness using best quality IIClass table moulded bricks 8\\"3/4x41/4x23/4\\" in cement mortar1:3 using hoop iron reinforcement if found necessary including curing etc |
| 20 | Groundfloor |
| 21 | Terrace Floor |
| 22 | Plastering Work |
| 23 | Supplying and applying of twocoats of putty of 3mm thick over the exceposed RCC Surface of ceiling including finshing the joints smoothy with grinding machine and the surface shall be throughly cleaned out of dus and scrubbing the surface shall then be allowed to dry for atleast 48 hours it shall then be sand papered to give a smooth and even surface any unevenness shall be made goodby applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying |
| 24 | Providing and applying 12mm thick cement plaster in cm1:5 to wall s internally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150mm in all direcations scaffolding rounding off or chambering of corners offsets fin bands projections etc and cleaning of surface raking out joints roughening of surface chiseling the undulted surface wherevernecessary and curing etc all material an labour complete in all respects including all lead lift and descant and as directd |
| 25 | Providing and applying 12mm thick cement plaster in cm1:5 to walls externally in single coat at all levels to correct line and level including scaffolding rounding off or chambering of corners offsets fin bands projections etc and cleaning of surface raking out joints roughening of surface chiseling the undulated surface wherever necessary and curing etc all material and labour complete in all respects |
| 26 | Flooring & Dadooing |
| 27 | Paving the floor waith best approved quality finepolished shahabad stone slabs of size600x600 of 18/20 mm with machine cutedges and matching marble slab not less than 100mmwidth other than adanga marbles as borderlaid over acement mortar bed of 20mm thick using cement mortar 1:3 etc |
| 28 | Providing granolithic floor finish of the following thickness with plaincement concrete 1:2:4 using 10to 12mm gauge hard broken stone jelly including laying finshing and the top rubbed smooth with power trawl thread lining curing etc |
| 29 | Providing fabricating and fixing MS Grills windows and ventilator gates ladders rail pipes nosing angles with ms lugs in staircase steps etc made out of MS Rods flats angles pipes channels etc including necessary fixtures complete as per drawings and specifications and as directed |
| 30 | Supplying andfixing in position steel balustrades using 20mm square rods spaced at 150mm centre to centreso that the two balustrades in each step shall be placed centrally and the top of balustrades connected with the hand railss by menas of MS Flats of size40mm x 6mm in the groove 40mmx 6mm provided at the bottom of hand rail the bottom of balustrades shall be fixed onto the top of step concrete an additional ms flat of size 50mmx 6mm shall be provided at the centre of balustrades connecting all squard rods to theentire lenghth including cost of square rods flat and applying one coat of red oxide primer to the iron surfacesetc |
| 31 | Supplying and fixing 40mm dia GIPipe for stair case hand rails including labour charges for cutting welding and fixing withms flats etc |
| 32 | UPVC Window at and equal interval not exceeding 100mm edge between them all members are paited with one coat of anti corrosive red oxide primet as directed by the departmentall officers all sections should be in confiremend with the cost includes cost of allmaterialslabour charges and other incidental charges etc |
| 33 | Manufacturing supplying and fixing of upvc doors with following specification ms angle of sie 40x40x6mmat 3.5KG use for outerframe and ms angle of size 35x35x5mm at 2.6 kg for the shutter frame stiffeners with 32x6mm at 1.5kg ms flat is provided as the lock rail of the door and welded intact on both ends to the shutter frame 18G cr sheets of best quality is laid as panel in the shutter frames 18x5mm at 0.70kg ms flat is welded over the 32x6mm at 1.5 ms flat on the rear side of the door sandwiching the cr sheet for rididiyt additional stiffneres with 18x5mm at 0.7kg ms flats are provided diagonally on the rear side of the shutter is provided 6Nos |
| 34 | Painting Work |
| 35 | Supplying and painting new ceiling plastered surface with two coats of distembering one coat of distemper primer |
| 36 | Supplying and painting new Plastered internal wall surface with two coats of distempering one coat of distemper primer |
| 37 | Supplying and painting the walls withone coat of wall primer and two caots of exterior emulsion as instructed by the departmental officers including prepartion of surface curing etc complete in all floors complying with standard specification |
| 38 | Weathering course concrete using best quality broken jelly of 20mm uniform gauge in pure slaked lime proportion of brick jelly to lime being 32:121/2 by volume laid over in single layer and consolidatedto the required slope and finshed thickness and beating the concrete with wooden beaters of approved pattern keeping the surface constantley wetby sprinkling lime jiggery water etc |
| 39 | Finshing the top of roof withone course of machine pressed tiles of size 230mmx230mmx20mm of approved quality set in cement mortar 1:3 12mm thick mixed with water proofing compound conforming to ISS at by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and waterproofing compond including curing etc |
| 40 | Supplying and fixing Cuddapa Slab for cupboard shelf |
| 41 | Providing cupboard shutter with frame using termite / water proof ply wood of 19mm thick over which laminated sheetof 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shtter using fevicol along with necessary furniture fittings such as hydralic hinges tower bolt handles multi purpose locks etc as directedby the departmental officers the design pattern waterproof plywood laminate sheet and other materials should be got approved fromthe EE before useon (M0390) |
| 42 | Supplying and fixing PVC Rain water down fall pipes of following dia meter etc |
| 43 | Sub Estimate For Electrification |
| 44 | Wiring with 2 x 2.5 Sq.mm PVC uncheated SC alu.cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with T.W. Switch box in flush with wall, covered with nylon sheet of 3mm thick with painting of suitable colour for open PVC light point SD 20 - Light point Fanpoint SD20 |
| 45 | Supply and fixing of 4-18W LED Tube with fitting inclusive of all charges |
| 46 | Wiring with 2 x 1.5 Sq.mm PVC uncheated SC alu.cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with T.W. Switch box in flush with wall, covered with nylon sheet of 3mm thick with painting of suitable colour for open PVC Fan point SD 20Wiring with 2 x 2.5 Sq.mm PVC uncheated SC alu.cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm T.W. switch box in flush with wall, covered with nylon sheet of 3mm thick 5 Amps 3 pin non - interlocking C.S. Plug top with painting of suitable colour for open PVC plug point.- SD -36. |
| 47 | Supply and Fixing of 1200mm Sweep ac ceiling fan complete with stepped electronic regulator with 300mm down rod on the existing clamp complete. SD-110 (1200mm) |
| 48 | Supply and fixing of watertight bulk head fitting with guard suitable for incandencent lamp and 60W Bulb SD NO 84 |
| 49 | Supply and run of 2of 1.50sqmm polythene insulted pvc sheathed heavy duty sc copper conductor of 1100 v Grade on7/20 GI Bearner wire for service connection mains SD NO64 |
| 50 | Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD-129 |
| 51 | Supply and run of 2 x4 Sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in 25mm dia GI Pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and and supports for mains SD-69 |
| 52 | Supply and fixing of 16 Amps DPIC MCB switch of 500V with metal clad with fuse and neutal SD144 |
| 53 | SD139 |
| 54 | SD 234 |
| 55 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender