Tender For Providing Treated Water Pipeline For The Use Of Treated/ Recycled Water From Stp For Irrigation & Flushing (3Rd Phase) At Iit Roorkee.
Tender Value
70.12 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
17 days left
EMD
1.41 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Treated Water Pipeline For The Use Of Treated/ Recycled Water From Stp For Irrigation & Flushing (3Rd Phase) At Iit Roorkee.
BOQ
| Sl. No. | Item Description |
| 1 | Cartage of Lime, Murom, cum building rubbish by Manual Labour / Mechanical Transport including loading, unloading and stacking for lead less than 0.50 KM. |
| 2 | Earth work in all kind of soil excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 3 | Providing and laying in position cement concrete of 1:2:4 specified grade excluding the cost of centring and shuttering. |
| 4 | Providing and laying in position cement concrete of 1:5:10 specified grade excluding the cost of cantering and shuttering. |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 6 | Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement: 6 coarse sand) |
| 7 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 8 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate. |
| 9 | 12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) |
| 10 | Finishing walls with water proofing cement paint of required shade, New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, Two or more coats on new work. |
| 12 | Lettering with black Japan paint of approved brand and manufacture. |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. |
| 15 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 16 | Providing and laying 60mm thick factory-made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 17 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 18 | Making connection of G.I. / CPVC/ UPVC/ PPR etc. distribution branch with main of 50 to 80 mm nominal bore sizes by providing and fixing tee, band etc. including cutting and threading the pipe etc. complete |
| 19 | Providing and fixing gun-metal gate valve 20mm dia with C. I. wheel of approved quality (screwed end). |
| 20 | Providing and fixing gun-metal gate valve 25mm dia with C.I. wheel of approved quality (screwed end). |
| 21 | Supply and fixing of forged Brass Ball valve, 50 mm dia, good quality, equivalent to Zoloto make. |
| 22 | Providing and fixing ball valve (CPVC) of approved quality, high or low pressure, with plastic floats complete 50 mm nominal bor complete in all respect. |
| 23 | Supply and fixing of C.I. body wafer type Butterfly valve 50 mm with S.S. disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation. |
| 24 | Supply and fixing of C.I. body wafer type Butterfly valve 100 mm with S.S. disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation |
| 25 | Supply and fixing of C.I. body wafer type Butterfly valve 150 mm with S.S. disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation. |
| 26 | Supply and fixing of C.I. body wafer type Butterfly valve 200 mm with S.S. disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation. |
| 27 | Providing, laying, testing & commissioning of 'B' class heavy duty 100 mm dia G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required |
| 28 | Providing, laying, testing & commissioning of 'C' class heavy duty 100 mm dia MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: |
| 29 | Providing, laying, testing & commissioning of 'C' class heavy duty 150 mm dia MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: |
| 30 | Providing, laying, testing & commissioning of 'C' class heavy duty 250 mm dia (wall thickness 6.3 mm) MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: |
| 31 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non-rising spindle, bronze/gunmetal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of 150 mm dia sizes as required : |
| 32 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non-rising spindle, bronze/gunmetal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of 250 mm dia sizes as required: |
| 33 | Providing, installation, testing and commissioning of a non-return valve of 150 mm Dia sizes confirming to IS:5312, complete with rubber gasket, GI bolts, nuts, washers etc. as required: |
| 34 | Providing, installation, testing and commissioning of non-return valve of 100 mm Dia sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required: |
| 35 | cutting & making water connection form existing main 100 mm dia to 160 m dia & reconnected to it as the same I/C required fittings labour, T& P etc. As for proper completion of the work. |
| 36 | cutting & making water connection from existing main 200 mm dia to 300m dia & reconnected to it as the same I/C required fittings, labour, T& P etc. As for proper completion of the work. |
| 37 | Horizontal Boring in Road crossing/ floor etc upto 200 mm diameter for laying Cable/ Pipe etc, in all soils except ordinary hard rocks requiring blasting, including making the required trench on road side and refilling the same as it is, if required after the road crossing and complete with laying of pipe/cable (excluding cost of pipe or cable) as required. |
| 38 | P/F G.I. Pipe 20 mm dia 'B' class ISI mark completed with G.I. fittings and clamp i/c cutting and making good the wall etc. |
| 39 | P/F G.I. Pipe 25 mm dia 'B' class ISI mark completed with G.I. fittings and clamp i/c cutting and making good the wall etc. |
| 40 | Providing and fixing 160 mm dia Unplasticized Polyvinyl Chloride (UPVC) pipes, with 10 KGF/sqcm, having thermal stability for cold water supply including all UPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 41 | Providing and fixing 100-110 mm nominal dia Unplasticized Polyvinyl Chloride (UPVC) pipes, with 10 KGF/sqcm, having thermal stability for cold water supply including all UPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 42 | Do -- but 50 mm dia UPVC pipe complete in all respect. |
| 43 | Supply of Electromagnetic type water flow meter compact type with local display, size 150 mm ISO certified compliance with following technical parameters and compatible for SCADA.Electro-magnetic Flow Meter of Line size 150 NBAccuracy (+/-) 0.5%Type: Integrated, Service: Potable waterService: Potable waterArea of classification - Safe AreaBody material: Carbon steel, Liner Material: PTFE, Electrode material- SS316LSignal output 4-20 mA/plusPower supply: 24 V DC (20-36V DC) + Battery power supplyCommunication: RS 485 / HARTSensor grounding: Grounding electrodeConnection: A15: ANSI 150 # FlangeProgrammable for Local DisplayMedium Temperature- (-20) to (+120) Deg C.Velocity- 0.3 to 10 m/sEnvironmental protection: IP65/IP67Consumed power < 20wCertificate ISORepeatability Error (+/-) 0.1%. |
| 44 | SITC of open well Submersible pump set, cold and clear water against a total head of approximately 5 mtr with motor of 20 HP suitable to operate on 415±10% Volts, 3 phase, 50 Hz AC supply complete. Make: equivalent to Jos2040+, Kirloskar. |
| 45 | SITC of 3 phase,415 V, 50 Hz, 20 HP FASD (with wideband coil) Starter. Make: Equivaled to MU-G20W FASD Stater, HSN Code 8536 L&T Agri. Including connection wire etc as required Complete in all respect. |
| 46 | S/F of M.S. clamp (round shape) made with 65 x 6 mm strip with 25 mm dia M.S. socket heavy duty welded for water connection from M.S./ G.I./ C.I./ CPVC/ UPVC/ PPR Pipe of 80 to 110 mm dia pipe including of required Nut bolt, rubber insertion, packing etc. Complete with fixing and connection etc as required. |
| 47 | S/F of M.S. clamp (round shape) made with 65 x 6 mm strip with 25 mm dia M.S. socket heavy duty welded for water connection from M.S./ G.I./ C.I./ CPVC/ UPVC/ PPR Pipe of 150 to 250 mm dia pipe including of required Nut bolt, rubber insertion, packing etc. Complete with fixing and connection etc as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender