Tender For Day To Day Civil Maintenance Of Different T.E Of Sanchar Parisar C Us, Main T.E & Old Trunk Exchange C Us, Adalatganj And Kidwaipuri Quarters Under Jurisdiction Of Bsnl Civil Sub Division Sanchar Sadan Of The Period For One (01) Year (Sess
Tender Value
5.71 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
3 days left
EMD
11422
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Civil Maintenance Of Different T.E Of Sanchar Parisar C Us, Main T.E & Old Trunk Exchange C Us, Adalatganj And Kidwaipuri Quarters Under Jurisdiction Of Bsnl Civil Sub Division Sanchar Sadan Of The Period For One (01) Year (Session 2026-27).
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : (a) Of area 3 sq. metres and below |
| 2 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: (a) Of area 3 sq. metres and below |
| 3 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : (a) 15 mm to 40 mm nominal bore |
| 4 | (b) Above 40 mm nominal bore |
| 5 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). (a) Sal wood |
| 6 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 7 | b) 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. |
| 8 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : a) 20 mm dia (heavy type) |
| 9 | b) 25 mm dia (heavy type) |
| 10 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. A) With 2nd class teak wood beading 62X19 mm. |
| 11 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : a) 300x16 mm |
| 12 | b) 250x16 mm |
| 13 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : a) 250x10 mm |
| 14 | b) 200x10 mm |
| 15 | c) 150x10 mm |
| 16 | d) 100x10 mm |
| 17 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : a) 125 mm |
| 18 | b) 100 mm |
| 19 | c) 75 mm |
| 20 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 21 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : a) 300x16 mm |
| 22 | b) 250x16 mm |
| 23 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : a) 250x10 mm |
| 24 | b) 150x10 mm |
| 25 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : a) 125 mm |
| 26 | b) 100 mm |
| 27 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. A) Twin rubber stopper |
| 28 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 29 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. a) 30 mm thick plain PVC door shutters. |
| 30 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): a) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 31 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. (a) 75 mm diameter |
| 32 | b) 110 mm diameter |
| 33 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. i) Single tee with door (a) 75x75x75 mm |
| 34 | b) 110x110x110 mm |
| 35 | (ii) Single tee without door (a) 75x75x75 mm |
| 36 | b) 110x110x110 mm |
| 37 | (iii) Bend 87.5° (a) 75 mm bend |
| 38 | b) 110 mm bend |
| 39 | (iv) Shoe (Plain) (a) 75 mm Shoe |
| 40 | b) 110 mm Shoe |
| 41 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 42 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 43 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 44 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 45 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 46 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (a) Kitchen sink with drain board (i) 510x1040 mm bowl depth 250 mm. |
| 47 | b) Kitchen sink without drain board (i) 610x510 mm bowl depth 200 mm. |
| 48 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : (a) Orissa pattern W.C. pan of size 580x440 mm |
| 49 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 50 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. A) 10 litre capacity - White |
| 51 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : a) White solid plastic seat with lid |
| 52 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 53 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. A) Flexible pipe (i) 32 mm dia |
| 54 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 55 | Providing and fixing PVC R/W pipe floor Trap of P or S type.A) 110 mm |
| 56 | b) 75 mm |
| 57 | Providing and fixing PTMT grating of approved quality and colour. A) Circular type. (i) 100 mm nominal dia. |
| 58 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 59 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. A) Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 60 | b) Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. |
| 61 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 62 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 63 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. (A) 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 64 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps . This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall a) 15 mm nominal outer dia. Pipes. |
| 65 | b) 20 mm nominal outer dia. Pipes. |
| 66 | c) 25 mm nominal outer dia .Pipes. |
| 67 | d) 32 mm nominal outer dia. Pipes. |
| 68 | e) 40 mm nominal outer dia. Pipes. |
| 69 | f) 50 mm nominal outer dia. Pipes. |
| 70 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. a) 15 mm nominal outer dia .Pipes. |
| 71 | b) 20 mm nominal outer dia .Pipes. |
| 72 | c) 25 mm nominal outer dia .Pipes. |
| 73 | d) 32 mm nominal outer dia .Pipes. |
| 74 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work a) 20 mm nominal outer dia. Pipes. |
| 75 | b) 25 mm nominal outer dia. Pipes. |
| 76 | c) 32 mm nominal outer dia. Pipes. |
| 77 | d) 40 mm nominal outer dia. Pipes. |
| 78 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. A) 15 mm dia. nominal bore |
| 79 | b) 20 mm dia. nominal bore |
| 80 | c) 25 mm dia. nominal bore |
| 81 | d) 32 mm dia. nominal bore |
| 82 | e) 40 mm dia. nominal bore |
| 83 | f) 50 mm dia. nominal bore |
| 84 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work a) 15 mm dia. nominal bore |
| 85 | b) 20 mm dia. nominal bore |
| 86 | c) 25 mm dia. nominal bore |
| 87 | d) 32 mm dia. nominal bore |
| 88 | e) 40 mm dia. nominal bore |
| 89 | f) 50 mm dia. nominal bore |
| 90 | g) 65 mm dia. nominal bore |
| 91 | h) 80 mm dia. nominal bore |
| 92 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : a) 25 mm nominal bore |
| 93 | b) 20 mm nominal bore |
| 94 | c) 32 mm nominal bore. |
| 95 | d) 40 mm nominal bore |
| 96 | e) 50 mm nominal bore |
| 97 | f) 75 mm nominal bore |
| 98 | Providing and fixing uplasticised PVC connection pipe with brass unions : a) 45 cm length (a) 15 mm nominal bore |
| 99 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever requireda) 15 mm nominal bore. |
| 100 | b) 20 mm nominal bore. |
| 101 | c) 25 mm nominal bore. |
| 102 | d) 32 mm nominal bore. |
| 103 | e) 40 mm nominal bore. |
| 104 | f) 50 mm nominal bore. |
| 105 | g) 65 mm nominal bore. |
| 106 | h) 80 mm nominal bore. |
| 107 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 108 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: a) 15 mm nominal bore. |
| 109 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. A) 15 mm nominal bore. |
| 110 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.A) 15 mm nominal bore |
| 111 | Providing and fixing PTMT bib cock of approved quality and colour. A) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 112 | Providing and fixing PTMT stop cock of approved quality and colour. A) 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 113 | Providing and fixing PTMT pillar cock of approved quality and colour . A) 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 114 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. A) 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. |
| 115 | b) 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. |
| 116 | c) 25 mm nominal bore, 152 mm long. Weighing not less than 440 gms. |
| 117 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 118 | Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40 gms. |
| 119 | Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms. |
| 120 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 121 | Cleaning of septic Tank including disposal of sludge in municipal approved dumping ground by means of mechanical transport including using disinfection complete as per direction and satisfaction of Engineer-in-charge. A) Normal size |
| 122 | b) Big size |
| 123 | Cleaning of open surface drain size up to 45 cm and depth up to 450 mm i/c disposal of rubbish/ garbage all types of waste material up to approved municipal dumping yard i/c all lead and lift involved etc all complete as per direction of E.I.C i/c sprinkling of bleaching powder etc complete . |
| 124 | Cleaning of manhole/chamber of all sizes by roding with bamboo Stick including disposal of sludge in municipal approved dumping ground including all leads and lift involved using disinfection complete as per direction and satisfaction of Engineer-in-charge. |
| 125 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial de-silting of manholes and de-chocking of sewer lines. De-chocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth. |
| 126 | Providing and fixing single bamboo scaffolding for day to day civil maintenance work. Note:-No. of location shall be measured for payment purpose.A) Up to G+1 storey. |
| 127 | b) Up to G+2 storey. |
| 128 | c) Up to G+3 storey |
| 129 | d) Up to G+4 storey. |
| 130 | e) Up to G+5 storey. |
| 131 | Repairing of Aluminium door shutter by removing and refixing the same for replacing of hinges or Al section/parts etc. all complete as per direction of Engineer-in-charge. A) Up to 3.00 sqm |
| 132 | b) Beyond 3.00 sqm |
| 133 | Cutting of big tree up to 3 m height etc. and applying chemical on its root etc. all complete as per direction of Engineer-in-charge. A) From ground surface |
| 134 | b) From external wall up to G+1 storey |
| 135 | c) From external wall up to G+2 storey |
| 136 | d) From external wall up to G+3 storey |
| 137 | e) From external wall up to G+4 storey |
| 138 | f) At terrace |
| 139 | g) From external wall up to G+5 storey |
| 140 | Cutting of small tree up to 1 m height etc. and applying chemical on its root etc. all complete as per direction of Engineer-in-charge. A) From ground surface |
| 141 | b) From external wall up to G+1 storey |
| 142 | c) From external wall up to G+2 storey |
| 143 | d) From external wall up to G+3 storey |
| 144 | e) From external wall up to G+4 storey |
| 145 | f) At terrace |
| 146 | g) From external wall up to G+5 storey |
| 147 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m. A) All kinds of soil. |
| 148 | Cleaning of whole terrace by brooming, spade or hoe, garbage hold container, collecting of unserviceable scrap material lying in the terrace at one place including shifting of gabage from terrace to ground floor etc. all complete as per direction of Engineer-in-charge. Payment will be made after cleaning of whole terrace. Nothing extra shall be made for payment purpose.a) Terrace of Sanchar Sadan |
| 149 | b) Terrace of CTO Building mobile section side |
| 150 | c) Terrace of CTO Building ETR side |
| 151 | d) Terrace of CTTTC Bldg. |
| 152 | e) Terrace of Trunk Exchange |
| 153 | f) Terrace of Main Exchange |
| 154 | g) Pump room terrace in Sanchar Parisar campus |
| 155 | h) Security room 1&2 terrace in Sanchar Parisar campus |
| 156 | i) Substation room terrace in Main Exchange campus |
| 157 | j) Pump room terrace in Main Exchange campus |
| 158 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. A) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 159 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 160 | Centering and shuttering including strutting, propping etc. and removal of form for : a) Suspended floors, roofs, landings, balconies and access platform |
| 161 | Providing and fixing C.P. brass angle cock of approved quality. A) 15mm nominal bore |
| 162 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. A) 15 mm nominal bore |
| 163 | b) 20 mm nominal bore |
| 164 | c) 25 mm nominal bore |
| 165 | d) 32 mm nominal bore |
| 166 | e) 40 mm nominal bore |
| 167 | f) 50 mm nominal bore |
| 168 | Providing and fixing on wall face unplasticised Rigid PVC pipes fittings of approved quality. A) 25 mm nominal bore Elbow |
| 169 | b) 32 mm nominal bore Elbow |
| 170 | c) 40 mm nominal bore Elbow |
| 171 | d) 50 mm nominal bore Elbow |
| 172 | Providing and fixing on wall face unplasticised Rigid PVC pipes of approved quality. A) 25 mm size nominal bore. |
| 173 | b) 32 mm size nominal bore |
| 174 | c) 40 mm size nominal bore |
| 175 | d) 50 mm size nominal bore |
| 176 | Providing and fixing of CP brass of hand shower in European pan. |
| 177 | Providing and fixing of CP brass two way Bib Cock for fixing of hand shower in European pana) 15 mm size nominal bore |
| 178 | Repairing of following water supply and sanitary items below by necessary tools for proper functioning:- a) Flushing Cistern |
| 179 | b) CP or PTMT fittings such as Bib cock, Pillar Cock etc. |
| 180 | c) Urinal basin |
| 181 | Providing and fixing of plain or brass threaded fittings of CPVC Pipe. (a) M.T (i) 15 mm size nominal bore |
| 182 | ii) 20 mm size nominal bore |
| 183 | iii) 25 mm size nominal bore |
| 184 | iv) 32 mm size nominal bore |
| 185 | v) 40 mm size nominal bore |
| 186 | vi) 50 mm size nominal bore |
| 187 | vii) 62.50 mm nominal bore |
| 188 | viii) 75 mm nominal bore |
| 189 | b) F.T (i) 15 mm size nominal bore |
| 190 | ii) 20 mm size nominal bore |
| 191 | iii) 25 mm size nominal bore |
| 192 | iv) 32 mm size nominal bore |
| 193 | v) 40 mm size nominal bore |
| 194 | vi) 50 mm size nominal bore |
| 195 | vii) 62.50 mm nominal bore |
| 196 | viii) 75 mm nominal bore |
| 197 | C) Reducer socket (i) 20 to 15 mm size nominal bore |
| 198 | ii) 25 to 20 mm size nominal bore |
| 199 | (iii) 32 to 25 mm size nominal bore |
| 200 | (iv) 40 to 32 mm size nominal bore |
| 201 | (v) 50 to 40 mm size nominal bore |
| 202 | (d) Plain Elbow 90 degree (i) 15 mm size nominal bore |
| 203 | (ii) 20 mm size nominal bore |
| 204 | (iii) 25 mm size nominal bore |
| 205 | (iv) 32 mm size nominal bore |
| 206 | (v) 40 mm size nominal bore |
| 207 | (vi) 50 mm size nominal bore |
| 208 | e) CPVC brass Elbow 90 degree (i) 15 mm size nominal bore |
| 209 | (ii) 20 mm size nominal bore |
| 210 | (iii) 25 mm size nominal bore |
| 211 | (iv) 32 mm size nominal bore |
| 212 | (v) 40 mm size nominal bore |
| 213 | (vi) 50 mm size nominal bore |
| 214 | (vii) 20 to 15 mm size nominal bore |
| 215 | (viii) 25 to 20 mm size nominal bore |
| 216 | Credit of following items/materials:- (a) 15 mm dia. nominal bore |
| 217 | b) 25 mm dia. nominal bore |
| 218 | c) 32 mm dia. nominal bore |
| 219 | d) 40 mm size nominal bore |
| 220 | e) 50 mm dia. nominal bore |
| 221 | f) Aluminium door |
| 222 | g) Steel door/windows and their fittings |
| 223 | h) Unserviceable wooden door/window with or without frame. |
| 224 | i) Al door /window fittings |
| 225 | j) M.S door/window fittings |
| 226 | k) PTMT fittings such as Bib cock, stop cock etc. |
| 227 | l) CP brass bib cock, pillar cock etc. |
| 228 | m) G.I pipe fittings of various sizes such as 15,20,25,32,40,50 mm. |
| 229 | P/F wash basin mixer 2 in 1 of approved quality |
| 230 | P/F wall mixer 3 in 1 of approved quality |
| 231 | P/F Spider of 15 mm nominal outer dia. of approved quality |
| 232 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 233 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. |
| 234 | Providing and fixing CPVC gate valve as approved quality as per direction and satisfaction of Engineer-in-charge. (a) 15 mm nominal bore |
| 235 | b) 20 mm nominal bore |
| 236 | c) 25 mm nominal bore |
| 237 | d) 32 mm nominal bore |
| 238 | e) 40 mm nominal bore |
| 239 | f) 50 mm nominal bore |
| 240 | Providing and fixing CPVC union in G.I pipe using CPVC solvent etc. all complete as per direction and satisfaction of Engineer-in-charge. (a) 15 mm nominal bore |
| 241 | b) 20 mm nominal bvore |
| 242 | c) 25 mm nominal bore |
| 243 | d) 32 mm nominal bore |
| 244 | e) 40 mm nominal bore |
| 245 | f) 50 mm nominal bore |
| 246 | Providing and fixing CP brass Pillar cock of approved qualitya) 15 mm nominal bore |
| 247 | Providing and fixing of plain or brass threaded fittings of CP. (a) Nipple 15 mm dia. nominal bore (i) 2 inch length |
| 248 | (ii) 3 inch length |
| 249 | b) 20 mm dia. nominal bore (i) 2 inch length |
| 250 | (ii) 3 inch length |
| 251 | c) Reducer socket 20x15 mm nominal bore |
| 252 | (d) Elbow (i) 15 mm dia. nominal bore |
| 253 | (ii) 20 mm dia. nominal bore |
| 254 | (iii) 20x15 mm nominal bore |
| 255 | d) Cap |
| 256 | Repairing of Aluminium sliding window shutter by removing and refixing the same for replacing of sliding wheel or Al section/parts etc. all complete as per direction of Engineer-in-charge.A) Up to 3.00 sqm |
| 257 | b) Beyond 3.00 sqm |
| 258 | Labour supplying for work which are not covered under these items day to day maintenance work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender