Tender For Renovation Of Lobby Including Staircase At 2Nd, 3Rd, 4Th And Top Floor Of Corporate Office Building, Neepco, Shillong.
Tender Value
44.61 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
18 days left
EMD
89000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Lobby Including Staircase At 2Nd, 3Rd, 4Th And Top Floor Of Corporate Office Building, Neepco, Shillong.
BOQ
| Sl. No. | Item Description |
| 1 | Civil works |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking materials within 50 metres lead. A) For thickness of tiles above 25 mm and upto 40 mm. |
| 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to dumping ground within 50 metres lead. |
| 4 | Dismantling and stacking within 50 metres lead, fencing posts of struts including all earth work and dismantling of concrete etc. in base of: a) T or L iron or pipe. |
| 5 | Dismantling wooden boarding in lining of walls and partitions excluding supporting members but including stacking within 50 meters lead: c) Thickness above 25mm up to 40mm. |
| 6 | Disposal of surplus earth/unserviceable materials from the work site including loading and unloading complete as directed. a) First 5km |
| 7 | 20mm cement plaster of mix: a) 1:4 (1 cement: 4 coarse sand) |
| 8 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cemet and matching pigments etc. complete. C) Size of yiles 800 x 800 mm |
| 9 | Providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge. |
| 10 | Providing and fixing tiled false ceiling of specified materials of size 595 x 595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main ‘T’ of size 24 x 38 mm made from 0.30 m thick (minimum) sheet, spaced between main ‘T’ at 600 mm centre to centre to form a grid of 1200 x 600 mm and secondary cross ‘T’ of length 600 mm and size 24 x 25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 x 600 mm panel to form grid of 600 x 600 mm and wall angle of size 24 x 24 x 0.3 mm and laying false ceiling/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main ‘T’ runners to be suspended from ceiling with 12.5 mm dia and 50 mm long dash fasteners 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.c) 12.5 mm thick square edge PVC Laminated Gypsem tile of size 595 x 595 mm, made of gypsum plasterboard, manufactured from natural gypsum as per IS: 2095 part I and laminated with 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalised polyester on the back side with edges sealed with the face side PVC film which goes around and wraps the edges and bonded to the edges and the back side metalised polyester film so a to make the tile a completely sealed unit. |
| 11 | Dismantling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 metres lead of b) Asbestos cement sheet |
| 12 | Supplying, fitting and fixing PVC louvers with SS Clip as required on the top of block board including providing corner edge beading (block board and wooden beading to be paid separately) as directed by the Engineer-in-charge. |
| 13 | Finishing with Deluxe Multi surface paint system for interiors and exteriors including scaffolding: a) Two or more coats applied on walls @ 1.25 ltr/10 sqm over excluding priming coat. |
| 14 | Extra for pre finished nosing to treads of steps of marble stone. |
| 15 | Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary accessories & stainless steel dash fasteners, stain steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in0charge, (for payment purpose only weight of stainless steel members shall be considered). |
| 16 | Plain cement concrete works in foundation bed for footing steps, walls, brick works etc. below plinth level as directed and specified including dewatering if necessary and curing complete (shuttering where necessary shall be measured and paid separately). 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 17 | Removing existing white or colour wash on wall surfaces by steel wire brushing and/or scraping, and papering and preparing the surfaces smooth including necessary repairs to scratches complete. |
| 18 | Electrical |
| 19 | Wiring in looping in system with 1.5 sqmm DGSD approved 250 grade single core multistrand conductor TRS or PVC cable using heavy gauge of 16 SWG 19mm dia rigid PVC pipe including supplying & fitting conduit bends, tees, joints, boxes, etc. as necessary with M.S or wooden box for housing switches sockets fan regulator & bell push etc. covered with 3mm thick transparent perspire sheet cover duly painted from inside to match the colour of the wall or as directed by the Engineer in charge complete with 5 Amp Modular switch, ceiling rose etc. |
| 20 | a) Long point upto 10 mts |
| 21 | b) Medium point upto 6 mts |
| 22 | c) Short point upto 3 mts |
| 23 | Wiring as in item No.11 above to Light Plug Point when fixed elsewhere with continuous earth wire complete. |
| 24 | a) Long point upto 10 mts |
| 25 | b) Medium point upto 6 mts |
| 26 | Wiring as in item No.11 above for Stair case/2 way Switch Wiring a) Long point upto 10 mts |
| 27 | Drawing Main and Sub-Main Line wiring as in item No.11 above with TRS or PVC Single Core Multistrand 250V Grade Copper Conductor Cable. a) With 2x2.5 mm2 copper wire |
| 28 | Supplying, fitting and fixing of LED PANEL CEILING LIGHTING concealed with all necessary accessories. c) 2x2 (595x595x70) mm recess mounting luminaire suitable for ceiling. ii) 34W |
| 29 | Supplying, fitting and fixing of LED DOWNLIGHTS surface or wall mounted with all necessary accessories. c) Recess mounted downlighter with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integrated driver. i) 10 W Ceiling cutout: dia 90 mm, height 90 mm |
| 30 | iv) 18 W Ceiling cutout: dia 175 mm, height 92 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender