Tender For Construction Of Female Toilet Child Feeding Room And Child Safe Washroom Civil Court Pakur
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
5 days left
EMD
19818
Bank guarantee accepted
Document Fee
1250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pakur → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Female Toilet Child Feeding Room And Child Safe Washroom Civil Court Pakur
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 2 | Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 3 | Providing coarse clean sand filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm. Thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 4 | Providing designation 75 B one brick flat soling joints filled with local sand including cost ofWatering, taxes, royalty, all complete as per building specification and direction of E/I. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing designation 75B Brick work in C.M.(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints cost of screening carriage of materials, raking out joints to 15mm. depth , curing , taxes and royalty all complete as per building specification and direction of E/I. |
| 8 | Earth work in filling in foundation trenches and plinth in layers not exceeding 150mm. Thick well watered, rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 Mtr . and lift of 1.5 Mtr. All complete as per building specification and direction of E/I. |
| 9 | Providing designation 75B Brick work in C.M.(1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints cost of screening, carriage of materials, scaffolding, raking out joints to 15mm. depth , curing , taxes and royalty all complete as per building specification and direction of E/I. |
| 10 | Providing 125mm.thick reinforced designation 75A brick work in C.M. (1:4)in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including cost of screening , carriage of materials ,scaffolding , raking out joints to 15mm. depth , curing , taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. |
| 11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 12 | Reinforcement Concrete Work in Beams, Suspended, roofs having slope up to 15'' landings, balconies, shelvs, chajjas, lintels, bands, plain window sills -do- etc. |
| 13 | Providing 19mm water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5 0/0 cicco or any other approved water proofing compound (By weight) including cost of carriage, screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 14 | Providing TMT steel reinforcement of 8 mm dia rods as per approved desing and drawing including carriage of M.S. bars to work site. cutting, bending and binding with nnealedwire with cost ofwire, removal of rust, placing the rods in position all complete as per building specifications and direction of E/I. (Taking 8mm TMT Coil Fe 500). 8mm |
| 15 | Centering and shuttering including strutting Propping etc and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 16 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 17 | Suspended floors, roofs, landings, balconies and access platform |
| 18 | Providing 6mm. cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of carriage, screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 19 | Providing 12mm. cement plaster (1:6) with clean coarse sand of F.M. 1.5 including cost of carriage, screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 20 | Providing 12mm. cement plaster (1:3) with punning with clean coarse sand of F.M. 1.5 including cost of carriage, screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 21 | Supplying, fitting and fixing good quality, well dressed and well seasoned local wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I. |
| 22 | Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 23 | Supplying, fitting and fixing M.S. grill made of 20mm x 6mm M.S. flat asper approved desing and drawing, properly fabricated with joints continuous fillet, welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. |
| 24 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 25 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of (big series)frame 67 x 50 mm & sash 46 x 62 mm both having wallthickness of 2.3 ± 0.2 mm and single glazing bead / doubleglazing bead of appropriate dimension . (Area of windowabove 1.75 sqm upto 2.50 sqm). |
| 26 | Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer’s specification and direction of Engineer-in-charge. Providing and fixing 37 mm thick factory made PVC door shutter |
| 27 | 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer’s specification and direction of Engineer-in-charge. Non decorative finish (matt finish) Decorative finish (wood grained finish |
| 28 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm . |
| 29 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent |
| 30 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) |
| 31 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. |
| 32 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 33 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. |
| 34 | Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) |
| 35 | Providing 250mm wide brick drain in cement mortar(1:6) with av .150 mm clear depth and 250 mm apron including cost of E/W involved, with 75mm cement concrete (1:4:8) over one brick flat soling designation 100A brick in proper grade and slope at the base, the drain duly plastered in C.M. (1:3) with punning over exposed surface. All complete as per building specifications and direction of E/I |
| 36 | Carriage of material Cost - (i) Bricks (1 K+ 7P) |
| 37 | (ii) Sand (10 km) |
| 38 | (iii) S chips (22 Km) |
| 39 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5 |
| 40 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 41 | Supplying, fitting and fixing 40mm high vitreous white glazed earthen E.W.C. with 'P' trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15liters C.I. mosquito proof low down flushing cistern of of approved….do.. E/I with 'P' trap10 Lit. low level PVC cistern |
| 42 | Supplying, fitting and fixing vitreous white glazed earthenware I.W.C of Parry, Hindustan or any other I.S.S approved make with 100 mm H.C.I 'P' trap, 15 litres (high level) C.I pull and let go flushings cistern-1 12.5 liter low down C.I mosquito Proof flushing cistern of Nomus or other I.S.S equivalent make, Complete with all fittings, C.I or R.S bracket, 32 mm alkathene/ P.V.C telescopic flush pipe about 2 meter long with one brass coupling and clamps. C.I chain and pull including supplying and fixing a pair of vitreous white glazed earthen ware foot rest to be fixed in floor 15 mm C.I body brass spindle stop cock of weight not less than 50 gms, 15mm P.V.C connection pipe 450 mm long and than 15 mm P.V.C connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I (B)510mm long With 10 litre low level P.V.C. cistern |
| 43 | Supplying fitting and fixing vitrious white glazed earthenware Indian squating type 600mmx350mm Urinal plate of perry hindustan or any other Indian Standard as per do-- E/I |
| 44 | Supplying, fitting and fixing 550mmx400x400mm size vitreous white glazed earthan ware ware wash hand basin of ‘Parry’ or Hindustan or any other I.S.S approved make supported on painted C.I or R.S brackets 32mm C.P brass spindle stop cock of approved quality of weigth not less than 450 gms. 15mm P.V.C pipe 450 mm long with brass coupling 15mm dia C.P Brass pillar cock of approved quality weight not less than 350 gms 32 mm P.V.C waste pipe 750 mm long with brass coupling at noe end and making plumber joint etc. all complete as per specifications and direction of E/I |
| 45 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm Dia |
| 46 | 110 mm Dia |
| 47 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm |
| 48 | 110x110x110 mm |
| 49 | Bend 87.5° - 75 mm bend |
| 50 | 110 mm bend |
| 51 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes |
| 52 | 20 mm nominal dia Pipes |
| 53 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipe |
| 54 | 32 mm nominal dia Pipes |
| 55 | Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750mm deep 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:0 with 600x475mm G.I cover with frame (weight not less than 36kg) along with earth work in excavation and 80mm thick P.C.C (1:3:6) in foundation and refilling all complete as per specification and of E/I |
| 56 | Special type of C.P. Bath room fittings for V.I.P buildings (JAL, , Jaquar, marc or equipment make) (ISI Marked) (i)pillar cock (long neck) |
| 57 | bib cock long thread |
| 58 | Providing and fixing brass/C.I stop cock of approved quality all complete as per specifications and direction of E/I (A) BRASS STOP COCK 15mm dia |
| 59 | Supplying fitting and fixing the following items complete with all materials as per specifications and direction of E/I Mirror of 6 mm thick plate glass beveled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror 600mmx450mm |
| 60 | C.P. brass towel rail20mmx600mm with bracket container |
| 61 | C.P. brass liquid soap container |
| 62 | Wiring for light point/fan point /exhaust fan point/call bell point with 1.5 sq. mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular switch, modular plate, suitable G.I. Box etc are required. Group A |
| 63 | Wiring for Circuit/submain wiring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. (i) 2 x1.5sq.mm. + 1 x1.5sq.mm. earth wire |
| 64 | (ii) 2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire |
| 65 | S/F Modular Boxes, base & cover plate: Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required. (i) 1 or 2 Module (78mm x 78mm x 45mm) |
| 66 | (ii) 4/5 Module |
| 67 | (iii) 12 module (l35mm x 205mm x 60mm) |
| 68 | Supplying and fixing of following modular switch / soket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps, one way switch |
| 69 | 5/6 amps, 3 pin socket outlet |
| 70 | S/F Ceiling Rose: Supplying and fixing 2 pin 5 amp ceiling rose on the existing junction box/ wooen block including connection etc as required. Make :- Anchor / Kona / Kany |
| 71 | S/F Batten / Angle Holder: Supplying and fixing batten / angle holder including connection etc as required. |
| 72 | S/F HRC TYPE TP & N in Cubical Panel board :- Providing and fixing 63 amps TP & N disconnector fuse switch unit inside the exisiting panel board with ISI marked HRC fuses including holes in cubicle panel, making connections etc as required. |
| 73 | S/F S.P MCB DB :- Supplying and fixing following way, single pole and neutral sheet steel MCB distribution board 240 Volts on surface/recess, complete with tinned copper bus bar neutral bus bar, earth bar, din bar including powder Painted including earthing etc as required. (But without MCB/RCCB/ Isolator) 8 way single door |
| 74 | Suppling and fitting 10/12 watt LED Bulb fitting |
| 75 | Supply of Exhaust metal Fan: Supply and fitting of 230mm, 230V AC metal exhaust fan in the existing opening including making good the damage, connection testing, commissioning etc as required( Make- Polar/ Havells/Crompton) |
| 76 | Supply installation, testing and commissioning of following size ceiling fan 3 blades confirming to IS:2019 including wiring the down rods of standard length (upto 30cm) with 1.5sqmm .FR PVC insulated, copper wire suitable for 230v 50Hz, single phase supply etc. complete as required. S/F/F ceiling fan/mountain fan with complete job |
| 77 | Supping XLPE/PVC insulated aluminium conductor armoured cable 1100 V grade with ISI mark three core solid/standed aluminium conductor with 6 mm thick 25 mm width MS spacer with G.I. earth wire 6 sqmm complete in an approved manner as per is 7098 3.5 core 25 sqmm |
| 78 | GST @ 18% |
| 79 | LABOUR CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender