Tender For Diversion Of 11Kv Overhead Line Along The Dense Forest Area From Kuju New Siding To Pit Office Of Topa Project Along With Substation Related Work Near Samudaik Bhawan Of Topa Ocp Under Kuju Area.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Jul 2026
12 days left
EMD
94300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramgarh → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Diversion Of 11Kv Overhead Line Along The Dense Forest Area From Kuju New Siding To Pit Office Of Topa Project Along With Substation Related Work Near Samudaik Bhawan Of Topa Ocp Under Kuju Area.
BOQ
| Sl. No. | Item Description |
| 1 | A) Erection of 11KV Overhead line |
| 2 | Errection of steel tubular or rail pole strut in cement concrete 1:3:6 foundation including excavation and refilling and secured with holding clamps, bolts, nuts etc as req. Above 10.0 metre and upto 12.0 metre |
| 3 | Supplying & erection of stay set complete (galvanized) with 19/20 mm dia x 1.8 Mtr long stay rod anchor plate of size 45cm x 45cm x 7.5 mm thimble stay clamp turn buckle (20mm x 60cm) 7/4.00 mm dia G.I. wire and strain Insulator etc in cement concrete (1cement: 3coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including excavation & refilling etc. as required. |
| 4 | Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. |
| 5 | Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. |
| 6 | Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required . |
| 7 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required. |
| 8 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. |
| 9 | Supply of two lengths of channel iron 75mm x 40mm x 7.5Kg/mtr double pole cross arm for 3 wire OH Line conductors complete with though bolts & nuts for clamping to the poles 50mm x 6mm M.S. flats welded on one side the channel iron and with bolts & nuts on the otherside for lying cross arm together including drillin holes for insulators pins/fittings, bolts & nuts etc. and painting with primer and finish paint as required. |
| 10 | Erection of Angle iron/channel cross arm on woodeN/RCC/PCC/Steel tubular/Rail Poles etc as required. |
| 11 | Supply of 6 SWG Gi wire for earthing and cradling of O.H. Line. 30spanX50mX2NoX.192KgX1.05=604.80kg |
| 12 | Errcetion of GI wire 6 SWG including Binding |
| 13 | Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required. 14spanX50mX3NoX.394KgX1.05=827.40kg |
| 14 | Erection of ACSR conductor of 7/2.11 mm to 7/3.00 mm diameter andabove including binding etc. as required. Conductor weight =12SpanX50mX4Conductor)X1.05X.214kg/m = 539.28Kg |
| 15 | Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc.with charcoal/coke and salt as required. |
| 16 | Supply and fixing of single core 35 sq.mm Al cable |
| 17 | Supply and fixing of Al lugs 35 sqmm |
| 18 | Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required. |
| 19 | Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required. (1.5Km*3C*394Kg/Km*1.05+=2482.20kg) |
| 20 | Supply and fixing of 11KV grade DO fuse |
| 21 | Supply & Fixing of 11 KV grade Isolator 630Amp horizental type |
| 22 | B) Erection of 3.3KV OHL from Banwar substation to main sump |
| 23 | Errection of steel tubular or rail pole strut in cement concrete 1:3:6 foundation including excavation and refilling and secured with holding clamps, bolts, nuts etc as req. Above 10.0 metre and upto 12.0 metre |
| 24 | Supplying & erection of stay set complete (galvanized) with 19/20 mm dia x 1.8 Mtr long stay rod anchor plate of size 45cm x 45cm x 7.5 mm thimble stay clamp turn buckle (20mm x 60cm) 7/4.00 mm dia G.I. wire and strain Insulator etc in cement concrete (1cement: 3coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including excavation & refilling etc. as required. |
| 25 | Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. |
| 26 | Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. |
| 27 | Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required . |
| 28 | Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required . |
| 29 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required. |
| 30 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. |
| 31 | Supply of two lengths of channel iron 75mm x 40mm x 7.5Kg/mtr double pole cross arm for 3 wire OH Line conductors complete with though bolts & nuts for clamping to the poles 50mm x 6mm M.S. flats welded on one side the channel iron and with bolts & nuts on the otherside for lying cross arm together including drillin holes for insulators pins/fittings, bolts & nuts etc. and painting with primer and finish paint as required. |
| 32 | Erection of Angle iron/channel cross arm on woodeN/RCC/PCC/Steel tubular/Rail Poles etc as required. |
| 33 | Supply of 6 SWG Gi wire for earthing and cradling of O.H. Line. Cradling 10spanX5No.X50mX.192kg/mX1.05=504Kg Earth continuity 30spanX50mX2NoX.192KgX1.05=604.80kg Total=1108.80Kg |
| 34 | Errcetion of GI wire 6 SWG including Binding |
| 35 | Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required. 14spanX50mX3NoX.394KgX1.05=827.40kg |
| 36 | Erection of ACSR conductor of 7/2.11 mm to 7/3.00 mm diameter andabove including binding etc. as required. Conductor weight =12SpanX50mX4Conductor)X1.05X.214kg/m = 539.28Kg |
| 37 | Supply and errection of three piece non linear type resistor type lightening arrestor suitable for 3 wire 11 KV O.H. line with rated volt. 9 KV(rms0 with a nominal current rating of 5 KA and complete with galvanized clamping arrangement, GI, bolt, nuts, washers etc as req. |
| 38 | Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc.with charcoal/coke and salt as required. |
| 39 | Supply and fixing of single core 35 sq.mm Al cable |
| 40 | Supply and fixing of Al lugs 35 sqmm |
| 41 | Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required. |
| 42 | Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required. (2Km*3C*394Kg/Km*1.05=2482.2kg) |
| 43 | Supply and fixing of 11KV grade DO fuse |
| 44 | Supply & Fixing of 11 KV grade Isolator 630Amp horizental type |
| 45 | Supply & Fixing of GOAB 3.3KV grade horizental type 630A |
| 46 | C)Rearrangement of LT/HT Bus bar at SUBSTATION Near Samudaik Bhawan Topa |
| 47 | Supply and fixing of Local Remote control Switch with 2 NC + 2 NC |
| 48 | Providing and fixing of Akuminium Patti 50 mm X 12 mm 184 feet X 3.39 Kg./M = 311.88 Kg. + 5% wastage |
| 49 | Providing and fixing of Copper cable 12 core X 1.5 sq mm |
| 50 | Providing and fixing of Digital Amp./Volt Meter 96 X 96 X 43 mm |
| 51 | Providing and fixng of Fuse Base carrier with fuse |
| 52 | Supply and fixing of TNC switch with 1 NO + 1 NC |
| 53 | Providing and fixing of Indicating lamp 110 /220 V (R/Y/B) |
| 54 | Providing and fixing of Auxilary contact switch 110 V 4 NC+ 4 NC |
| 55 | Providing and fixingof Electronic Industrial Multi tone Hooter 220 V |
| 56 | Wiriing with materials as req. |
| 57 | Providing and fixing of Support Insulator 75 mm |
| 58 | Supply and fixing of post insulator |
| 59 | Providing and fixing of MCCB DTH 1250 A |
| 60 | Providing and fixing of MCCB DTH 800 A |
| 61 | GI Nut Bolt with Washer. |
| 62 | Foundation bolt MS for base (25mm dia x 3 feet length along with nut |
| 63 | Fabrication and erection work of iron and steel platform column, bracing housting, placing etc.Tower weight - 2774.68 Kg.Panel Box weight - 450 Kg. |
| 64 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil for earthing1 M X 1 M X 2.5 M X 6 Nos. |
| 65 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 66 | Cost of Single core 35 sq. mm Alluminium cable for Earth wire |
| 67 | Providing of Limit switch |
| 68 | Copper cable 2.5 sq.mm x 2 core |
| 69 | Auxilary contactor |
| 70 | D)Foundation of LT Switch |
| 71 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil 3 M X 2 M X 0.1X5Nos.=3cum |
| 72 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 0.1 M X 3 M X 2 MX5Nos. = 3 cum |
| 73 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)0.25 M X 1 M X 2 M X 2 wallx5Nos. = 5 cum0.25 M X 1 M X 3 M X 2 wallX5Nos. = 7.5 cum |
| 74 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement. 18 mm plaster1 M X 3 M X 2 wallx5Nos = 30 sqm1 M X 2 M X 2 wallX5Nos.=20 sqm |
| 75 | Providing and laying in position cement concrete of specified grade excluding the cost of contering and shuttering-All work up to plinth level: size Recycled concrete Aggregate (RCA)upto 25% 1:2:4(1 cement:2 coarse sand (zone- III)derived from natural sourses: 4 graded stone aggregate 20mm nominal size derived from natural sourses)0.15 M X 3 M X 2 MX5Nos. = 4.5 cum |
| 76 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender