Tender For maintenance and repair To Govt. Resdl Bldgs At Altinho. S.H Repair And Renovation To E- 19 Qtrs At Altinho, Panaji.
Tender Value
10.06 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
4 days left
EMD
20121
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance and repair To Govt. Resdl Bldgs At Altinho. S.H Repair And Renovation To E- 19 Qtrs At Altinho, Panaji.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm. |
| 2 | Removing old loose bottom or side cover of RCC slab beam columns etc. rubbing surface of concrete steel using wire brush and applying 2 coats of Alkaline rust converting primer (Feovert) after a waiting time of 6 hrs between coats and then applying another anti corrosive protective coating system ) for reinforcement bars (IPNet-RB) Conforms to IS-2770 Part-1 (Pull out Test) ASTM-3963-86 (Adhesion Test) and then applying concrete penetrating corrosion inhibitor (EPCO-KP100) and applying bonding new to old concrete (Epibond) Conforms to ASTM-C-882-87 and plastering on the fresh bond coat with Polymer Modified Mortar (Monobond) with 20mm C.M 1:3 and finishing coat of 6mm C.P 1:3 (1 Cement : 3 Sand ) incl. cost of transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent. |
| 3 | Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 4 | Taking out doors windows and clerestory windows shutters (steel or wood) including stacking within 50 mts. lead;Of area 3 sq.m. and below |
| 5 | Dismantling of existing G.I pipe including disposal of unserviceable material and stacking of serviceable materials .;Upto 20 mm nominal bore |
| 6 | Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement: 3 Coarse Sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 7 | Crack filler for plasters IPS cement sand screeds and non – structural cracks. Do Not open the cracks Clean the cracks so as to free them from oil dust loose particles etc. Moisten the surface with water Fill cracks with EPCO – ACR using spatula or a putty knife. While applying avoid formation of cavity or bubbles. After filling allow the surface to dry for at least 24 hours. Apply in layers at 24 hours interval. If the depth of the crack is more than 10mm. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalen. |
| 8 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead. |
| 9 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 10 | Providing and fixing 1st quality ceramic glazed wall tiles (Johnson Somany Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer-in-charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete.;Wall Ceramic Glazed Tiles : 300 x 600 |
| 11 | Providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson Somany Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc. complete;Light Shades |
| 12 | Providing and and laying vitrified floor tiles in different sizes of Johnson Somany Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc. complete;600x 600 mm Dark Shades |
| 13 | Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws.;Ornamental grill |
| 14 | Proving and fixing anodised alluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes transportation scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Window with two or three sliding shutters using 14.5/15 mm series shutters section.;Plain glass |
| 15 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes transportation scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Adjustable louvered windows.;Plain glass |
| 16 | Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section |
| 17 | FRP (Fiber Reinforced Polymer) Frames with Wood Finish Manufacture Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company.;Specified Cross Section;4\\" x 2\\" |
| 18 | Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door Shutter. Manufacture Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood moisture less than 17% wooden styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) and printed matt having wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade Block Board. The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 - 2015 certified factory. Accessories: i) S. S. Hinges 4\\" - 3 Nos ii) S. S. Latch - 1 No iii) Tower Bolt 5\\" - 2 Nos iv) Handle 5\\" - 2 Nos;Shutter Thickness;35mm |
| 19 | Providing woodwork in frames of doors windows clerestory windows trusses & other frames wrought framed and fixed in positon.;First class matti wood |
| 20 | Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors windows and clerestory window including anodized aluminium butt hinges with necessary screws:;Second class Indian teak wood |
| 21 | Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size.;40 x 3 mm flat iron hold fast 40 cm long |
| 22 | Providing and fixing chromium plated brass parliamentary hinges with necessary screws etc. complete;100 x 125 x 27 x 5 mm |
| 23 | Providing and fixing fly proof galvanized M.S. wire gauge of I.S. gauge designation 140 g. with wire of dia. 0.56 mm to windows and clerestory windows including 62 x 19 mm beading of second class Indian wood . |
| 24 | Providing and fixing chromium plated brass sliding door bolt with bolts nuts and screws etc. complete.;300 x 16 mm |
| 25 | Providing and fixing chromium plated brass tower (barrel type) with necessary screws etc. complete;300 x 16 x 5 mm |
| 26 | Providing and fixing chromium plated brass handle with necessary screws etc. complete;125 mm |
| 27 | Provided and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutters thickness complete. |
| 28 | Providing and fixing Stainless steel D type handles with necessary screws etc complete a) L 300mm/325mm x 22 to 25mm dia |
| 29 | Provided and fixing chromium plated brass 100 mm. mortice latch and a pair of levers and handles with necessary screws etc. complete (Indian make of approved quality). |
| 30 | 25 mm thick wooden shelves supported on 40 x 40 x 6 mm T or L iron brackets fixed at suitable distances but not exceeding 7 cm apart in 7.5 x 7.5 x 15 cm blocks of cement concrete mix 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm.nominal size) with;Second class Indian teak wood |
| 31 | Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete. |
| 32 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for wood work of approved brand & manufacture in all shades on new work to give an even shade. |
| 33 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 34 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. |
| 35 | Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. |
| 36 | Applying one coat of distemper primer of approved brand and manufacture on wall surface. |
| 37 | Distempering (one/ more coat) with oil bound washable distemper of approved brand and manufacture and of required shade on old work to give an even shade. |
| 38 | Deep penetrating and reactive water repellent coating for protection heritage structure surfaces;Providing and applying on a well prepared vertical /Horizontal surface which is solvent free liquid based on a monomeric alkylalkoxysilane. The amount to be applied depends to a large extent on how absorbent the substrate is. In practice it has to be determined by a trial impregnation. The product shall be based on pure silane formulation and free of siloxane and solvents.The material shall be mixed and applied fully in accordance with the manufacturer's instructions. All scaffolding ladders supporting materials etc. complete. Rates shall be inclusive of all labour materials tools and plant etc. complete. |
| 39 | Pitch extended epoxy coating to protect marine and waste water handling structures coal tar epoxy protection coating in splash zone sewage treatment plants;Providing and applying on a well prepared concrete surface which is high build pitch extended epoxy a 100% solids solvent free tough abrasion resistant protective coating. The product shall exhibit excellent bond strength with the substrate at least exceeding 2.5 MPa when tested as per ASTM D4541. The product shall be formulated to have high build thickness exceeding 150 microns per coat on average and shall be applied to achieve overall thickness of 300 microns in two coats. The product shall be formulated to resist exposure to accelerated weathering test as per ASTM D4587 and shall not exhibit any flaking or blistering. All scaffolding ladders supporting materials etc. complete. Rates shall be inclusive of all labour materials tools and plant etc. complete. |
| 40 | Providing and fixing white vitereous china pedestal type (Europen type) water closet with seat as lid whth C.I. brass hinges and rubber fitings 15 lts white vitreous china low level flushing cistern with fittings as brackets 40 mm white precelain 3enameled flush bad 25 mm overflow pipe with specials and mosquito proof coupling of approved municipal design complete including cutting and making good the walls and floors where required.;W.C. pan with white plastic seat and lid |
| 41 | Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern 32 mm diameter M.I. or C.P. brass trap and union complete including cutting and making good the walls where required.;Flat back wash basin size 630x 450mm with a single 15 mm C.P. brass pillar taps. |
| 42 | Providing & fixing 600 x 120 mm glass shelf with C. P. brass brackets and guard rail complete fixed to wooden cleats with C. P. brass screws. |
| 43 | Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws;750 x 20 mm size |
| 44 | Providing and fixing toilet paper holder :;C.P. brass |
| 45 | Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws;Plastic container |
| 46 | Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw |
| 47 | Providing and fixing ball valve (brass) of approved quality :;High pressure with P.V.C. floats:;25mm nominal bore |
| 48 | Providing and fixing non-return valve of approved quality :;25 mm nominal bore |
| 49 | Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore:;45 cm (18\\") length . |
| 50 | Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet:;150 mm diameter. |
| 51 | Providing and fixing rigid PVC S.W.R. (soil waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:;110 mm dia |
| 52 | Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :a) 100 mm dia |
| 53 | \\"Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :\\" a)110 mm dia |
| 54 | Providing and fixing single \\"Y\\" of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete with door :;110 mm dia |
| 55 | Providing and fixing double \\"Y\\" of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete without door :;110 mm dia |
| 56 | Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete without door :;110 mm dia |
| 57 | Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;1993;15mm nominal bore |
| 58 | Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993;15mm nominal bore |
| 59 | Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993;15mm nominal bore |
| 60 | Providing and fixing NICKEL chrome plated copper alloy Fancy wall mixer with 3 IN 1 SYSTEM WITH 115MM long bend pipe for connection to over head shower Jaquar make or equivalent. Confirming to IS 8931;1993 |
| 61 | Providing and fixing NICKEL chrome plated copper alloy Fancy TELEPHONIC SHOWER 1.5M FLEXIBLE TUBE WITH SWINGING WALL HOOK Jaquar make or equivalent. Confirming to IS 8931;1993 |
| 62 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.;25 mm dia nominal outer dia pipes. |
| 63 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.;32 mm dia nominal outer dia pipes. |
| 64 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement trenching refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe);25 mm nominal outer dia pipes. |
| 65 | Providing and fixing Hand Shower (Health Faucet) with 8mm dia ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards. |
| 66 | Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore. |
| 67 | Providing and fixing ASTM UPVC pipe conforming to ASTM 2467 with ISO 14001 including all UPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall.;SCH-40(blue)/(white);25mm outer dia. |
| 68 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform vanity counter and similar location in marble/Granite/Cuddapah stone work including necessary holes for pillar taps etc. including moulding rubbing and polishing of cut edges etc. complete. |
| 69 | (A) By tipper truck including loading unloading and stacking;(A) Limebuilding rubbish manure sludge moorum excavated rock;Limemoorum building rubbish;1KM |
| 70 | Providing and fixing netlon mosquito protection screen including coast of velcrow etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender