Tender For maintenance and repair To Iphb At Bambolim. S.H:- Urgent Maintenance And Repair Works In Iphb Premises At Bambolim.
Tender Value
11.80 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
4 days left
EMD
23620
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance and repair To Iphb At Bambolim. S.H:- Urgent Maintenance And Repair Works In Iphb Premises At Bambolim.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including up rooting of rank vegetation grass bush wood trees and sapling of girth upto 30 cm. measured at a height of 1 m above ground level & removal of rubbish upto a distance of 50 mt. outside the periphery of the area cleared. (if however only grass is met with the area will be measured and paid for under item 4001). |
| 2 | Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area |
| 3 | Cutting of branches of trees Beyond 30 cm and upto 60 cm girth & stacking the serviceable material and disposal of unserviceable material for all leads : |
| 4 | (A) By tipper truck including loading unloading and stacking;(A) Limebuilding rubbish manure sludge moorum excavated rock;Limemoorum building rubbish;Beyond 5 upto 10 km per km |
| 5 | Cleaning the night soil waste chamber, sludge and other waste by removing the cover slabs and relaying including disposal of sludge by excavating pits and covering the same with mud as per directions of Engineer in charge |
| 6 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1: 1 1/2:3 mix (1 cement: 1 1/2 coarse sand ;3 graded stone aggregate 20mm nominal size foundation concrete 1:1 1/2:3 mix (1 cemet ;1 1/2 coarse sand :8 graded stone agrregate 20mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design.;Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg). |
| 7 | Proving and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 10 litres high level P.V.C. flushing cister (of approved make) with fittings rack bolts 32 mm diameter P.V.C telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon pull complete cutting and making good the walls and floors where required.;Long pan pattern W. C. Pan |
| 8 | Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) with fittings rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete cutting and making good the walls ad floors where required.;W.C. pan with white plastic seat and lid. |
| 9 | Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern 32 mm diameter M.I. or C.P. brass trap and union complete including cutting and making good the walls where required.;Flat back wash basin size 630x 450mm with a single 15 mm C.P. brass pillar taps. |
| 10 | Providing and fixing ball valve (brass) of approved quality :;Low pressure with copper. floats :;25mm nominal bore |
| 11 | Providing and fixing ASTM UPVC pipe conforming to ASTM 2467 with ISO 14001 including all UPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall.;SCH-40(blue)/(white);25mm outer dia. |
| 12 | Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993;15mm nominal bore |
| 13 | Suction and disposal of night soil by sewage suction tanker of 6000litres capacity including Govt dumping charges, 20m hose pipe and attendant for vehicle suction. |
| 14 | Cleaning of overhead sintex tank of 1000litre capacity by dewatering sludge removal & manual cleaning and making the tank surface clean complete including cost of required quantity of anti bacterial agents complete as per direction of Engineer in charge. |
| 15 | Cleaning and disinfection of water storage tanks ( sump tank, fire tank, Overhead R.C.C tanks) through mechanized high pressure cleaning, mechanized dewatering sludge removal, vaccum cleaning, anti bacterial spray, UV radiation etc. complete including all labour. Hire charges of submersible pump, sludge pump, high pressure cleaning machine generating pressure of around 120,140 bars, wet and dry vaccum cleaners, UV lamps, vehicles for transportation of machinery and staff and also including cost of required quantity of anti bacterial agents etc complete. a) P.W.D water sump tank. |
| 16 | Cleaning and disinfection of water storage tanks ( sump tank, fire tank, Overhead R.C.C tanks) through mechanized high pressure cleaning, mechanized dewatering sludge removal, vaccum cleaning, anti bacterial spray, UV radiation etc. complete including all labour. Hire charges of submersible pump, sludge pump, high pressure cleaning machine generating pressure of around 120,140 bars, wet and dry vaccum cleaners, UV lamps, vehicles for transportation of machinery and staff and also including cost of required quantity of anti bacterial agents etc complete. b) Overhead resorvior. |
| 17 | 20 MM DOOR SHUTTER:-;Providing & fixing 20 mm door shutter Yashashri make or equivalent made by using 20mm x 155mm x 1.2mm upvc multi-cavity section and boarder of 30mm x 40mm x 2.5mm Upvc multi cavity section. The corners are joined by inserting polymetric corners & hardware used for fixing the door shutter is stainless steel hinges & S. S. handle & S.S. tower bolt. The average weight of 20mm door shutter is 4.60kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods. |
| 18 | UPVC ONLY DOOR FRAME:-;Providing & fixing Upvc Door Frame Yashashri make or equivalent made out of Upvc extruded multi cavity frame of 60 mm x 60mm x 2mm wall thickness. Frame is reinforced with G.I. Channel & welded in corners with Average weight 0.80 kg per running mtr. These frames are tested by using BS 2782 & DIN 53459 test methods. |
| 19 | Removing and refixing of door/ window shutters paneled or paneled and glazed including replacing of existing hionges chiseling etc complete as directed by Engineer - in - charge;Above 1 Sq.m area |
| 20 | FRP (Fiber Reinforced Polymer) Frames with Wood Finish Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company. c)4\\" x 2 ½ \\" |
| 21 | Standard Wood Core Door Shutter with Single Colour. Manufacture Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood moisture less than 17% wood styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps).The core of Shutter will be filled with MR2nd grade Block Board. The shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 - 2015 certified factory. Accessories: i) S. S. Hinges 4\\"- 3 Nos ii) S. S. Latch - 1 No iii) Tower Bolt 5\\" - 2 Nos iv) Handle 5\\" - 2 Nos Note: For 35 & 40mm thickness shutters only frames of 5 x 2 ½ Cross section frames to be used.;Shutter Thickness;35mm |
| 22 | Providing woodwork in frames of doors windows clerestory windows trusses & other frames wrought framed and fixed in positon.;Second class Indian teak wood |
| 23 | Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors windows and clerestory window including anodized aluminium butt hinges with necessary screws:;Second class Indian teak wood |
| 24 | Providing and fixing brass bib cock (heavy) of approved quality :;15 mm nominal bore |
| 25 | Providing and fixing Prince or equivalent make PVC SWR half round eaves gutter with bolts, nuts and flat iron brackets 40 x 3 mm size complete.c) 250 mm nominal size |
| 26 | Extra for providing and fixing prince or equivalent make PVC SWR joint bracket with 2 clamps for socketed half round eaves gutters.;140 mm nominal size |
| 27 | Providing and fixing on wall face C.I.. rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (1 cement: 2 fine sand);150mm dia pipe |
| 28 | Filling potholes and patch repairs with open graded premix material and removal of all failed material trimming of completed excavation to provide firm vertical faces cleaning of surface painting of tack coat with bitumen emulsion @ 0.24 kg/sq.m on the sides and base of excavation as per Clause 503 back filling the pot-holes with hot bituminious content @ 1.46 kg/m2 as per clause 511 compacting trimming and finishing the surface average thickness of 50mm to form a smooth continous surface all as per MORTH Specification 3004.2 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender