Tender For Construction Of 01(One) Tts Barrack Size (40X20), Half Wall, Galvalume Sheet Walling & Roofing, With 4 Front Verandah At Hqr.15Th Bn Tsr (Ir-Xi), Saidabari, , Unakoti District/Barrack No.01
Tender Value
8.98 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
18 days left
EMD
17967
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Unakoti → Tripura
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 01(One) Tts Barrack Size (40X20), Half Wall, Galvalume Sheet Walling & Roofing, With 4 Front Verandah At Hqr.15Th Bn Tsr (Ir-Xi), Saidabari, , Unakoti District/Barrack No.01
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.- All kind of soil. |
| 2 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable metod complete. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level: (i) 1:3:6 (1 Cement : 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level: (ii) 1:2:4 (1 Cement : 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
| 5 | First class brick work in foundation and plinth including cost of all materials as required complete:- In cement mortar 1:4 (1 Cement : 4 fine sand). |
| 6 | Centering shuttering including struttings, propping etc. and removal of form work for: (i) Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank. |
| 7 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil. |
| 8 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plnth, sides of foundation etc. complete. |
| 9 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4(1Cement : 4 fine sand). |
| 10 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.(i) Hot finished welded type tubes. |
| 11 | Providing and fixing muli bamboo champakampa tarja (75 mm wide) ceiling, strengthening with single split bamboo battens (both side) at 300 mm centre to centre and tied with G.I. wire 1.0 mm complete (over required beams or fixed with a frame of suitable type, which will be paid separately) as per specification. |
| 12 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:- (i) In grating, frames, guard bar, railing, brackets, gates and similar works, all complete |
| 13 | 12 mm cement plaster of mix (i) Cement mortar 1:4 (1 cement: 4 fine sand) |
| 14 | 15 mm cement plaster on the rough side of single or half brick wall of mix: (i) Cement mortar 1:4 (1 cement: 4 fine sand) |
| 15 | Providing and laying flat brick flooring in cement mortar including cement slurry etc. complete.A) In cement mortar 1:4 (1 cement: 4 fine sand). |
| 16 | 12 mm cement plaster of mix in/c. neat cement punning (i) Cement mortar 1:4 (1 cement: 4 fine sand) |
| 17 | Supply and installation of pre-prainted Galvalume sheets for roofing/ cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550 mpa sheel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% AI and 1.5% Silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality Poyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/ self tapping screws of size (5.5x55mm) with EPDM washers filled with white lead complete upto any pitch in horizotal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and as per direction of Engineer-in-charge.(i) 0.50 mm thinckness. |
| 18 | Supply and installation of pre-painted Galvalume sheets roofing accessories in 550 mpa steel grade, made out of Cold rolled steel coated with Zinc Aluminium alloy coating of 43.5% Zn, 55% AI and 1.5% Silicon confirming to AASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality polyester coating, top coated of midified polyester of 20 micron on both side etc. complete as per direction of Engineer-in-charge. Sheet should have protective guard film of 25 microns miniumum to avoid scratches while transpotation. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. The sheet shall be fixed using self drilling/ self tapping screws with EPDM washers complete for Ridges/ Valley/ Gutter/ Flasshing of width 610 mm:(a) 0.40 mm thickness. |
| 19 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 grams/ litre, of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 20 | Finishing walls with premium acrylic smooth exterior paint with Silicon additives of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: New work (two or more coats applied @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 sqm). |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender