Tender For Execution Of Mechanical And Electrical Repairs To Various Road Constructional Machinery Of Mechanical And Hospital Division Anantnag.
Tender Value
2.50 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
0 days left
EMD
5000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Execution Of Mechanical And Electrical Repairs To Various Road Constructional Machinery Of Mechanical And Hospital Division Anantnag.
BOQ
| Sl. No. | Item Description |
| 1 | Mechanical repair and allied works. |
| 2 | Complete machining of Engine block; including fitting of crank-shaft to cylinder block, straightening of crank-shaft & finishing of crank-shaft, fitting of connecting rod bushes, setting of main & connecting rod bearings, cylinder head seat cutting, fitting of new valve guides, head seats, finishing & setting of inlet & exhaust valves. The job also including leak testing of cylinder heads and allied works. |
| 3 | Finishing & turning of Bushes (back-wheel) to appropriate size as per sample. |
| 4 | Finishing & turning of Front Wheel Bushes to appropriate size as per sample. |
| 5 | Finishing & turning of Pinion Bushes to appropriate size as per sample. |
| 6 | Finishing & turning of Housing bushes to appropriate size as per sample. |
| 7 | Drilling of 40 No. holes on circumference of driving ring as per sample. |
| 8 | Repairs to radiator assembly by way of cleaning, descaling, washing for detecting leakage. The job also includes testing of radiator at desired pressure. |
| 9 | Repairs to Self Starter 12 Volt of Road Roller by way of removing of old damaged/wornout parts then providing and fitment of new spare parts as mentioned below : |
| 10 | Providing and Fitting of Self Starter Bush Set.. |
| 11 | Providing and Fitting of Carbon Brush Set ( 04 pcs). |
| 12 | Providing and Fitting of Carbon Brush Holder . |
| 13 | Providing and Fitting of Solenoid Switch 12 Volt. |
| 14 | Providing and Fitting of Bendix gear as per sample.. |
| 15 | Providing and Fitting of Field Coil set (4 Pcs). |
| 16 | Providing and Fitting of Armature Assembly. |
| 17 | Providing and Fitting of Brush Cup. |
| 18 | Providing and Fitting of Self Housing. |
| 19 | Providing and Fitting of Self Starter Shifter/Folk. |
| 20 | Repairs to Alternator Assembly. 12 Volt of Road Roller by way of providing and fitment of following : |
| 21 | Rectifier Plate |
| 22 | Cut Out |
| 23 | Carbon Brush set ( 04 pcs). |
| 24 | Carbon Brush Holder |
| 25 | Stator Assembly |
| 26 | Rotor Assembly |
| 27 | Bearing 6202 |
| 28 | Bearing 6203 |
| 29 | Bearing 6205 |
| 30 | Alternator Cup |
| 31 | Alternator Pulley as per sample |
| 32 | Alternator Holder set |
| 33 | Starting Switch with Key |
| 34 | Ampere Meter |
| 35 | Starting Switch Push Button Type |
| 36 | Repairs to Self Starter (12 Volt) and Alternator by way of Providing and Fitting of following: Tandem Vibratory Roller (TVR) & Soil Compactor items. |
| 37 | Solenoid Switch 12 Volt . |
| 38 | Self Bendex . |
| 39 | Self Bush (Set of 04Pcs) |
| 40 | Carbon Brush Set ( 04 pcs) . |
| 41 | Rocker . |
| 42 | Armature. |
| 43 | Coil . |
| 44 | Cut Out . |
| 45 | Rectifier Plate . |
| 46 | Armature Stator . |
| 47 | Armature Rotor . |
| 48 | Alternator Complete assembly . |
| 49 | Bearing No: 6203/ 6204. |
| 50 | Repairs to Hydraulic side by way of Providing and Fitting of following items: (Tandem Vibratory Roller (TVR) & Soil Compactor) |
| 51 | Providing and Fitting of Pump repair kit part No. 00851124RK |
| 52 | Providing and Fitting of maintenance kit part No. 00379719 |
| 53 | Providing and Fitting of Parking brake kit part No. PP11108 |
| 54 | Providing and Fitting of Providing and fitting of High Pressure Hydraulic hoses (OEM recommended make) |
| 55 | Providing and Fitting of Providing and fitting of bearing no: 16028. (Make: OEM recommended) |
| 56 | Providing and Fitting of Providing and fitting of hand brake lever |
| 57 | Providing and Fitting of Providing and fitting of hydraulic hose for travel motor and vibratory motor (08 No.'s) |
| 58 | In line Fuel Injection Pump 4 Cyclinder for Perkin P4 Engine |
| 59 | Complete overhauling of F.I. pump In line Fuel Injection Pump 4 Cyclinder for Perkin P4 Engine |
| 60 | Providing and fitting of 4 No.'s Element |
| 61 | Providing and fitting of 4 No.'s Delivery valve |
| 62 | Providing and fitting of 4 No.'s Nozzles 400 |
| 63 | Providing and fitting of Nozzle |
| 64 | Pump calibration |
| 65 | In line Fuel Injection Pump 4 Cyclinder for Simson S4 Engine |
| 66 | Complete overhauling of F.I. pump (S4) |
| 67 | Providing and fitting of Element 4 No.'s |
| 68 | Providing and fitting of Delivery valve 4 No.'s |
| 69 | Providing and fitting of Nozzle 4 No.'s |
| 70 | Providing and fitting of Distance piece 4 No.'s |
| 71 | Providing and fitting of Pump service kit |
| 72 | Pump calibration |
| 73 | In line Fuel Injection Pump 6 Cyclinder for Kirlosker K6 Engine |
| 74 | Complete overhauling of F.I. pump |
| 75 | Providing and fitting of Element 6 No.'s |
| 76 | Providing and fitting of Distance piece 6 No.'s |
| 77 | Providing and fitting of Nozzle, 6 No.'s |
| 78 | Providing and fitting of Flyweight Assembly 9413 035 256 |
| 79 | Pump calibration |
| 80 | Repairs to Chassis side and allied works |
| 81 | Providing and fitting of water pump complete with part No. 851124 for TVRHD85 complete with hose, nipples, fittings etc as deemed fit for operation of pump |
| 82 | Providing and fitting of sprinkler nozzles compatible with part No. 394297 of TVR HD85 |
| 83 | Providing and fitting of Hose pipe compatible with TVR HD85 part No. 107441 with clamps etc |
| 84 | Providing and fitting of clutch die 2 No.'s |
| 85 | Clutch Yoke with Shaft repair by way of remetalling grinding and aligning. |
| 86 | Clutch driver repairs by way of remetalling, bush fitting and PDC rebuilding. |
| 87 | Clutch rod repair by way of remetalling grinding and aligning. |
| 88 | Clutch lever repair by way of aligning |
| 89 | Feed Pump Repair by Providing and Fitting of kit set |
| 90 | Pinion shaft repairs by making bush seats |
| 91 | Repairs to Hind Axle: The Job includes turning, grinding and drilling and then remetalling where ever required to make even/uniform surface and making of four number bush seats also reboring for axle lock nut holes and rethreading and aligning of axle. Repairs to Front Axle by way of turning and grinding and then remetalling where ever required to make even/uniform surface and making of bush seats and also reboring for axle lock nut holes and aligning. |
| 92 | Repairs to Front Axle by way of turning and grinding and then remetalling where ever required to make even /uniform surface and making of bush seats and also reboring for axle lock nut holes and alinging of axle. |
| 93 | Fabrication of two no. trunnion pins for front fork bridge and locking plates 2 No.'s with proper holes for scraffer bolts . |
| 94 | Repairs to differentiual shaft bearing housing by remetalling grinding and finishing to make accurate size also boring and rethreading of bolts hole as per reqd.Fabrication of Plain washer -2 No.'s taper Sleeve -2 No.'s., washer Lock - 2 No.'s and Key - 2 No.'s .as per the direction of engineer at site. |
| 95 | Repairs to Differential Housing side, The Job includes replacemnet and refitting of new Pinion Gear L/Rside,Pinion Housing Bush left Side Inner and outer ,Pinion Housing Bush Outer Left side, Pinion Housing Bush R/Side, Oil seals, Differential shaft Bush and packing sheet etc. |
| 96 | Replacement of Engine Oil :- The job includes removing of old Engine oil and repouring of new engine oil 16 Ltrs having grade 20W 40 of reputed brand . The job also includes replacing and refitting of oil filter 01 No. and Diesel Filter 02 NO.'s as per required . If the material is issued by the department only labour charges of Rs. 1000 shall be paid then. |
| 97 | Replacement of Gear Oil :- The job includes removing of old Gear oil and repouring of new Gear engine oil 18 Ltrs having grade 80 W90 of reputed brand as per required . If the material is issued by the department only labour charges of Rs. 1000 shall be paid then. |
| 98 | Repairs to expansion bellow :- The Job includes dismentalling of old damaged expansion joint and fabrication of new bellow by gas welding / and revetting as per requirement. |
| 99 | Repairs to handle dog :- The job includes providing and fitting of gears and fabrication of bush seats , distance piece and lock nuts with nut and bolts and spring washer repairs as per requirement. |
| 100 | Repairs to clutch shaft and housing by turining of shaft and shaft housing grinding making two no. Bushes on brackets reboring of Clutch yock and Providing and fitting of 2 No.bushes on clutch yock for clutch shaft support as per requirement. |
| 101 | Repairs to Front and rear axles axle by cutting of un- even surface on axles then remetalling as per requirement , finishing , aligning and providing and fitting of M.S, washer also providing / fitting of two no. lock nuts on two sides. as per requirement. |
| 102 | Repairs to Front Fork and steering Quadrant, The Job includes removing of old damaged fork pin by drilling, welding and reboring and then Fabrication of Pin 1 No. Fabrication of shoulder Ring, washer , Key Gid Dh. Rectangular and key Rectangular Parallel Rounded ended as per requirement. |
| 103 | Repairs to Fore carriage and steering operating gears, The Job includes Fabrication of Steering Spindle with Key 2 No.'s. Brackets R.H and L.H Stops for steering 2 No .; s Fabrication of Worm Shaft Keys 3 No .: sas per requirement. |
| 104 | Providing and fitting of Angle iron Support to End Plate frame and fab. of rear side plate L.H also repairs to hinge cover plate by denting and welding as per requiremnent. |
| 105 | Repairs to Bonnet and side Plates by Denting and welding of Cracked Portions . Repairs to Front and rear Bonnet Side Doors by Denting and Welding. Providing and Fitting of Locking plate and fabrication of Foot step.as per requirement. |
| 106 | Fabrication of door Knob ( for Front filling plates Spindle and Latch for side doors foot step as per requirement. |
| 107 | Fabrication of Tail Pieces both ends by removing of old damaged worn out ends and Providing and fitting of new ends by welding and also fitting of nutsand bolts and make accurate alignment of both ends for proper running of engine and clutch working as per requiremnent. |
| 108 | Repairs to Radiator by way of removing of dents and gas welding of old worn- out/damaged radiator core also cleaning removing of scale from fins of core and then providing and fitting of new side frames for support of radiator core, repairs to both water tank jackets by welding and cleaning and fitting of 2 No. gasket units. Replacement of old worn -out bolts with new bolts and nuts. also Providing and Fitting of 1 No. Drain cock. |
| 109 | Repairs to clutch slide assemby by remving of old 3 No.'s bushes and fitting of new bushes also repairs to Mud ring by reboring of mudring lock nut and then rethreading and Providing of lock nut |
| 110 | The Paint Work :- The Job Includes removing of old unwanted paint by scraping and sand papering of surface for smoothing and finishing including necessary repairs to scratches . Then applying Primer coat with ready mixed metal primer of approved brand and then providing and applying of spray metal orange colour paint of approved brand and manufacturer to give an even shade two or more coats. The whole job should be applied to all parts of the road roller i.e. On front Top Cover , Sides border and support , Clutch cover unit , Fuel tank cover and support , Engine cover unit, L.R and R.H awning Assembly . Inspection cover , Hind Axle Cover and stay |
| 111 | Repairs to ballast weight for hind axle L.H by remetalling on axle housing and providing and fitting of M.s, washer and cutting of un- even surface and providing and fitting of two no. lock nuts on two sides. |
| 112 | Repairs to Gear Box Fist Inter Shaft by way of drilling, boring and making of grooves on the shaft periphery. The job includes providing and embedding of flange for fastening of broken shaft, and welding together both ends with precise fitment. The job also requires grinding /finishing for removing of unwanted material and then aligning so that gears mesh accurately |
| 113 | Repairs to Differential shaft bearing Housing by remetalling and then grinding/finishing to make accurate size for bearing fitment also reboring and making of threads on housing as per requirement. The job includes Fabrication of Plain Washer -2 No., Tapper Sleeve -2 No.'s Washer Lock - 2 N0.'s and Key - 2 N0.'s. |
| 114 | Head Light and Tail Light cover. The job includes providing, fabrication and fitting of head & tail light box on L.H & R.H of the machine with M.S plate and Mesh on the front side of lamp assembly, also Providing and fitting of angle iron M.S Plate of the rear side plate for light /fog light safeguard of the machine as per requirement. |
| 115 | Locking arrangement:-The job includes Fabrication and fitting of Hinge type locks arrangement for safeguard of Diesel and water tank also providing fabrication and fitting of M.S plate with complete locking arrangement for protection of battery at the rear side of the machine as per required. |
| 116 | Dismantling of damaged windows from broken out hinges and then removing of broken windows panes. The job then includes removing of dents on side frame of the window by heat treatment, Beating as per requirement for proper alignment and fitment on the machine/fitting of lock system and handle , the job also includes providing and fitting of laminated Glass pane of Size 60x53 cm. |
| 117 | Providing and fitting of head light and tail light cover 4 N0.'s of M.S.- 18 gauge sheet and with mesh type cover on front for the protection of lights as per requirement. |
| 118 | Providing and Fitting of operators seat. The Job includes making of seat cover having denlop cushion on back rest and underneath. The material of the seat should be hard-wearing canvas type water proof as per requirement. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender